x-load_git:add patch for am3517-crane board support

* This patch adds x-load support for am3517-crane board. * Craneboard is a hardware development platform based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a low cost reference design. * You can find more about CraneBoard here: [1] http://www.ti.com/arm [2] http://www.mistralsolutions.com/products/craneboard.php [3] http://www.craneboard.org Signed-off-by: Anil kumar M <anilm@mistralsolutions.com> Signed-off-by: Koen Kooi <koen@openembedded.org>
author: Anil kumar M <anilm@mistralsolutions.com> 2010-12-20 19:54:31 +0530
committer: Koen Kooi <koen@openembedded.org> 2010-12-20 16:17:58 +0100
commit: db5a2f7791b100834588a0a22e089b057702c677 (patch)
tree: 6c09428f43c1f113b282f129e47995381c28914c /recipes/x-load
parent: c5cc3368f3f8f0ddbae4598066ef59d77fbed7be (diff)
download: openembedded-db5a2f7791b100834588a0a22e089b057702c677.tar.gz
2 files changed, 2668 insertions, 1 deletions
diff --git a/recipes/x-load/x-load-git/am3517-crane/0001-Added-support-for-AM3517-CraneBoard.patch b/recipes/x-load/x-load-git/am3517-crane/0001-Added-support-for-AM3517-CraneBoard.patch
new file mode 100644
index 0000000000..7755fa910d
--- /dev/null
+++ b/recipes/x-load/x-load-git/am3517-crane/0001-Added-support-for-AM3517-CraneBoard.patch
@@ -0,0 +1,2660 @@
+From 45449d9eea0542713eb136eb576a7f7e19df57b9 Mon Sep 17 00:00:00 2001
+From: Anil Kumar <anilm@mistralsolutions.com>
+Date: Fri, 26 Nov 2010 20:01:43 +0530
+Subject: [PATCH] Added support for AM3517 CraneBoard
+
+Signed-off-by: Anil Kumar <anilm@mistralsolutions.com>
+---
+ Makefile                          |   11 +
+ board/am3517crane/Makefile        |   49 +++
+ board/am3517crane/am3517crane.c   |  864 +++++++++++++++++++++++++++++++++++++
+ board/am3517crane/am3517crane.h   |  103 +++++
+ board/am3517crane/config.mk       |   20 +
+ board/am3517crane/platform.S      |  436 +++++++++++++++++++
+ board/am3517crane/x-load.lds      |   53 +++
+ common/Makefile                   |   50 +++
+ common/cmd_load.c                 |  537 +++++++++++++++++++++++
+ common/cmd_load.h                 |   47 ++
+ cpu/omap3/mmc.c                   |    3 +-
+ drivers/Makefile                  |    4 +
+ drivers/k9f1g08r0a.c              |   39 +--
+ include/asm/arch-omap3/cpu.h      |    6 +-
+ include/asm/arch-omap3/mem.h      |    9 +-
+ include/asm/arch-omap3/omap3430.h |    3 +-
+ include/configs/am3517crane.h     |  200 +++++++++
+ 17 files changed, 2401 insertions(+), 33 deletions(-)
+ create mode 100644 board/am3517crane/Makefile
+ create mode 100644 board/am3517crane/am3517crane.c
+ create mode 100644 board/am3517crane/am3517crane.h
+ create mode 100644 board/am3517crane/config.mk
+ create mode 100644 board/am3517crane/platform.S
+ create mode 100644 board/am3517crane/x-load.lds
+ create mode 100644 common/Makefile
+ create mode 100644 common/cmd_load.c
+ create mode 100644 common/cmd_load.h
+ create mode 100644 include/configs/am3517crane.h
+
+diff --git a/Makefile b/Makefile
+index 4c94438..6bfae50 100644
+--- a/Makefile
++++ b/Makefile
+@@ -70,6 +70,7 @@ LIBS += lib/lib$(ARCH).a
+ LIBS += fs/fat/libfat.a
+ LIBS += disk/libdisk.a
+ LIBS += drivers/libdrivers.a
++LIBS += common/libcommon.a
+ .PHONY : $(LIBS)
+
+ # Add GCC lib
+@@ -152,6 +153,15 @@ omap3evm_config :	unconfig
+ am3517evm_config :       unconfig
+ 	@./mkconfig $(@:_config=) arm omap3 am3517evm
+
++am3517crane_config :       unconfig
++	@./mkconfig $(@:_config=) arm omap3 am3517crane
++
++am3517crane_download_config :       unconfig
++	@./mkconfig am3517crane arm omap3 am3517crane; \
++	echo "#define START_LOADB_DOWNLOAD" >> ./include/config-2.h; \
++	cat ./include/config.h >> ./include/config-2.h; \
++	mv ./include/config-2.h ./include/config.h
++
+ #########################################################################
+
+ clean:
+@@ -168,6 +178,7 @@ clobber:	clean
+ 	rm -f $(OBJS) *.bak tags TAGS
+ 	rm -fr *.*~
+ 	rm -f x-load x-load.map $(ALL)
++	rm -f x-load.bin.ift
+ 	rm -f include/asm/proc include/asm/arch
+
+ mrproper \
+diff --git a/board/am3517crane/Makefile b/board/am3517crane/Makefile
+new file mode 100644
+index 0000000..46a5b46
+--- /dev/null
++++ b/board/am3517crane/Makefile
+@@ -0,0 +1,49 @@
++#
++# (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++# Umesh Krishnan <umeshk@mistralsolutions.com>
++#
++# This file is copied from board/am3517evm/Makefile
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB	= lib$(BOARD).a
++
++OBJS	:= am3517crane.o
++SOBJS	:= platform.o
++
++$(LIB):	$(OBJS) $(SOBJS)
++	$(AR) crv $@ $^
++
++clean:
++	rm -f $(SOBJS) $(OBJS)
++
++distclean:	clean
++	rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+diff --git a/board/am3517crane/am3517crane.c b/board/am3517crane/am3517crane.c
+new file mode 100644
+index 0000000..a6006d3
+--- /dev/null
++++ b/board/am3517crane/am3517crane.c
+@@ -0,0 +1,864 @@
++/*
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * This file is copied from board/am3517evm/am3517evm.c
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++#include <common.h>
++#include <command.h>
++#include <part.h>
++#include <fat.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/bits.h>
++#include <asm/arch/mux.h>
++#include <asm/arch/sys_proto.h>
++#include <asm/arch/sys_info.h>
++#include <asm/arch/clocks.h>
++#include <asm/arch/mem.h>
++#include "am3517crane.h"
++
++/* Used to index into DPLL parameter tables */
++struct dpll_param {
++	unsigned int m;
++	unsigned int n;
++	unsigned int fsel;
++	unsigned int m2;
++};
++
++/*******************************************************
++ * Routine: delay
++ * Description: spinning delay to use before udelay works
++ ******************************************************/
++static inline void delay(unsigned long loops)
++{
++	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
++			  "bne 1b" : "=r" (loops) : "0"(loops));
++}
++
++/*****************************************
++ * Routine: board_init
++ * Description: Early hardware init.
++ *****************************************/
++int board_init(void)
++{
++	return 0;
++}
++
++/* TODO: Move it to common place so that should be used
++ * for all OMAP series of devices
++ */
++u32 is_cpu_family(void)
++{
++	u32 cpuid = 0, cpu_family = 0;
++	u16 hawkeye;
++
++	cpuid = __raw_readl(OMAP34XX_CONTROL_ID);
++	hawkeye  = (cpuid >> HAWKEYE_SHIFT) & 0xffff;
++
++	switch (hawkeye) {
++	case HAWKEYE_AM35XX:
++	default:
++		cpu_family = CPU_AM35XX;
++		break;
++	}
++	return cpu_family;
++}
++/*************************************************************
++ *  get_device_type(): tell if GP/HS/EMU/TST
++ *************************************************************/
++u32 get_device_type(void)
++{
++	int mode;
++	mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK);
++	return mode >>= 8;
++}
++
++/************************************************
++ * get_sysboot_value(void) - return SYS_BOOT[4:0]
++ ************************************************/
++u32 get_sysboot_value(void)
++{
++	int mode;
++	mode = __raw_readl(CONTROL_STATUS) & (SYSBOOT_MASK);
++	return mode;
++}
++/*************************************************************
++ * Routine: get_mem_type(void) - returns the kind of memory connected
++ * to GPMC that we are trying to boot form. Uses SYS BOOT settings.
++ *************************************************************/
++u32 get_mem_type(void)
++{
++	u32   mem_type = get_sysboot_value();
++	switch (mem_type) {
++
++	case 1:
++	case 12:
++	case 15:
++	case 21:
++	case 27:
++		return GPMC_NAND;
++	case 13:
++	case 16:
++	case 17:
++	case 18:
++	case 24:
++		return MMC_NAND;
++	default:
++		return GPMC_NAND;
++	}
++}
++
++/******************************************
++ * get_cpu_rev(void) - extract version info
++ ******************************************/
++u32 get_cpu_rev(void)
++{
++	u32 cpuid = 0;
++	/* On ES1.0 the IDCODE register is not exposed on L4
++	 * so using CPU ID to differentiate
++	 * between ES2.0 and ES1.0.
++	 */
++	__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0" : "=r" (cpuid));
++	if ((cpuid  & 0xf) == 0x0)
++		return CPU_3430_ES1;
++	else
++		return CPU_3430_ES2;
++
++}
++
++/*****************************************************************
++ * sr32 - clear & set a value in a bit range for a 32 bit address
++ *****************************************************************/
++void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
++{
++	u32 tmp, msk = 0;
++	msk = 1 << num_bits;
++	--msk;
++	tmp = __raw_readl(addr) & ~(msk << start_bit);
++	tmp |=  value << start_bit;
++	__raw_writel(tmp, addr);
++}
++
++/*********************************************************************
++ * wait_on_value() - common routine to allow waiting for changes in
++ *   volatile regs.
++ *********************************************************************/
++u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
++{
++	u32 i = 0, val;
++	do {
++		++i;
++		val = __raw_readl(read_addr) & read_bit_mask;
++		if (val == match_value)
++			return 1;
++		if (i == bound)
++			return 0;
++	} while (1);
++}
++
++/*********************************************************************
++ * config_emif4_ddr() - Init/Configure DDR on AM3517 EVM board.
++ *********************************************************************/
++void config_emif4_ddr(void)
++{
++	unsigned int regval;
++
++	/* Set the DDR PHY parameters in PHY ctrl registers */
++	regval = (EMIF4_DDR1_RD_LAT | (EMIF4_DDR1_PWRDN_DIS << 6) |
++		(EMIF4_DDR1_STRBEN_EXT << 7) | (EMIF4_DDR1_DLL_MODE << 12) |
++		(EMIF4_DDR1_VTP_DYN << 15) | (EMIF4_DDR1_LB_CK_SEL << 23));
++	__raw_writel(regval, EMIF4_DDR_PHYCTL1);
++	__raw_writel(regval, EMIF4_DDR_PHYCTL1_SHDW);
++
++	regval = (EMIF4_DDR2_TX_DATA_ALIGN | (EMIF4_DDR2_RX_DLL_BYPASS << 1));
++	__raw_writel(regval, EMIF4_DDR_PHYCTL2);
++
++	/* Reset the DDR PHY and wait till completed */
++	sr32(EMIF4_IODFT_TLGC, 10, 1, 1);
++	/*Wait till that bit clears*/
++	while ((__raw_readl(EMIF4_IODFT_TLGC) & BIT10) == 0x1)
++		;
++	/*Re-verify the DDR PHY status*/
++	while ((__raw_readl(EMIF4_SDRAM_STS) & BIT2) == 0x0)
++		;
++
++	sr32(EMIF4_IODFT_TLGC, 0, 1, 1);
++	/* Set SDR timing registers */
++	regval = (EMIF4_TIM1_T_WTR | (EMIF4_TIM1_T_RRD << 3) |
++		(EMIF4_TIM1_T_RC << 6) | (EMIF4_TIM1_T_RAS << 12) |
++		(EMIF4_TIM1_T_WR << 17) | (EMIF4_TIM1_T_RCD << 21) |
++		(EMIF4_TIM1_T_RP << 25));
++	__raw_writel(regval, EMIF4_SDRAM_TIM1);
++	__raw_writel(regval, EMIF4_SDRAM_TIM1_SHDW);
++
++	regval = (EMIF4_TIM2_T_CKE | (EMIF4_TIM2_T_RTP << 3) |
++		(EMIF4_TIM2_T_XSRD << 6) | (EMIF4_TIM2_T_XSNR << 16) |
++		(EMIF4_TIM2_T_ODT << 25) | (EMIF4_TIM2_T_XP << 28));
++	__raw_writel(regval, EMIF4_SDRAM_TIM2);
++	__raw_writel(regval, EMIF4_SDRAM_TIM2_SHDW);
++
++	regval = (EMIF4_TIM3_T_RAS_MAX | (EMIF4_TIM3_T_RFC << 4) |
++		(EMIF4_TIM3_T_TDQSCKMAX << 13));
++	__raw_writel(regval, EMIF4_SDRAM_TIM3);
++	__raw_writel(regval, EMIF4_SDRAM_TIM3_SHDW);
++
++	/* Set the PWR control register */
++	regval = (EMIF4_PWR_PM_TIM | (EMIF4_PWR_PM_EN << 8) |
++		(EMIF4_PWR_DPD_EN << 10) | (EMIF4_PWR_IDLE << 30));
++	__raw_writel(regval, EMIF4_PWR_MGT_CTRL);
++	__raw_writel(regval, EMIF4_PWR_MGT_CTRL_SHDW);
++
++	/* Set the DDR refresh rate control register */
++	regval = (EMIF4_REFRESH_RATE | (EMIF4_PASR << 24) |
++		(EMIF4_INITREF_DIS << 31));
++	__raw_writel(regval, EMIF4_SDRAM_RFCR);
++	__raw_writel(regval, EMIF4_SDRAM_RFCR_SHDW);
++
++	/* set the SDRAM configuration register */
++	regval = (EMIF4_CFG_PGSIZE | (EMIF4_CFG_EBANK << 3) |
++		(EMIF4_CFG_IBANK << 4) | (EMIF4_CFG_ROWSIZE << 7) |
++		(EMIF4_CFG_CL << 10) | (EMIF4_CFG_NARROW_MD << 14) |
++		(EMIF4_CFG_CWL << 16) | (EMIF4_CFG_SDR_DRV << 18) |
++		(EMIF4_CFG_DDR_DIS_DLL << 20) | (EMIF4_CFG_DYN_ODT << 21) |
++		(EMIF4_CFG_DDR2_DDQS << 23) | (EMIF4_CFG_DDR_TERM << 24) |
++		(EMIF4_CFG_IBANK_POS << 27) | (EMIF4_CFG_SDRAM_TYP << 29));
++	__raw_writel(regval, EMIF4_SDRAM_CFG);
++}
++
++/*************************************************************
++ * get_sys_clk_speed - determine reference oscillator speed
++ *  based on known 32kHz clock and gptimer.
++ *************************************************************/
++u32 get_osc_clk_speed(void)
++{
++	u32 start, cstart, cend, cdiff, val;
++
++	val = __raw_readl(PRM_CLKSRC_CTRL);
++	/* If SYS_CLK is being divided by 2, remove for now */
++	val = (val & (~BIT7)) | BIT6;
++	__raw_writel(val, PRM_CLKSRC_CTRL);
++
++	/* enable timer2 */
++	val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
++	/* select sys_clk for GPT1 */
++	__raw_writel(val, CM_CLKSEL_WKUP);
++
++	/* Enable I and F Clocks for GPT1 */
++	val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2;
++	__raw_writel(val, CM_ICLKEN_WKUP);
++	val = __raw_readl(CM_FCLKEN_WKUP) | BIT0;
++	__raw_writel(val, CM_FCLKEN_WKUP);
++
++	/* start counting at 0 */
++	__raw_writel(0, OMAP34XX_GPT1 + TLDR);
++	/* enable clock */
++	__raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR);
++	/* enable 32kHz source *//* enabled out of reset */
++	/* determine sys_clk via gauging */
++
++	/* start time in 20 cycles */
++	start = 20 + __raw_readl(S32K_CR);
++	/* dead loop till start time */
++	while (__raw_readl(S32K_CR) < start)
++		;
++	/* get start sys_clk count */
++	cstart = __raw_readl(OMAP34XX_GPT1 + TCRR);
++	/* wait for 40 cycles */
++	while (__raw_readl(S32K_CR) < (start + 20))
++		;
++	/* get end sys_clk count */
++	cend = __raw_readl(OMAP34XX_GPT1 + TCRR);
++	/* get elapsed ticks */
++	cdiff = cend - cstart;
++
++	/* based on number of ticks assign speed */
++	if (cdiff > 19000)
++		return S38_4M;
++	else if (cdiff > 15200)
++		return S26M;
++	else if (cdiff > 13000)
++		return S24M;
++	else if (cdiff > 9000)
++		return S19_2M;
++	else if (cdiff > 7600)
++		return S13M;
++	else
++		return S12M;
++}
++
++/******************************************************************************
++ * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
++ *   -- input oscillator clock frequency.
++ *
++ *****************************************************************************/
++void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
++{
++	if (osc_clk == S38_4M)
++		*sys_clkin_sel =  4;
++	else if (osc_clk == S26M)
++		*sys_clkin_sel = 3;
++	else if (osc_clk == S19_2M)
++		*sys_clkin_sel = 2;
++	else if (osc_clk == S13M)
++		*sys_clkin_sel = 1;
++	else if (osc_clk == S12M)
++		*sys_clkin_sel = 0;
++}
++
++/******************************************************************************
++ * prcm_init() - inits clocks for PRCM as defined in clocks.h
++ *   -- called from SRAM, or Flash (using temp SRAM stack).
++ *****************************************************************************/
++void prcm_init(void)
++{
++	u32 osc_clk = 0, sys_clkin_sel;
++	struct dpll_param *dpll_param_p;
++	u32 clk_index, sil_index;
++
++	/* Gauge the input clock speed and find out the sys_clkin_sel
++	 * value corresponding to the input clock.
++	 */
++	osc_clk = get_osc_clk_speed();
++	get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
++
++	sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
++
++	/* If the input clock is greater than 19.2M always divide/2 */
++	if (sys_clkin_sel > 2) {
++		sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
++		clk_index = sys_clkin_sel/2;
++	} else {
++		sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
++		clk_index = sys_clkin_sel;
++	}
++
++	/* The DPLL tables are defined according to sysclk value and
++	 * silicon revision. The clk_index value will be used to get
++	 * the values for that input sysclk from the DPLL param table
++	 * and sil_index will get the values for that SysClk for the
++	 * appropriate silicon rev.
++	 */
++	sil_index = get_cpu_rev() - 1;
++
++	/* Unlock MPU DPLL (slows things down, and needed later) */
++	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
++	wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
++
++	/* Getting the base address of Core DPLL param table*/
++	dpll_param_p = (struct dpll_param *)get_core_dpll_param();
++	/* Moving it to the right sysclk and ES rev base */
++	dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
++	/* CORE DPLL */
++	/* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
++	sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
++	wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
++	sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2);	/* m3x2 */
++	sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2);	/* Set M2 */
++	sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m);	/* Set M */
++	sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n);	/* Set N */
++	sr32(CM_CLKSEL1_PLL, 6, 1, 0);			/* 96M Src */
++	sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV);	/* l4 */
++	sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV);	/* l3 */
++	sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM);		/* reset mgr */
++	sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
++	sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK);		/* lock mode */
++	wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
++
++	/* Getting the base address to PER  DPLL param table*/
++	dpll_param_p = (struct dpll_param *)get_per_dpll_param();
++	/* Moving it to the right sysclk base */
++	dpll_param_p = dpll_param_p + clk_index;
++	/* PER DPLL */
++	sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
++	wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
++	sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2);	/* set M6 */
++	sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2);	/* set M5 */
++	sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2);	/* set M4 */
++	sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2);	/* set M3 */
++	sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2);	/* set M2 */
++	sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m);	/* set m */
++	sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n);	/* set n */
++	sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */
++	sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK);	/* lock mode */
++	wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
++
++	/* Getting the base address to MPU DPLL param table*/
++	dpll_param_p = (struct dpll_param *)get_mpu_dpll_param();
++	/* Moving it to the right sysclk and ES rev base */
++	dpll_param_p = dpll_param_p + 2*clk_index + sil_index;
++	/* MPU DPLL (unlocked already) */
++	sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2);	/* Set M2 */
++	sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m);	/* Set M */
++	sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n);	/* Set N */
++	sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel);	/* FREQSEL */
++	sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
++	wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
++
++	/* Set up GPTimers to sys_clk source only */
++	sr32(CM_CLKSEL_PER, 0, 8, 0xff);
++	sr32(CM_CLKSEL_WKUP, 0, 1, 1);
++
++	delay(5000);
++}
++
++/*****************************************
++ * Routine: secure_unlock
++ * Description: Setup security registers for access
++ * (GP Device only)
++ *****************************************/
++void secure_unlock(void)
++{
++	/* Permission values for registers -Full fledged permissions to all */
++	#define UNLOCK_1 0xFFFFFFFF
++	#define UNLOCK_2 0x00000000
++	#define UNLOCK_3 0x0000FFFF
++	/* Protection Module Register Target APE (PM_RT)*/
++	__raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
++	__raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
++	__raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
++	__raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
++
++	__raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
++	__raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
++	__raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
++
++	__raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
++	__raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
++	__raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
++	__raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
++
++	__raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
++}
++
++/**********************************************************
++ * Routine: try_unlock_sram()
++ * Description: If chip is GP type, unlock the SRAM for
++ *  general use.
++ ***********************************************************/
++void try_unlock_memory(void)
++{
++	int mode;
++
++	/* if GP device unlock device SRAM for general use */
++	/* secure code breaks for Secure/Emulation device - HS/E/T*/
++	mode = get_device_type();
++	if (mode == GP_DEVICE)
++		secure_unlock();
++	return;
++}
++
++/**********************************************************
++ * Routine: s_init
++ * Description: Does early system init of muxing and clocks.
++ * - Called at time when only stack is available.
++ **********************************************************/
++
++void s_init(void)
++{
++	watchdog_init();
++#ifdef CONFIG_3430_AS_3410
++	/* setup the scalability control register for
++	 * 3430 to work in 3410 mode
++	 */
++	__raw_writel(0x5ABF, CONTROL_SCALABLE_OMAP_OCP);
++#endif
++	try_unlock_memory();
++	set_muxconf_regs();
++	delay(100);
++	prcm_init();
++	per_clocks_enable();
++
++	/* enable the DDRPHY clk */
++	sr32((OMAP34XX_CTRL_BASE + 0x588), 15, 15, 0x1);
++	/* enable the EMIF4 clk */
++	sr32((OMAP34XX_CTRL_BASE + 0x588), 14, 14, 0x1);
++	/* Enable the peripheral clocks */
++	sr32((OMAP34XX_CTRL_BASE + 0x59C), 0, 4, 0xF);
++	sr32((OMAP34XX_CTRL_BASE + 0x59C), 8, 10, 0x7);
++
++	/* bring cpgmac out of reset */
++	sr32((OMAP34XX_CTRL_BASE + 0x598), 1, 1, 0x1);
++
++	/* Configure the EMIF4 for our DDR */
++	config_emif4_ddr();
++}
++
++/*******************************************************
++ * Routine: misc_init_r
++ * Description: Init ethernet (done here so udelay works)
++ ********************************************************/
++int misc_init_r(void)
++{
++	return 0;
++}
++
++/******************************************************
++ * Routine: wait_for_command_complete
++ * Description: Wait for posting to finish on watchdog
++ ******************************************************/
++void wait_for_command_complete(unsigned int wd_base)
++{
++	int pending = 1;
++	do {
++		pending = __raw_readl(wd_base + WWPS);
++	} while (pending);
++}
++
++/****************************************
++ * Routine: watchdog_init
++ * Description: Shut down watch dogs
++ *****************************************/
++void watchdog_init(void)
++{
++	/* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
++	 * either taken care of by ROM (HS/EMU) or not accessible (GP).
++	 * We need to take care of WD2-MPU or take a PRCM reset.  WD3
++	 * should not be running and does not generate a PRCM reset.
++	 */
++	sr32(CM_FCLKEN_WKUP, 5, 1, 1);
++	sr32(CM_ICLKEN_WKUP, 5, 1, 1);
++	wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */
++
++	__raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
++	wait_for_command_complete(WD2_BASE);
++	__raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
++}
++
++/**********************************************
++ * Routine: dram_init
++ * Description: sets uboots idea of sdram size
++ **********************************************/
++int dram_init(void)
++{
++	return 0;
++}
++
++/*****************************************************************
++ * Routine: peripheral_enable
++ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
++ ******************************************************************/
++void per_clocks_enable(void)
++{
++	/* Enable GP2 timer. */
++	sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */
++	sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */
++	sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */
++
++#ifdef CFG_NS16550
++	/* Enable UART1 clocks */
++	sr32(CM_FCLKEN1_CORE, 13, 1, 0x1);
++	sr32(CM_ICLKEN1_CORE, 13, 1, 0x1);
++
++	/* Enable UART2 clocks */
++	sr32(CM_FCLKEN1_CORE, 14, 1, 0x1);
++	sr32(CM_ICLKEN1_CORE, 14, 1, 0x1);
++
++	/* Enable UART2 clocks */
++	sr32(CM_FCLKEN_PER, 11, 1, 0x1);
++	sr32(CM_ICLKEN_PER, 11, 1, 0x1);
++#endif
++	/* Enable MMC1 clocks */
++	sr32(CM_FCLKEN1_CORE, 24, 1, 0x1);
++	sr32(CM_ICLKEN1_CORE, 24, 1, 0x1);
++
++	/* Enable MMC2 clocks */
++	sr32(CM_FCLKEN1_CORE, 25, 1, 0x1);
++	sr32(CM_ICLKEN1_CORE, 25, 1, 0x1);
++
++	delay(1000);
++}
++
++/* Set MUX for UART, GPMC, SDRC, GPIO */
++
++#define 	MUX_VAL(OFFSET, VALUE)\
++		__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
++
++#define		CP(x)	(CONTROL_PADCONF_##x)
++/*
++ * IEN  - Input Enable
++ * IDIS - Input Disable
++ * PTD  - Pull type Down
++ * PTU  - Pull type Up
++ * DIS  - Pull type selection is inactive
++ * EN   - Pull type selection is active
++ * M0   - Mode 0
++ * The commented string gives the final mux configuration for that pin
++ */
++#define MUX_DEFAULT()\
++	MUX_VAL(CP(SDRC_D0),        (IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
++	MUX_VAL(CP(SDRC_D1),        (IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
++	MUX_VAL(CP(SDRC_D2),        (IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
++	MUX_VAL(CP(SDRC_D3),        (IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
++	MUX_VAL(CP(SDRC_D4),        (IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
++	MUX_VAL(CP(SDRC_D5),        (IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
++	MUX_VAL(CP(SDRC_D6),        (IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
++	MUX_VAL(CP(SDRC_D7),        (IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
++	MUX_VAL(CP(SDRC_D8),        (IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
++	MUX_VAL(CP(SDRC_D9),        (IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
++	MUX_VAL(CP(SDRC_D10),       (IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
++	MUX_VAL(CP(SDRC_D11),       (IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
++	MUX_VAL(CP(SDRC_D12),       (IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
++	MUX_VAL(CP(SDRC_D13),       (IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
++	MUX_VAL(CP(SDRC_D14),       (IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
++	MUX_VAL(CP(SDRC_D15),       (IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
++	MUX_VAL(CP(SDRC_D16),       (IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
++	MUX_VAL(CP(SDRC_D17),       (IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
++	MUX_VAL(CP(SDRC_D18),       (IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
++	MUX_VAL(CP(SDRC_D19),       (IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
++	MUX_VAL(CP(SDRC_D20),       (IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
++	MUX_VAL(CP(SDRC_D21),       (IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
++	MUX_VAL(CP(SDRC_D22),       (IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
++	MUX_VAL(CP(SDRC_D23),       (IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
++	MUX_VAL(CP(SDRC_D24),       (IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
++	MUX_VAL(CP(SDRC_D25),       (IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
++	MUX_VAL(CP(SDRC_D26),       (IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
++	MUX_VAL(CP(SDRC_D27),       (IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
++	MUX_VAL(CP(SDRC_D28),       (IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
++	MUX_VAL(CP(SDRC_D29),       (IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
++	MUX_VAL(CP(SDRC_D30),       (IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
++	MUX_VAL(CP(SDRC_D31),       (IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
++	MUX_VAL(CP(SDRC_CLK),       (IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
++	MUX_VAL(CP(SDRC_DQS0),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
++	MUX_VAL(CP(SDRC_DQS1),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
++	MUX_VAL(CP(SDRC_DQS2),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
++	MUX_VAL(CP(SDRC_DQS3),      (IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
++	MUX_VAL(CP(sdrc_cke0),      (M0)) /*SDRC_CKE0*/\
++	MUX_VAL(CP(sdrc_cke1),      (M0)) /*SDRC_CKE1*/\
++	MUX_VAL(CP(GPMC_A1),        (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
++	MUX_VAL(CP(GPMC_A2),        (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
++	MUX_VAL(CP(GPMC_A3),        (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
++	MUX_VAL(CP(GPMC_A4),        (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
++	MUX_VAL(CP(GPMC_A5),        (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
++	MUX_VAL(CP(GPMC_A6),        (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
++	MUX_VAL(CP(GPMC_A7),        (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
++	MUX_VAL(CP(GPMC_A8),        (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
++	MUX_VAL(CP(GPMC_A9),        (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
++	MUX_VAL(CP(GPMC_A10),       (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
++	MUX_VAL(CP(GPMC_D0),        (IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
++	MUX_VAL(CP(GPMC_D1),        (IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
++	MUX_VAL(CP(GPMC_D2),        (IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
++	MUX_VAL(CP(GPMC_D3),        (IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
++	MUX_VAL(CP(GPMC_D4),        (IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
++	MUX_VAL(CP(GPMC_D5),        (IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
++	MUX_VAL(CP(GPMC_D6),        (IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
++	MUX_VAL(CP(GPMC_D7),        (IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
++	MUX_VAL(CP(GPMC_D8),        (IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
++	MUX_VAL(CP(GPMC_D9),        (IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
++	MUX_VAL(CP(GPMC_D10),       (IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
++	MUX_VAL(CP(GPMC_D11),       (IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
++	MUX_VAL(CP(GPMC_D12),       (IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
++	MUX_VAL(CP(GPMC_D13),       (IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
++	MUX_VAL(CP(GPMC_D14),       (IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
++	MUX_VAL(CP(GPMC_D15),       (IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
++	MUX_VAL(CP(GPMC_nCS0),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
++	MUX_VAL(CP(GPMC_nCS1),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
++	MUX_VAL(CP(GPMC_nCS2),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
++	MUX_VAL(CP(GPMC_nCS3),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
++	MUX_VAL(CP(GPMC_nCS4),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
++	MUX_VAL(CP(GPMC_nCS5),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS5*/\
++	MUX_VAL(CP(GPMC_nCS6),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS6*/\
++	MUX_VAL(CP(GPMC_nCS7),      (IDIS | PTU | EN  | M0)) /*GPMC_nCS7*/\
++	MUX_VAL(CP(GPMC_CLK),       (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
++	MUX_VAL(CP(GPMC_nADV_ALE),  (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
++	MUX_VAL(CP(GPMC_nOE),       (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
++	MUX_VAL(CP(GPMC_nWE),       (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
++	MUX_VAL(CP(GPMC_nBE0_CLE),  (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
++	MUX_VAL(CP(GPMC_nBE1),      (IDIS | PTD | DIS | M4)) /*GPIO_61*/\
++	MUX_VAL(CP(GPMC_nWP),       (IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
++	MUX_VAL(CP(GPMC_WAIT0),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
++	MUX_VAL(CP(GPMC_WAIT1),     (IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
++	MUX_VAL(CP(GPMC_WAIT2),     (IEN  | PTU | EN  | M4)) /*GPIO_64*/\
++	MUX_VAL(CP(GPMC_WAIT3),     (IEN  | PTU | EN  | M4)) /*GPIO_65*/\
++	MUX_VAL(CP(DSS_DATA18),     (IEN  | PTD | DIS | M4)) /*GPIO_88*/\
++	MUX_VAL(CP(DSS_DATA19),     (IEN  | PTD | DIS | M4)) /*GPIO_89*/\
++	MUX_VAL(CP(DSS_DATA20),     (IEN  | PTD | DIS | M4)) /*GPIO_90*/\
++	MUX_VAL(CP(DSS_DATA21),     (IEN  | PTD | DIS | M4)) /*GPIO_91*/\
++	MUX_VAL(CP(CAM_WEN),        (IEN  | PTD | DIS | M4)) /*GPIO_167*/\
++	MUX_VAL(CP(UART3_TX_IRTX),       (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
++	MUX_VAL(CP(UART3_RTS_SD),      (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
++	MUX_VAL(CP(UART3_CTS_RCTX),      (IEN | PTU | DIS | M0)) /*UART1_CTS*/\
++	MUX_VAL(CP(UART3_RX_IRRX),       (IEN | PTD | DIS | M0)) /*UART1_RX*/\
++	/*Expansion card  */\
++	MUX_VAL(CP(MMC1_CLK),          (IEN  | PTU | EN  | M0)) /*MMC1_CLK*/\
++	MUX_VAL(CP(MMC1_CMD),          (IEN  | PTU | DIS | M0)) /*MMC1_CMD*/\
++	MUX_VAL(CP(MMC1_DAT0),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT0*/\
++	MUX_VAL(CP(MMC1_DAT1),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT1*/\
++	MUX_VAL(CP(MMC1_DAT2),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT2*/\
++	MUX_VAL(CP(MMC1_DAT3),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT3*/\
++	MUX_VAL(CP(MMC1_DAT4),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT4*/\
++	MUX_VAL(CP(MMC1_DAT5),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT5*/\
++	MUX_VAL(CP(MMC1_DAT6),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT6*/\
++	MUX_VAL(CP(MMC1_DAT7),         (IEN  | PTU | DIS | M0)) /*MMC1_DAT7*/\
++	MUX_VAL(CP(McBSP1_DX),      (IEN  | PTD | DIS | M4)) /*GPIO_158*/\
++	MUX_VAL(CP(SYS_32K),        (IEN  | PTD | DIS | M0)) /*SYS_32K*/\
++	MUX_VAL(CP(SYS_BOOT0),      (IEN  | PTD | DIS | M4)) /*GPIO_2 */\
++	MUX_VAL(CP(SYS_BOOT1),      (IEN  | PTD | DIS | M4)) /*GPIO_3 */\
++	MUX_VAL(CP(SYS_BOOT2),      (IEN  | PTD | DIS | M4)) /*GPIO_4 */\
++	MUX_VAL(CP(SYS_BOOT3),      (IEN  | PTD | DIS | M4)) /*GPIO_5 */\
++	MUX_VAL(CP(SYS_BOOT4),      (IEN  | PTD | DIS | M4)) /*GPIO_6 */\
++	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /*GPIO_7 */\
++	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /*GPIO_8 */\
++	MUX_VAL(CP(SYS_CLKOUT2),    (IEN  | PTU | EN  | M4)) /*GPIO_186*/\
++	MUX_VAL(CP(JTAG_nTRST),     (IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
++	MUX_VAL(CP(JTAG_TCK),       (IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
++	MUX_VAL(CP(JTAG_TMS),       (IEN  | PTD | DIS | M0)) /*JTAG_TMS*/\
++	MUX_VAL(CP(JTAG_TDI),       (IEN  | PTD | DIS | M0)) /*JTAG_TDI*/\
++	MUX_VAL(CP(JTAG_EMU0),      (IEN  | PTD | DIS | M0)) /*JTAG_EMU0*/\
++	MUX_VAL(CP(JTAG_EMU1),      (IEN  | PTD | DIS | M0)) /*JTAG_EMU1*/\
++	MUX_VAL(CP(ETK_CLK),        (IEN  | PTD | DIS | M4)) /*GPIO_12*/\
++	MUX_VAL(CP(ETK_CTL),        (IEN  | PTD | DIS | M4)) /*GPIO_13*/\
++	MUX_VAL(CP(ETK_D0),        (IEN  | PTD | DIS | M4)) /*GPIO_14*/\
++	MUX_VAL(CP(ETK_D1),        (IEN  | PTD | DIS | M4)) /*GPIO_15*/\
++	MUX_VAL(CP(ETK_D2),        (IEN  | PTD | DIS | M4)) /*GPIO_16*/\
++	MUX_VAL(CP(ETK_D10),        (IEN  | PTD | DIS | M4)) /*GPIO_24*/\
++	MUX_VAL(CP(ETK_D11),        (IEN  | PTD | DIS | M4)) /*GPIO_25*/\
++	MUX_VAL(CP(ETK_D12),        (IEN  | PTD | DIS | M4)) /*GPIO_26*/\
++	MUX_VAL(CP(ETK_D13),        (IEN  | PTD | DIS | M4)) /*GPIO_27*/\
++	MUX_VAL(CP(ETK_D14),        (IEN  | PTD | DIS | M4)) /*GPIO_28*/\
++	MUX_VAL(CP(ETK_D15),        (IEN  | PTD | DIS | M4)) /*GPIO_29*/
++
++/**********************************************************
++ * Routine: set_muxconf_regs
++ * Description: Setting up the configuration Mux registers
++ *              specific to the hardware. Many pins need
++ *              to be moved from protect to primary mode.
++ *********************************************************/
++void set_muxconf_regs(void)
++{
++	MUX_DEFAULT();
++}
++
++/**********************************************************
++ * Routine: nand+_init
++ * Description: Set up nand for nand and jffs2 commands
++ *********************************************************/
++
++int nand_init(void)
++{
++	/* global settings */
++	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
++	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
++	__raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */
++
++	/* Set the GPMC Vals . For NAND boot on 3430SDP, NAND is mapped at CS0
++	 * , NOR at CS1 and MPDB at CS3. And oneNAND boot, we map oneNAND at
++	 * CS0. We configure only GPMC CS0 with required values. Configiring
++	 * other devices at other CS in done in u-boot anyway. So we don't
++	 * have to bother doing it here.
++	 */
++
++	__raw_writel(0, GPMC_CONFIG7 + GPMC_CONFIG_CS0);
++	delay(1000);
++
++	if ((get_mem_type() == GPMC_NAND) || (get_mem_type() == MMC_NAND)) {
++		__raw_writel(M_NAND_GPMC_CONFIG1,
++				GPMC_CONFIG1 + GPMC_CONFIG_CS0);
++		__raw_writel(M_NAND_GPMC_CONFIG2,
++				GPMC_CONFIG2 + GPMC_CONFIG_CS0);
++		__raw_writel(M_NAND_GPMC_CONFIG3,
++				GPMC_CONFIG3 + GPMC_CONFIG_CS0);
++		__raw_writel(M_NAND_GPMC_CONFIG4,
++				GPMC_CONFIG4 + GPMC_CONFIG_CS0);
++		__raw_writel(M_NAND_GPMC_CONFIG5,
++				GPMC_CONFIG5 + GPMC_CONFIG_CS0);
++		__raw_writel(M_NAND_GPMC_CONFIG6,
++				GPMC_CONFIG6 + GPMC_CONFIG_CS0);
++
++		/* Enable the GPMC Mapping */
++		__raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) |
++					((NAND_BASE_ADR>>24) & 0x3F) | (1<<6)),
++				(GPMC_CONFIG7 + GPMC_CONFIG_CS0));
++		delay(2000);
++
++		if (nand_chip()) {
++#ifdef CFG_PRINTF
++			printf("Unsupported Chip!\n");
++#endif
++			return 1;
++		}
++	}
++
++	if ((get_mem_type() == GPMC_ONENAND) ||
++			(get_mem_type() == MMC_ONENAND)) {
++		__raw_writel(ONENAND_GPMC_CONFIG1,
++				GPMC_CONFIG1 + GPMC_CONFIG_CS0);
++		__raw_writel(ONENAND_GPMC_CONFIG2,
++				GPMC_CONFIG2 + GPMC_CONFIG_CS0);
++		__raw_writel(ONENAND_GPMC_CONFIG3,
++				GPMC_CONFIG3 + GPMC_CONFIG_CS0);
++		__raw_writel(ONENAND_GPMC_CONFIG4,
++				GPMC_CONFIG4 + GPMC_CONFIG_CS0);
++		__raw_writel(ONENAND_GPMC_CONFIG5,
++				GPMC_CONFIG5 + GPMC_CONFIG_CS0);
++		__raw_writel(ONENAND_GPMC_CONFIG6,
++				GPMC_CONFIG6 + GPMC_CONFIG_CS0);
++
++		/* Enable the GPMC Mapping */
++		__raw_writel((((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) |
++					((ONENAND_BASE>>24) & 0x3F) | (1<<6)),
++				(GPMC_CONFIG7 + GPMC_CONFIG_CS0));
++		delay(2000);
++
++		if (onenand_chip()) {
++#ifdef CFG_PRINTF
++			printf("OneNAND Unsupported !\n");
++#endif
++			return 1;
++		}
++	}
++	return 0;
++}
++
++
++typedef int (mmc_boot_addr) (void);
++int mmc_boot(unsigned char *buf)
++{
++	long size = 0;
++#ifdef CFG_CMD_FAT
++	block_dev_desc_t *dev_desc = NULL;
++	unsigned char ret = 0;
++	printf("Starting X-loader on MMC \n");
++
++	ret = mmc_init(1);
++	if (ret == 0) {
++		printf("\n MMC init failed \n");
++		return 0;
++	}
++
++	dev_desc = mmc_get_dev(0);
++	fat_register_device(dev_desc, 1);
++	size = file_fat_read("u-boot.bin", buf, 0);
++	if (size == -1)
++		return 0;
++
++	printf("\n%ld Bytes Read from MMC \n", size);
++
++	printf("Starting OS Bootloader from MMC...\n");
++#endif
++	return size;
++}
++
++/* optionally do something like blinking LED */
++void board_hang(void)
++{
++	while (0)
++		;
++}
+diff --git a/board/am3517crane/am3517crane.h b/board/am3517crane/am3517crane.h
+new file mode 100644
+index 0000000..400b774
+--- /dev/null
++++ b/board/am3517crane/am3517crane.h
+@@ -0,0 +1,103 @@
++/*
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * Header file for board/am3517crane/am3517crane.c
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#define MAX_SIL_INDEX	3
++
++/* Definitions for EMIF4 configuration values */
++#define	EMIF4_TIM1_T_RP		0x2
++#define	EMIF4_TIM1_T_RCD	0x2
++#define	EMIF4_TIM1_T_WR		0x2
++#define	EMIF4_TIM1_T_RAS	0x7
++#define	EMIF4_TIM1_T_RC		0x9
++#define	EMIF4_TIM1_T_RRD	0x1
++#define	EMIF4_TIM1_T_WTR	0x1
++
++#define	EMIF4_TIM2_T_XP		0x1
++#define	EMIF4_TIM2_T_ODT	0x2
++#define	EMIF4_TIM2_T_XSNR	0xE
++#define	EMIF4_TIM2_T_XSRD	0xC7
++#define	EMIF4_TIM2_T_RTP	0x1
++#define	EMIF4_TIM2_T_CKE	0x2
++
++#define	EMIF4_TIM3_T_TDQSCKMAX	0x0
++#define	EMIF4_TIM3_T_RFC	0x15
++#define	EMIF4_TIM3_T_RAS_MAX	0x7
++
++#define	EMIF4_PWR_IDLE		0x2
++#define	EMIF4_PWR_DPD_EN	0x0
++#define	EMIF4_PWR_PM_EN		0x0
++#define	EMIF4_PWR_PM_TIM	0x0
++
++#define	EMIF4_INITREF_DIS	0x0
++#define	EMIF4_PASR		0x0
++#define	EMIF4_REFRESH_RATE	0x50F
++
++/*
++ * SDRAM Config register
++ */
++#define	EMIF4_CFG_SDRAM_TYP	0x2
++#define	EMIF4_CFG_IBANK_POS	0x0
++#define	EMIF4_CFG_DDR_TERM	0x0
++#define	EMIF4_CFG_DDR2_DDQS	0x1
++#define	EMIF4_CFG_DYN_ODT	0x0
++#define	EMIF4_CFG_DDR_DIS_DLL	0x0
++#define	EMIF4_CFG_SDR_DRV	0x0
++#define	EMIF4_CFG_CWL		0x0
++#define	EMIF4_CFG_NARROW_MD	0x0
++#define	EMIF4_CFG_CL		0x6
++#define	EMIF4_CFG_ROWSIZE	0x0
++#define	EMIF4_CFG_IBANK		0x3
++#define	EMIF4_CFG_EBANK		0x0
++#define	EMIF4_CFG_PGSIZE	0x2
++
++/*
++ * EMIF4 PHY Control 1 register configuration
++ */
++#define EMIF4_DDR1_RD_LAT	0x6
++#define	EMIF4_DDR1_PWRDN_DIS	0x0
++#define EMIF4_DDR1_STRBEN_EXT	0x0
++#define EMIF4_DDR1_DLL_MODE	0x0
++#define EMIF4_DDR1_VTP_DYN	0x0
++#define EMIF4_DDR1_LB_CK_SEL	0x0
++
++/*
++ * EMIF4 PHY Control 2 register configuration
++ */
++#define EMIF4_DDR2_TX_DATA_ALIGN	0x0
++#define EMIF4_DDR2_RX_DLL_BYPASS	0x0
++
++/* Following functions are exported from lowlevel_init.S */
++extern struct dpll_param *get_mpu_dpll_param(void);
++extern struct dpll_param *get_core_dpll_param(void);
++extern struct dpll_param *get_per_dpll_param(void);
++
++extern int mmc_init(int verbose);
++extern block_dev_desc_t *mmc_get_dev(int dev);
++
++#define __raw_readl(a)    (*(volatile unsigned int *)(a))
++#define __raw_writel(v, a) (*(volatile unsigned int *)(a) = (v))
++#define __raw_readw(a)    (*(volatile unsigned short *)(a))
++#define __raw_writew(v, a) (*(volatile unsigned short *)(a) = (v))
++
+diff --git a/board/am3517crane/config.mk b/board/am3517crane/config.mk
+new file mode 100644
+index 0000000..bc696de
+--- /dev/null
++++ b/board/am3517crane/config.mk
+@@ -0,0 +1,20 @@
++#
++# (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++# Umesh Krishnan <umeshk@mistralsolutions.com>
++#
++# Craneboard uses AM3517 (ARM-CortexA8) cpu
++# see http://www.ti.com/ for more information
++#
++# Am3517 has 1 bank of 128MB Discrete SDRAM on CS0
++# Physical Address:
++# 8000'0000 (bank0)
++#
++# For use if you want X-Loader to relocate from SRAM to DDR
++#TEXT_BASE = 0x80e80000
++#
++# For XIP in 64K of SRAM or debug (GP device has it all availabe)
++# SRAM 40200000-4020FFFF base
++# initial stack at 0x4020fffc used in s_init (below xloader).
++# The run time stack is (above xloader, 2k below)
++# If any globals exist there needs to be room for them also
++TEXT_BASE = 0x40208800
+diff --git a/board/am3517crane/platform.S b/board/am3517crane/platform.S
+new file mode 100644
+index 0000000..f725bc5
+--- /dev/null
++++ b/board/am3517crane/platform.S
+@@ -0,0 +1,436 @@
++/*
++ * Board specific setup info
++ *
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * This file is copied from board/am3517evm/platform.S
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <config.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/mem.h>
++#include <asm/arch/clocks.h>
++
++_TEXT_BASE:
++	.word	TEXT_BASE	/* sdram load addr from config.mk */
++
++#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT)
++/**************************************************************************
++ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
++ * R1 = SRAM destination address.
++ *************************************************************************/
++.global cpy_clk_code
++ cpy_clk_code:
++        /* Copy DPLL code into SRAM */
++        adr     r0, go_to_speed         /* get addr of clock setting code */
++        mov     r2, #384                /* r2 size to copy (div by 32 bytes) */
++        mov     r1, r1                  /* r1 <- dest address (passed in) */
++        add     r2, r2, r0              /* r2 <- source end address */
++next2:
++        ldmia   r0!, {r3-r10}           /* copy from source address [r0]    */
++        stmia   r1!, {r3-r10}           /* copy to   target address [r1]    */
++        cmp     r0, r2                  /* until source end address [r2]    */
++        bne     next2
++	mov	pc, lr                  /* back to caller */
++
++/* ****************************************************************************
++ * NOTE: 3430 X-loader currently does not use this code.
++*   It could be removed its is kept for compatabily with u-boot.
++ *
++ *  go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
++ *               -executed from SRAM.
++ *  R0 = CM_CLKEN_PLL-bypass value
++ *  R1 = CM_CLKSEL1_PLL-m, n, and divider values
++ *  R2 = CM_CLKSEL_CORE-divider values
++ *  R3 = CM_IDLEST_CKGEN - addr dpll lock wait
++ *
++ *  Note: If core unlocks/relocks and SDRAM is running fast already it gets
++ *        confused.  A reset of the controller gets it back.  Taking away its
++ *        L3 when its not in self refresh seems bad for it.  Normally, this code
++ *        runs from flash before SDR is init so that should be ok.
++ ******************************************************************************/
++.global go_to_speed
++ go_to_speed:
++        stmfd sp!, {r4-r6}
++
++        /* move into fast relock bypass */
++        ldr     r4, pll_ctl_add
++        str     r0, [r4]
++wait1:
++        ldr     r5, [r3]       /* get status */
++        and     r5, r5, #0x1   /* isolate core status */
++        cmp     r5, #0x1       /* still locked? */
++        beq     wait1          /* if lock, loop */
++
++	/* set new dpll dividers _after_ in bypass */
++	ldr     r5, pll_div_add1
++        str     r1, [r5]          /* set m, n, m2 */
++        ldr     r5, pll_div_add2
++        str     r2, [r5]          /* set l3/l4/.. dividers*/
++        ldr     r5, pll_div_add3  /* wkup */
++        ldr     r2, pll_div_val3  /* rsm val */
++        str     r2, [r5]
++        ldr     r5, pll_div_add4  /* gfx */
++        ldr     r2, pll_div_val4
++        str     r2, [r5]
++        ldr     r5, pll_div_add5  /* emu */
++        ldr     r2, pll_div_val5
++        str     r2, [r5]
++
++        /* now prepare GPMC (flash) for new dpll speed */
++	/* flash needs to be stable when we jump back to it */
++        ldr     r5, flash_cfg3_addr
++        ldr     r2, flash_cfg3_val
++        str     r2, [r5]
++        ldr     r5, flash_cfg4_addr
++        ldr     r2, flash_cfg4_val
++        str     r2, [r5]
++        ldr     r5, flash_cfg5_addr
++        ldr     r2, flash_cfg5_val
++        str     r2, [r5]
++        ldr     r5, flash_cfg1_addr
++        ldr     r2, [r5]
++        orr     r2, r2, #0x3     /* up gpmc divider */
++        str     r2, [r5]
++
++        /* lock DPLL3 and wait a bit */
++        orr     r0, r0, #0x7   /* set up for lock mode */
++        str     r0, [r4]       /* lock */
++        nop                    /* ARM slow at this point working at sys_clk */
++        nop
++        nop
++        nop
++wait2:
++        ldr     r5, [r3]       /* get status */
++        and     r5, r5, #0x1   /* isolate core status */
++        cmp     r5, #0x1       /* still locked? */
++        bne     wait2          /* if lock, loop */
++        nop
++        nop
++        nop
++        nop
++        ldmfd sp!, {r4-r6}
++        mov     pc, lr           /* back to caller, locked */
++
++_go_to_speed: .word go_to_speed
++
++/* these constants need to be close for PIC code */
++/* The Nor has to be in the Flash Base CS0 for this condition to happen */
++flash_cfg1_addr:
++    .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
++flash_cfg3_addr:
++    .word  (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
++flash_cfg3_val:
++    .word  STNOR_GPMC_CONFIG3
++flash_cfg4_addr:
++    .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
++flash_cfg4_val:
++    .word  STNOR_GPMC_CONFIG4
++flash_cfg5_val:
++    .word  STNOR_GPMC_CONFIG5
++flash_cfg5_addr:
++    .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
++pll_ctl_add:
++    .word CM_CLKEN_PLL
++pll_div_add1:
++    .word CM_CLKSEL1_PLL
++pll_div_add2:
++    .word CM_CLKSEL_CORE
++pll_div_add3:
++    .word CM_CLKSEL_WKUP
++pll_div_val3:
++    .word (WKUP_RSM << 1)
++pll_div_add4:
++    .word CM_CLKSEL_GFX
++pll_div_val4:
++    .word (GFX_DIV << 0)
++pll_div_add5:
++    .word CM_CLKSEL1_EMU
++pll_div_val5:
++    .word CLSEL1_EMU_VAL
++
++#endif
++
++.globl lowlevel_init
++lowlevel_init:
++	ldr	sp,	SRAM_STACK
++        str     ip,	[sp]    /* stash old link register */
++	mov	ip,	lr	/* save link reg across call */
++        bl      s_init          /* go setup pll,mux,memory */
++        ldr     ip,	[sp]    /* restore save ip */
++	mov	lr,	ip	/* restore link reg */
++
++	/* back to arch calling code */
++	mov	pc,	lr
++
++	/* the literal pools origin */
++	.ltorg
++
++REG_CONTROL_STATUS:
++	.word CONTROL_STATUS
++SRAM_STACK:
++	.word LOW_LEVEL_SRAM_STACK
++
++
++/* DPLL(1-4) PARAM TABLES */
++/* Each of the tables has M, N, FREQSEL, M2 values defined for nominal
++ * OPP (1.2V). The fields are defined according to dpll_param struct(clock.c).
++ * The values are defined for all possible sysclk and for ES1 and ES2.
++ */
++
++mpu_dpll_param:
++/* 12MHz */
++/* ES1 */
++.word 0x0FE
++.word 0x07
++.word 0x05
++.word 0x01
++/* ES2 */
++.word 0x0FA
++.word 0x05
++.word 0x07
++.word 0x01
++
++/* 13MHz */
++/* ES1 */
++.word 0x17D
++.word 0x0C
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x1F4
++.word 0x0C
++.word 0x03
++.word 0x01
++
++/* 19.2MHz */
++/* ES1 */
++.word 0x179
++.word 0x12
++.word 0x04
++.word 0x01
++/* ES2 */
++.word 0x271
++.word 0x17
++.word 0x03
++.word 0x01
++
++/* 26MHz */
++/* ES1 */
++.word 0x17D
++.word 0x19
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x0FA
++.word 0x0C
++.word 0x07
++.word 0x01
++
++/* 38.4MHz */
++/* ES1 */
++.word 0x1FA
++.word 0x32
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x271
++.word 0x2F
++.word 0x03
++.word 0x01
++
++
++.globl get_mpu_dpll_param
++get_mpu_dpll_param:
++	adr r0, mpu_dpll_param
++	mov pc, lr
++
++iva_dpll_param:
++/* 12MHz */
++/* ES1 */
++.word 0x07D
++.word 0x05
++.word 0x07
++.word 0x01
++/* ES2 */
++.word 0x0B4
++.word 0x05
++.word 0x07
++.word 0x01
++
++/* 13MHz */
++/* ES1 */
++.word 0x0FA
++.word 0x0C
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x168
++.word 0x0C
++.word 0x03
++.word 0x01
++
++/* 19.2MHz */
++/* ES1 */
++.word 0x082
++.word 0x09
++.word 0x07
++.word 0x01
++/* ES2 */
++.word 0x0E1
++.word 0x0B
++.word 0x06
++.word 0x01
++
++/* 26MHz */
++/* ES1 */
++.word 0x07D
++.word 0x0C
++.word 0x07
++.word 0x01
++/* ES2 */
++.word 0x0B4
++.word 0x0C
++.word 0x07
++.word 0x01
++
++/* 38.4MHz */
++/* ES1 */
++.word 0x13F
++.word 0x30
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x0E1
++.word 0x17
++.word 0x06
++.word 0x01
++
++
++.globl get_iva_dpll_param
++get_iva_dpll_param:
++	adr r0, iva_dpll_param
++	mov pc, lr
++
++core_dpll_param:
++/* 12MHz */
++/* ES1 */
++.word 0x19F
++.word 0x0E
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x0A6
++.word 0x05
++.word 0x07
++.word 0x01
++
++/* 13MHz */
++/* ES1 */
++.word 0x1B2
++.word 0x10
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x14C
++.word 0x0C
++.word 0x03
++.word 0x01
++
++/* 19.2MHz */
++/* ES1 */
++.word 0x19F
++.word 0x17
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x19F
++.word 0x17
++.word 0x03
++.word 0x01
++
++/* 26MHz */
++/* ES1 */
++.word 0x1B2
++.word 0x21
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x0A6
++.word 0x0C
++.word 0x07
++.word 0x01
++
++/* 38.4MHz */
++/* ES1 */
++.word 0x19F
++.word 0x2F
++.word 0x03
++.word 0x01
++/* ES2 */
++.word 0x19F
++.word 0x2F
++.word 0x03
++.word 0x01
++
++.globl get_core_dpll_param
++get_core_dpll_param:
++	adr r0, core_dpll_param
++	mov pc, lr
++
++/* PER DPLL values are same for both ES1 and ES2 */
++per_dpll_param:
++/* 12MHz */
++.word 0xD8
++.word 0x05
++.word 0x07
++.word 0x09
++
++/* 13MHz */
++.word 0x1B0
++.word 0x0C
++.word 0x03
++.word 0x09
++
++/* 19.2MHz */
++.word 0xE1
++.word 0x09
++.word 0x07
++.word 0x09
++
++/* 26MHz */
++.word 0xD8
++.word 0x0C
++.word 0x07
++.word 0x09
++
++/* 38.4MHz */
++.word 0xE1
++.word 0x13
++.word 0x07
++.word 0x09
++
++.globl get_per_dpll_param
++get_per_dpll_param:
++	adr r0, per_dpll_param
++	mov pc, lr
++
+diff --git a/board/am3517crane/x-load.lds b/board/am3517crane/x-load.lds
+new file mode 100644
+index 0000000..eb2a02a
+--- /dev/null
++++ b/board/am3517crane/x-load.lds
+@@ -0,0 +1,53 @@
++/*
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * This file is copied from board/am3517evm/x-load.lds
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++	. = 0x00000000;
++
++	. = ALIGN(4);
++	.text      :
++	{
++	  cpu/omap3/start.o	(.text)
++	  *(.text)
++	}
++
++	. = ALIGN(4);
++	.rodata : { *(.rodata) }
++
++	. = ALIGN(4);
++	.data : { *(.data) }
++
++	. = ALIGN(4);
++	.got : { *(.got) }
++
++	. = ALIGN(4);
++	__bss_start = .;
++	.bss : { *(.bss) }
++	_end = .;
++}
+diff --git a/common/Makefile b/common/Makefile
+new file mode 100644
+index 0000000..c1381e0
+--- /dev/null
++++ b/common/Makefile
+@@ -0,0 +1,50 @@
++
++#
++# (C) Copyright 2004
++# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB     = libcommon.a
++
++AOBJS   =
++
++COBJS   = cmd_load.o
++
++OBJS    = $(AOBJS) $(COBJS)
++
++CPPFLAGS += -I..
++
++all:    $(LIB) $(AOBJS)
++
++$(LIB): .depend $(OBJS)
++	$(AR) crv $@ $(OBJS)
++
++#########################################################################
++
++.depend:        Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
++	        $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
++
++sinclude .depend
++
++#########################################################################
++
+diff --git a/common/cmd_load.c b/common/cmd_load.c
+new file mode 100644
+index 0000000..dcf89b4
+--- /dev/null
++++ b/common/cmd_load.c
+@@ -0,0 +1,537 @@
++/*
++ * (C) Copyright 2000-2004
++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/*
++ * Serial up- and download support
++ */
++#include <common.h>
++#include "cmd_load.h"
++
++
++/*******************************************************
++ * Routine: delay
++ * Description: spinning delay to use before udelay works
++ ******************************************************/
++static inline void delay(unsigned long loops)
++{
++	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
++			  "bne 1b" : "=r" (loops) : "0"(loops));
++}
++static inline void udelay(unsigned long us)
++{
++	delay(us * 200); /* approximate */
++}
++
++#ifdef CFG_CMD_FAT
++extern void *memcpy(void *dest, const void *src, size_t count);
++#else
++void *memcpy(void *dest, const void *src, size_t count)
++{
++	char *tmp = (char *) dest, *s = (char *) src;
++
++	while (count--)
++		*tmp++ = *s++;
++
++	return dest;
++}
++#endif
++
++/* -------------------------------------------------------------------- */
++
++static void set_kerm_bin_mode(unsigned long *);
++static int k_recv(void);
++static ulong load_serial_bin(ulong offset);
++
++
++char his_eol;        /* character he needs at end of packet */
++int  his_pad_count;  /* number of pad chars he needs */
++char his_pad_char;   /* pad chars he needs */
++char his_quote;      /* quote chars he'll use */
++
++int do_load_serial_bin(ulong offset, int baudrate)
++{
++	ulong addr;
++	int rcode = 0;
++
++	printf("## Ready for binary (kermit) download "
++		"to 0x%08lX at %d bps...\n",
++		offset,
++		baudrate);
++	addr = load_serial_bin(offset);
++	if (addr == ~0) {
++		printf("## Binary (kermit) download aborted\n");
++		rcode = 1;
++	} else {
++		printf("## Start Addr      = 0x%08lX\n", addr);
++	}
++
++	return rcode;
++}
++
++
++static ulong load_serial_bin(ulong offset)
++{
++	int size, i;
++
++	set_kerm_bin_mode((ulong *) offset);
++	size = k_recv();
++
++	/*
++	 * Gather any trailing characters (for instance, the ^D which
++	 * is sent by 'cu' after sending a file), and give the
++	 * box some time (100 * 1 ms)
++	 */
++	for (i = 0; i < 100; ++i) {
++		if (tstc())
++			(void) getc();
++		udelay(1000);
++	}
++
++	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
++
++	return offset;
++}
++
++void send_pad(void)
++{
++	int count = his_pad_count;
++
++	while (count-- > 0)
++		putc(his_pad_char);
++}
++
++/* converts escaped kermit char to binary char */
++char ktrans(char in)
++{
++	if ((in & 0x60) == 0x40)
++		return (char) (in & ~0x40);
++	else if ((in & 0x7f) == 0x3f)
++		return (char) (in | 0x40);
++	else
++		return in;
++}
++
++int chk1(char *buffer)
++{
++	int total = 0;
++
++	while (*buffer)
++		total += *buffer++;
++
++	return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
++}
++
++void s1_sendpacket(char *packet)
++{
++	send_pad();
++	while (*packet)
++		putc(*packet++);
++}
++
++static char a_b[24];
++void send_ack(int n)
++{
++	a_b[0] = START_CHAR;
++	a_b[1] = tochar(3);
++	a_b[2] = tochar(n);
++	a_b[3] = ACK_TYPE;
++	a_b[4] = '\0';
++	a_b[4] = tochar(chk1(&a_b[1]));
++	a_b[5] = his_eol;
++	a_b[6] = '\0';
++	s1_sendpacket(a_b);
++}
++
++void send_nack(int n)
++{
++	a_b[0] = START_CHAR;
++	a_b[1] = tochar(3);
++	a_b[2] = tochar(n);
++	a_b[3] = NACK_TYPE;
++	a_b[4] = '\0';
++	a_b[4] = tochar(chk1(&a_b[1]));
++	a_b[5] = his_eol;
++	a_b[6] = '\0';
++	s1_sendpacket(a_b);
++}
++
++
++/* os_data_* takes an OS Open image and puts it into memory, and
++   puts the boot header in an array named os_data_header
++
++   if image is binary, no header is stored in os_data_header.
++*/
++void (*os_data_init) (void);
++void (*os_data_char) (char new_char);
++static int os_data_state, os_data_state_saved;
++int os_data_count;
++static int os_data_count_saved;
++static char *os_data_addr, *os_data_addr_saved;
++static char *bin_start_address;
++int os_data_header[8];
++static void bin_data_init(void)
++{
++	os_data_state = 0;
++	os_data_count = 0;
++	os_data_addr = bin_start_address;
++}
++static void os_data_save(void)
++{
++	os_data_state_saved = os_data_state;
++	os_data_count_saved = os_data_count;
++	os_data_addr_saved = os_data_addr;
++}
++static void os_data_restore(void)
++{
++	os_data_state = os_data_state_saved;
++	os_data_count = os_data_count_saved;
++	os_data_addr = os_data_addr_saved;
++}
++static void bin_data_char(char new_char)
++{
++	switch (os_data_state) {
++	case 0:					/* data */
++		*os_data_addr++ = new_char;
++		--os_data_count;
++		break;
++	}
++}
++static void set_kerm_bin_mode(unsigned long *addr)
++{
++	bin_start_address = (char *) addr;
++	os_data_init = bin_data_init;
++	os_data_char = bin_data_char;
++}
++
++
++/* k_data_* simply handles the kermit escape translations */
++static int k_data_escape, k_data_escape_saved;
++void k_data_init(void)
++{
++	k_data_escape = 0;
++	os_data_init();
++}
++void k_data_save(void)
++{
++	k_data_escape_saved = k_data_escape;
++	os_data_save();
++}
++void k_data_restore(void)
++{
++	k_data_escape = k_data_escape_saved;
++	os_data_restore();
++}
++void k_data_char(char new_char)
++{
++	if (k_data_escape) {
++		/* last char was escape - translate this character */
++		os_data_char(ktrans(new_char));
++		k_data_escape = 0;
++	} else {
++		if (new_char == his_quote) {
++			/* this char is escape - remember */
++			k_data_escape = 1;
++		} else {
++			/* otherwise send this char as-is */
++			os_data_char(new_char);
++		}
++	}
++}
++
++#define SEND_DATA_SIZE  20
++char send_parms[SEND_DATA_SIZE];
++char *send_ptr;
++
++/* handle_send_packet interprits the protocol info and builds and
++   sends an appropriate ack for what we can do */
++void handle_send_packet(int n)
++{
++	int length = 3;
++	int bytes;
++
++	/* initialize some protocol parameters */
++	his_eol = END_CHAR;		/* default end of line character */
++	his_pad_count = 0;
++	his_pad_char = '\0';
++	his_quote = K_ESCAPE;
++
++	/* ignore last character if it filled the buffer */
++	if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
++		--send_ptr;
++	bytes = send_ptr - send_parms;	/* how many bytes we'll process */
++	do {
++		if (bytes-- <= 0)
++			break;
++		/* handle MAXL - max length */
++		/* ignore what he says - most I'll take (here) is 94 */
++		a_b[++length] = tochar(94);
++		if (bytes-- <= 0)
++			break;
++		/* handle TIME - time you should wait for my packets */
++		/* ignore what he says - don't wait for my
++		 * ack longer than 1 second */
++		a_b[++length] = tochar(1);
++		if (bytes-- <= 0)
++			break;
++		/* handle NPAD - number of pad chars I need */
++		/* remember what he says - I need none */
++		his_pad_count = untochar(send_parms[2]);
++		a_b[++length] = tochar(0);
++		if (bytes-- <= 0)
++			break;
++		/* handle PADC - pad chars I need */
++		/* remember what he says - I need none */
++		his_pad_char = ktrans(send_parms[3]);
++		a_b[++length] = 0x40;	/* He should ignore this */
++		if (bytes-- <= 0)
++			break;
++		/* handle EOL - end of line he needs */
++		/* remember what he says - I need CR */
++		his_eol = untochar(send_parms[4]);
++		a_b[++length] = tochar(END_CHAR);
++		if (bytes-- <= 0)
++			break;
++		/* handle QCTL - quote control char he'll use */
++		/* remember what he says - I'll use '#' */
++		his_quote = send_parms[5];
++		a_b[++length] = '#';
++		if (bytes-- <= 0)
++			break;
++		/* handle QBIN - 8-th bit prefixing */
++		/* ignore what he says - I refuse */
++		a_b[++length] = 'N';
++		if (bytes-- <= 0)
++			break;
++		/* handle CHKT - the clock check type */
++		/* ignore what he says - I do type 1 (for now) */
++		a_b[++length] = '1';
++		if (bytes-- <= 0)
++			break;
++		/* handle REPT - the repeat prefix */
++		/* ignore what he says - I refuse (for now) */
++		a_b[++length] = 'N';
++		if (bytes-- <= 0)
++			break;
++		/* handle CAPAS - the capabilities mask */
++		/* ignore what he says - I only do long packets
++		 * - I don't do windows */
++		a_b[++length] = tochar(2);	/* only long packets */
++		a_b[++length] = tochar(0);	/* no windows */
++		a_b[++length] = tochar(94);	/* large packet msb */
++		a_b[++length] = tochar(94);	/* large packet lsb */
++	} while (0);
++
++	a_b[0] = START_CHAR;
++	a_b[1] = tochar(length);
++	a_b[2] = tochar(n);
++	a_b[3] = ACK_TYPE;
++	a_b[++length] = '\0';
++	a_b[length] = tochar(chk1(&a_b[1]));
++	a_b[++length] = his_eol;
++	a_b[++length] = '\0';
++	s1_sendpacket(a_b);
++}
++
++/* k_recv receives a OS Open image file over kermit line */
++static int k_recv(void)
++{
++	char new_char;
++	char k_state, k_state_saved;
++	int sum;
++	int done;
++	int length;
++	int n, last_n;
++	int z = 0;
++	int len_lo, len_hi;
++
++	/* initialize some protocol parameters */
++	his_eol = END_CHAR;		/* default end of line character */
++	his_pad_count = 0;
++	his_pad_char = '\0';
++	his_quote = K_ESCAPE;
++
++	/* initialize the k_recv and k_data state machine */
++	done = 0;
++	k_state = 0;
++	k_data_init();
++	k_state_saved = k_state;
++	k_data_save();
++	n = 0;				/* just to get rid of a warning */
++	last_n = -1;
++
++	/* expect this "type" sequence (but don't check):
++	   S: send initiate
++	   F: file header
++	   D: data (multiple)
++	   Z: end of file
++	   B: break transmission
++	 */
++
++	/* enter main loop */
++	while (!done) {
++		/* set the send packet pointer to
++		 * begining of send packet parms */
++		send_ptr = send_parms;
++
++		/* With each packet, start summing the bytes starting
++		 * with the length.
++		 * Save the current sequence number.
++		 * Note the type of the packet.
++		 * If a character less than SPACE (0x20) is received - error.
++		 */
++
++#if 0
++		/* OLD CODE, Prior to checking sequence numbers */
++		/* first have all state machines save current states */
++		k_state_saved = k_state;
++		k_data_save();
++#endif
++
++		/* get a packet */
++		/* wait for the starting character or ^C */
++		for (;;) {
++			switch (getc()) {
++			case START_CHAR:	/* start packet */
++				goto START;
++			case ETX_CHAR:		/* ^C waiting for packet */
++				return 0;
++			default:
++				;
++			}
++		}
++START:
++		/* get length of packet */
++		sum = 0;
++		new_char = getc();
++		if ((new_char & 0xE0) == 0)
++			goto packet_error;
++		sum += new_char & 0xff;
++		length = untochar(new_char);
++		/* get sequence number */
++		new_char = getc();
++		if ((new_char & 0xE0) == 0)
++			goto packet_error;
++		sum += new_char & 0xff;
++		n = untochar(new_char);
++		--length;
++
++		/* NEW CODE - check sequence numbers for retried packets */
++		/* Note - this new code assumes that the sequence number is
++		 * correctly received.  Handling an invalid sequence number
++		 * adds another layer of complexity that may not be needed
++		 * - yet!  At this time, I'm hoping that I don't need to
++		 * buffer the incoming data packets and can write the data
++		 * into memory in real time.
++		 */
++		if (n == last_n) {
++			/* same sequence number, restore the previous state */
++			k_state = k_state_saved;
++			k_data_restore();
++		} else {
++			/* new sequence number, checkpoint the download */
++			last_n = n;
++			k_state_saved = k_state;
++			k_data_save();
++		}
++		/* END NEW CODE */
++
++		/* get packet type */
++		new_char = getc();
++		if ((new_char & 0xE0) == 0)
++			goto packet_error;
++		sum += new_char & 0xff;
++		k_state = new_char;
++		--length;
++		/* check for extended length */
++		if (length == -2) {
++			/* (length byte was 0, decremented twice) */
++			/* get the two length bytes */
++			new_char = getc();
++			if ((new_char & 0xE0) == 0)
++				goto packet_error;
++			sum += new_char & 0xff;
++			len_hi = untochar(new_char);
++			new_char = getc();
++			if ((new_char & 0xE0) == 0)
++				goto packet_error;
++			sum += new_char & 0xff;
++			len_lo = untochar(new_char);
++			length = len_hi * 95 + len_lo;
++			/* check header checksum */
++			new_char = getc();
++			if ((new_char & 0xE0) == 0)
++				goto packet_error;
++			if (new_char != tochar((sum + ((sum >> 6) & 0x03))
++						& 0x3f))
++				goto packet_error;
++			sum += new_char & 0xff;
++/* --length; */ /* new length includes only data and block check to come */
++		}
++		/* bring in rest of packet */
++		while (length > 1) {
++			new_char = getc();
++			if ((new_char & 0xE0) == 0)
++				goto packet_error;
++			sum += new_char & 0xff;
++			--length;
++			if (k_state == DATA_TYPE) {
++				/* pass on the data if this is a data packet */
++				k_data_char(new_char);
++			} else if (k_state == SEND_TYPE) {
++				/* save send pack in buffer as is */
++				*send_ptr++ = new_char;
++				/* if too much data, back off the pointer */
++				if (send_ptr >= &send_parms[SEND_DATA_SIZE])
++					--send_ptr;
++			}
++		}
++		/* get and validate checksum character */
++		new_char = getc();
++		if ((new_char & 0xE0) == 0)
++			goto packet_error;
++		if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
++			goto packet_error;
++		/* get END_CHAR */
++		new_char = getc();
++		if (new_char != END_CHAR) {
++packet_error:
++			/* restore state machines */
++			k_state = k_state_saved;
++			k_data_restore();
++			/* send a negative acknowledge packet in */
++			send_nack(n);
++		} else if (k_state == SEND_TYPE) {
++			/* Crack the protocol parms,
++			 * build an appropriate ack packet */
++			handle_send_packet(n);
++		} else {
++			/* send simple acknowledge packet in */
++			send_ack(n);
++			/* quit if end of transmission */
++			if (k_state == BREAK_TYPE)
++				done = 1;
++		}
++		++z;
++	}
++	return (ulong) os_data_addr - (ulong) bin_start_address;
++}
+diff --git a/common/cmd_load.h b/common/cmd_load.h
+new file mode 100644
+index 0000000..f1b6eb7
+--- /dev/null
++++ b/common/cmd_load.h
+@@ -0,0 +1,47 @@
++/*
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd.
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * Header file for common/cmd_load.c
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#define putc serial_putc
++#define tstc serial_tstc
++
++#define XON_CHAR        17
++#define XOFF_CHAR       19
++#define START_CHAR      0x01
++#define ETX_CHAR	0x03
++#define END_CHAR        0x0D
++#define SPACE           0x20
++#define K_ESCAPE        0x23
++#define SEND_TYPE       'S'
++#define DATA_TYPE       'D'
++#define ACK_TYPE        'Y'
++#define NACK_TYPE       'N'
++#define BREAK_TYPE      'B'
++#define tochar(x) ((char) (((x) + SPACE) & 0xff))
++#define untochar(x) ((int) (((x) - SPACE) & 0xff))
++
++extern int os_data_count;
++extern int os_data_header[8];
++
++
+diff --git a/cpu/omap3/mmc.c b/cpu/omap3/mmc.c
+index 365df49..4b19dde 100755
+--- a/cpu/omap3/mmc.c
++++ b/cpu/omap3/mmc.c
+@@ -46,7 +46,8 @@ block_dev_desc_t *mmc_get_dev(int dev)
+
+ unsigned char mmc_board_init(void)
+ {
+-#if defined (CONFIG_OMAP34XX) && !defined (CONFIG_AM3517EVM)
++#if defined(CONFIG_OMAP34XX) && !defined(CONFIG_AM3517EVM) && \
++				!defined(CONFIG_AM3517CRANE)
+ 	unsigned int value = 0;
+
+ 	value = CONTROL_PBIAS_LITE;
+diff --git a/drivers/Makefile b/drivers/Makefile
+index b39d983..d071397 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -44,6 +44,10 @@ ifeq ($(BOARD), am3517evm)
+ OBJS    += k9f1g08r0a.o
+ endif
+
++ifeq ($(BOARD), am3517crane)
++OBJS    += k9f1g08r0a.o
++endif
++
+ ifeq ($(BOARD), omap2420h4)
+ OBJS 	+= k9k1216.o
+ endif
+diff --git a/drivers/k9f1g08r0a.c b/drivers/k9f1g08r0a.c
+index 870690d..80afdd9 100755
+--- a/drivers/k9f1g08r0a.c
++++ b/drivers/k9f1g08r0a.c
+@@ -42,8 +42,7 @@
+  */
+ #define MT29F1G_MFR		0x2c  /* Micron */
+ #define MT29F1G_ID		0xa1  /* x8, 1GiB */
+-#define MT29F2G_ID		0xba	/* x16, 2GiB */
+-#define MT29F4G_ID		0xbc	/* x16, 4GiB */
++#define MT29F2G_ID      0xba  /* x16, 2GiB */
+
+ #define HYNIX4GiB_MFR		0xAD  /* Hynix */
+ #define HYNIX4GiB_ID		0xBC  /* x16, 4GiB */
+@@ -62,7 +61,6 @@
+ #define ECC_SIZE		24
+ #define ECC_STEPS		3
+
+-unsigned int is_ddr_166M;
+ /*******************************************************
+  * Routine: delay
+  * Description: spinning delay to use before udelay works
+@@ -185,30 +183,19 @@ int nand_chip()
+
+ 	NAND_DISABLE_CE();
+
+-	switch (mfr) {
+-		/* Hynix NAND Part */
+-		case HYNIX4GiB_MFR:
+-			is_ddr_166M = 0;
+-			if (is_cpu_family() == CPU_OMAP36XX)
+-				return (id != HYNIX4GiB_ID);
+-			break;
+-		/* Micron NAND Part */
+-		case MT29F1G_MFR:
+-			is_ddr_166M = 1;
+-			if ((is_cpu_family() == CPU_OMAP34XX) ||
+-					(is_cpu_family() == CPU_AM35XX) ||
+-					(is_cpu_family() == CPU_OMAP36XX))
+-				return (!((id == MT29F1G_ID) ||
+-						(id == MT29F2G_ID) ||
+-						(id ==MT29F4G_ID)));
+-			break;
+-		case K9F1G08R0A_MFR:
+-		default:
+-			is_ddr_166M = 1;
+-			break;
++	if (is_cpu_family() == CPU_OMAP36XX) {
++		return (mfr != HYNIX4GiB_MFR || id != HYNIX4GiB_ID);
++	} else {
++		if (get_cpu_rev() == CPU_3430_ES2)
++#if defined (CONFIG_OMAP34XX) || defined (CONFIG_OMAP3EVM)
++			return (mfr != MT29F1G_MFR || !(id == MT29F1G_ID || id == MT29F2G_ID));
++#elif defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++		defined(CONFIG_AM3517CRANE)
++		return (mfr != MT29F1G_MFR && !(id == MT29F1G_ID || id == MT29F2G_ID));
++#endif
++		else
++			return (mfr != K9F1G08R0A_MFR || id != K9F1G08R0A_ID);
+ 	}
+-
+-	return (id != K9F1G08R0A_ID);
+ }
+
+ /* read a block data to buf
+diff --git a/include/asm/arch-omap3/cpu.h b/include/asm/arch-omap3/cpu.h
+index 5035c58..49c745c 100644
+--- a/include/asm/arch-omap3/cpu.h
++++ b/include/asm/arch-omap3/cpu.h
+@@ -24,7 +24,8 @@
+
+ #ifndef _OMAP34XX_CPU_H
+ #define  _OMAP34XX_CPU_H
+-#if defined (CONFIG_AM3517EVM) || defined (CONFIG_AM3517TEB)
++#if defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++	defined(CONFIG_AM3517CRANE)
+ #include <asm/arch/omap3.h>
+ #elif defined (CONFIG_OMAP3430)
+ #include <asm/arch/omap3430.h>
+@@ -66,7 +67,8 @@
+ #define GPMC_CONFIG		(OMAP34XX_GPMC_BASE+0x50)
+ #define GPMC_STATUS		(OMAP34XX_GPMC_BASE+0x54)
+
+-#if defined (CONFIG_OMAP34XX) || defined (CONFIG_AM3517EVM)
++#if defined(CONFIG_OMAP34XX) || defined(CONFIG_AM3517EVM) || \
++	defined(CONFIG_AM3517CRANE)
+ #define GPMC_CONFIG_CS0		(OMAP34XX_GPMC_BASE+0x60)
+ #elif defined (CONFIG_AM3517TEB)
+ #define GPMC_CONFIG_CS0		(OMAP34XX_GPMC_BASE+0xC0)
+diff --git a/include/asm/arch-omap3/mem.h b/include/asm/arch-omap3/mem.h
+index 1982dcf..954d5ee 100644
+--- a/include/asm/arch-omap3/mem.h
++++ b/include/asm/arch-omap3/mem.h
+@@ -376,7 +376,8 @@ typedef enum {
+ # define M_NAND_GPMC_CONFIG5 SMNAND_GPMC_CONFIG5
+ # define M_NAND_GPMC_CONFIG6 SMNAND_GPMC_CONFIG6
+
+-#elif defined (CONFIG_AM3517EVM) || defined (CONFIG_AM3517TEB)
++#elif defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++	defined(CONFIG_AM3517CRANE)
+
+ #ifdef NAND_16BIT
+ # define M_NAND_GPMC_CONFIG1 0x00001800
+@@ -425,7 +426,8 @@ typedef enum {
+ # define M_NAND_GPMC_CONFIG6 SMNAND_GPMC_CONFIG6
+ # define M_NAND_GPMC_CONFIG7 SMNAND_GPMC_CONFIG7
+
+-#elif defined (CONFIG_AM3517EVM) || defined (CONFIG_AM3517TEB)
++#elif defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++	defined(CONFIG_AM3517CRANE)
+
+ #ifdef NAND_16BIT
+ # define M_NAND_GPMC_CONFIG1 0x00001800
+@@ -498,7 +500,8 @@ typedef enum {
+ # define M_NAND_GPMC_CONFIG6 SMNAND_GPMC_CONFIG6
+ # define M_NAND_GPMC_CONFIG7 SMNAND_GPMC_CONFIG7
+
+-#elif defined (CONFIG_AM3517EVM) || defined (CONFIG_AM3517TEB)
++#elif defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++	defined(CONFIG_AM3517CRANE)
+
+ #ifdef NAND_16BIT
+ # define M_NAND_GPMC_CONFIG1 0x00001800
+diff --git a/include/asm/arch-omap3/omap3430.h b/include/asm/arch-omap3/omap3430.h
+index 16cde63..4fd700a 100644
+--- a/include/asm/arch-omap3/omap3430.h
++++ b/include/asm/arch-omap3/omap3430.h
+@@ -130,7 +130,8 @@
+ #define ENHANCED_UI_EE_NAME		"750-2075"
+ #endif
+
+-#if defined (CONFIG_AM3517EVM) || defined (CONFIG_AM3517TEB)
++#if defined(CONFIG_AM3517EVM) || defined(CONFIG_AM3517TEB) || \
++	defined(CONFIG_AM3517CRANE)
+ /* EMIF 4 replaces SDRC in AM3517 for DDR */
+ #define EMIF4_MOD_ID			0x00
+ #define EMIF4_STATUS			0x04
+diff --git a/include/configs/am3517crane.h b/include/configs/am3517crane.h
+new file mode 100644
+index 0000000..76ed2c0
+--- /dev/null
++++ b/include/configs/am3517crane.h
+@@ -0,0 +1,200 @@
++/*
++ * (C) Copyright 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
++ * Umesh Krishnan <umeshk@mistralsolutions.com>
++ *
++ * X-Loader Configuation settings for the CRANE board.
++ *
++ * Derived from include/configs/am3517evm.h
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/* serial printf facility takes about 3.5K */
++#define CFG_PRINTF
++
++/*
++ * High Level Configuration Options
++ */
++#define CONFIG_ARMCORTEXA8	1    /* This is an ARM V7 CPU core */
++#define CONFIG_OMAP		1    /* in a TI OMAP core */
++
++#define CONFIG_AM3517CRANE	1    /* working with CraneBoard */
++
++/* Disabling CONFIG_MMC when serial download config (loadb)is used.
++ * If loadb and MMC support are enabled together, the size of x-loader
++ * (code + data) becomes greater than 32K - the size of SRAM. So don't enable
++ * them together.
++ */
++#if !defined(START_LOADB_DOWNLOAD)
++/* Enable the below macro if MMC boot support is required */
++#define CONFIG_MMC               1
++#endif
++
++#if defined(CONFIG_MMC)
++	#define CFG_CMD_MMC              1
++	#define CFG_CMD_FAT              1
++#endif
++
++#include <asm/arch/cpu.h>        /* get chip and board defs */
++
++/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
++/* #define CFG_UDELAY */
++
++/* Clock Defines */
++#define V_OSCK                   26000000  /* Clock output from T2 */
++
++#if (V_OSCK > 19200000)
++#define V_SCLK                   (V_OSCK >> 1)
++#else
++#define V_SCLK                   V_OSCK
++#endif
++
++/* #define PRCM_CLK_CFG2_266MHZ   1   */ /* VDD2=1.15v - 133MHz DDR */
++#define PRCM_CLK_CFG2_332MHZ     1    /* VDD2=1.15v - 166MHz DDR */
++#define PRCM_PCLK_OPP2           1    /* ARM=381MHz - VDD1=1.20v */
++
++# define NAND_BASE_ADR           NAND_BASE  /* NAND flash */
++# define ONENAND_BASE            ONENAND_MAP  /* OneNand flash */
++
++#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M
++#define ONENAND_ADDR ONENAND_BASE  /* physical address of OneNAND at CS0*/
++
++#ifdef CFG_PRINTF
++
++#define CFG_NS16550
++#define CFG_NS16550_SERIAL
++#define CFG_NS16550_REG_SIZE     (-4)
++#define CFG_NS16550_CLK          (48000000)
++#define CFG_NS16550_COM3         OMAP34XX_UART3
++
++/*
++ * select serial console configuration
++ */
++#define CONFIG_SERIAL3           3    /* UART1 on OMAP3EVM */
++#define CONFIG_CONS_INDEX        3
++
++#define CONFIG_BAUDRATE          115200
++#define CFG_PBSIZE               256
++
++#endif /* CFG_PRINTF */
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LOADADDR             0x80008000
++
++#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
++
++/*-----------------------------------------------------------------------
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE         (128*1024) /* regular stack */
++
++/*-----------------------------------------------------------------------
++ * Board NAND Info.
++ */
++/* Samsung 8-bit 128MB chip large page NAND chip*/
++#define CFG_NAND_K9F1G08R0A
++#define NAND_16BIT
++
++/* NAND is partitioned:
++ * 0x00000000 - 0x0007FFFF  Booting Image
++ * 0x00080000 - 0x0023FFFF  U-Boot Image
++ * 0x00240000 - 0x0027FFFF  U-Boot Env Data (X-loader doesn't care)
++ * 0x00280000 - 0x0077FFFF  Kernel Image
++ * 0x00780000 - 0x08000000  depends on application
++ */
++/* Leaving first 4 blocks for x-load */
++#define NAND_UBOOT_START         0x0080000
++/* Giving a space of 2 blocks = 256KB */
++#define NAND_UBOOT_END           0x0240000
++#define NAND_BLOCK_SIZE          0x20000
++
++#define GPMC_CONFIG              (OMAP34XX_GPMC_BASE+0x50)
++
++#if defined(CONFIG_AM3517CRANE)
++#define GPMC_NAND_COMMAND_0      (OMAP34XX_GPMC_BASE+0x7C)
++#define GPMC_NAND_ADDRESS_0      (OMAP34XX_GPMC_BASE+0x80)
++#define GPMC_NAND_DATA_0         (OMAP34XX_GPMC_BASE+0x84)
++#endif
++
++#ifdef NAND_16BIT
++#define WRITE_NAND_COMMAND(d, adr) \
++	do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d; } while (0)
++#define WRITE_NAND_ADDRESS(d, adr) \
++	do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
++#define WRITE_NAND(d, adr) \
++	do {*(volatile u16 *)GPMC_NAND_DATA_0 = d; } while (0)
++#define READ_NAND(adr) \
++	(*(volatile u16 *)GPMC_NAND_DATA_0)
++#define NAND_WAIT_READY()
++#define NAND_WP_OFF()  \
++	do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
++#define NAND_WP_ON()  \
++	do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
++
++#else /* to support 8-bit NAND devices */
++#define WRITE_NAND_COMMAND(d, adr) \
++	do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d; } while (0)
++#define WRITE_NAND_ADDRESS(d, adr) \
++	do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d; } while (0)
++#define WRITE_NAND(d, adr) \
++	do {*(volatile u8 *)GPMC_NAND_DATA_0 = d; } while (0)
++#define READ_NAND(adr) \
++	(*(volatile u8 *)GPMC_NAND_DATA_0);
++#define NAND_WAIT_READY()
++#define NAND_WP_OFF()  \
++	do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010; } while (0)
++#define NAND_WP_ON()  \
++	do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010; } while (0)
++
++#endif
++
++#define NAND_CTL_CLRALE(adr)
++#define NAND_CTL_SETALE(adr)
++#define NAND_CTL_CLRCLE(adr)
++#define NAND_CTL_SETCLE(adr)
++#define NAND_DISABLE_CE()
++#define NAND_ENABLE_CE()
++
++/*-----------------------------------------------------------------------
++ * Board oneNAND Info.
++ */
++#define CFG_SYNC_BURST_READ	1
++
++/* OneNAND is partitioned:
++ *   0x0000000 - 0x0080000  X-Loader
++ *   0x0080000 - 0x0240000   U-boot Image
++ *   0x0240000 - 0x0280000   U-Boot Env Data (X-loader doesn't care)
++ *   0x0280000 - 0x0780000   Kernel Image
++ *   0x0780000 - 0x8000000   depends on application
++ */
++
++#define ONENAND_START_BLOCK      4
++#define ONENAND_END_BLOCK        18
++#define ONENAND_PAGE_SIZE        2048     /* 2KB */
++#define ONENAND_BLOCK_SIZE       0x20000  /* 128KB */
++
++#endif /* __CONFIG_H */
++
+--
+1.7.0.4
+
diff --git a/recipes/x-load/x-load_git.bb b/recipes/x-load/x-load_git.bb
index 9daaf6c25f..e6df1cde6b 100644
--- a/recipes/x-load/x-load_git.bb
+++ b/recipes/x-load/x-load_git.bb
@@ -9,7 +9,7 @@ SRCREV_beagleboard = "1c9276af4d6a5b7014a7630a1abeddf3b3177563"
 
 PV = "1.42+${PR}+gitr${SRCREV}"
 PV_beagleboard = "1.44+${PR}+gitr${SRCREV}"
-PR ="r17"
+PR ="r18"
 PE = "1"
 
 SRC_URI = "git://gitorious.org/x-load-omap3/mainline.git;branch=master;protocol=git"
@@ -27,6 +27,13 @@ SRC_URI_append_omap3-touchbook = " \
                              "
 
 # TI PSP v1.46_OMAPPSP_03.00.01.06 (Tag is one commit different)
+SRC_URI_am3517-crane = "git://arago-project.org/git/projects/x-load-omap3.git;protocol=git \
+                        file://0001-Added-support-for-AM3517-CraneBoard.patch \
+"
+SRCREV_am3517-crane = "fc6d5be15c703d21aef0ae0b8c02177721f0445f"
+PV_am3517-crane = "1.46+${PR}+gitr${SRCREV}"
+
+# TI PSP v1.46_OMAPPSP_03.00.01.06 (Tag is one commit different)
 SRC_URI_omap3evm = "git://arago-project.org/git/projects/x-load-omap3.git;protocol=git"
 SRCREV_omap3evm = "fc6d5be15c703d21aef0ae0b8c02177721f0445f"
 PV_omap3evm = "1.46+${PR}+gitr${SRCREV}"
author	Anil kumar M <anilm@mistralsolutions.com>	2010-12-20 19:54:31 +0530
committer	Koen Kooi <koen@openembedded.org>	2010-12-20 16:17:58 +0100
commit	db5a2f7791b100834588a0a22e089b057702c677 (patch)
tree	6c09428f43c1f113b282f129e47995381c28914c /recipes/x-load
parent	c5cc3368f3f8f0ddbae4598066ef59d77fbed7be (diff)
download	openembedded-db5a2f7791b100834588a0a22e089b057702c677.tar.gz