| Age | Commit message (Collapse) | Author |
|---|
|
There is no real reason to have these separate files any longer. It does
mean in meta-toolchain type recipes some extra variables are defined but
it also means the common code can be grouped and maintained together
which I believe is more beneficial. We therefore merge the classes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Now populate_sdk_base has the appropriate flags, we can drop these from the individual
classes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're using the python routines now.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The list_installed_packages bash routine is no longer needed here. We've
got a python replacement.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The old code no more needed since the job is done in python now.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
|
|
Write a list of installed packages to a .manifest file next to the
image, so we can find out what went into the image after it has been
constructed without necessarily having to have buildhistory enabled
(although that will provide more detail.) We can make use of this for
example in the testimage class associated code that checks for installed
packages for determining whether or not to run specific tests.
Note: this replaces the previous ipk-specific manifest code with
something that works for ipk, rpm and deb, and instead of a pruned
status file, packages are listed one per line, in the following format:
<packagename> <packagearch> <version>
Tests for all three backends have shown that the performance impact of
this change is negligible (about 1.5s max).
Implements [YOCTO #5410]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* usually it's more important to know how much space will each
package take on target device then size of compressed package
* example for libewebkit0 with 4 different architectures, interesting
that om_gta02 .ipk is bigger but it's smaller when installed
before:
MACHINE DEFAULTTUNE SIZE (.ipk file)
om_gta04 cortexa8t-neon 15996 KiB libewebkit0
qemux86_64 x86-64 16992 KiB libewebkit0
spitz xscale 16148 KiB libewebkit0
om_gta02 arm920t 16260 KiB libewebkit0
after:
MACHINE DEFAULTTUNE SIZE (installed)
om_gta04 cortexa8t-neon 60544 KiB libewebkit0
qemux86_64 x86-64 63720 KiB libewebkit0
spitz xscale 60588 KiB libewebkit0
om_gta02 arm920t 56268 KiB libewebkit0
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes build failures introduced with "classes/buildhistory: implement history
collection for SDK" by moving the functions to files where only the specific image
type which is enabled is inherited. The failures occured when multiple PACKAGE_CLASSES
were enabled.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
SDKs are constructed in a similar manner to images, and the contents can
be influenced by a number of different factors, thus tracking the
contents of produced SDKs when buildhistory is enabled can help detect
the same kinds of issues as with images.
This required adding POPULATE_SDK_POST_HOST_COMMAND and
SDK_POSTPROCESS_COMMAND variables so that data collection functions can
be injected at the appropriate points in the SDK construction process,
as well as moving the list_installed_packages and
rootfs_list_installed_depends functions from the rootfs_{rpm,ipk,deb} to
the package_{rpm,ipk,deb} classes so they can also be called during
do_populate_sdk as well as do_rootfs.
Implements [YOCTO #3964].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order for the postinstall scripts to have access to the recent
improvements when generating the target SDK sysroot, export these
variables in populate_sdk.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
|
|
When building an image recipe, you can now build a companion SDK by
calling the populate_sdk task:
bitbake -c populate_sdk core-image-minimal
Note: there are still issues w/ the SDK not working completely with
multilibs.
A lock is required between rootfs and populate_sdk activities to prevent
configuration file clashes and similar package management problems in ipk
and deb based systems. (RPM already had a lock for a different reason.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
We want to be able to supply attempt only packages in the SDK in order to
support more advanced SDK images that more closely match specific image
recipes.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
postinstalls
Without this, various postinstalls get run with incorrect environments
leading to various failures when building the toolchains.
This adds some duplication and some variables we'd be better off
removing. It does unbreak the SDK ipk code for now though. This needs
revisiting.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
task level)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation commit for adding ipk support in populate_sdk
task.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
Richard Purdie
Laurentiu Palcu
Paul Eggleton
Martin Jansa
Mark Hatle
Lianhao Lu