| Age | Commit message (Collapse) | Author |
|---|
|
The extensible SDK replaces adt-installer so this can be removed now,
all future effort in this direction will be placed onto that.
This includes a layer version change so the autobuilder knows when to
stop building adt-installer.
[YOCTO #6404]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
- Opkg 0.3.0 deprecated --disable-shave & --withopkglibdir options.
- Add -i option to autoreconf since opkg tarball is missing conf.compile.
- Recreate wget_cache.patch
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Changes required:
- Rename opkg-cl to opkg
- Add libarchive dependency
- Drop backport patches
- Drop obsolete directory options
- Add patch to handle empty index files
Based on initial work by Paul Barker.
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
CC: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There is a proper sysroot specified in the meta-environment script now,
which isn't a bad thing. We adjust the sed expression to cope with this.
That means the SDK installations in non-default paths start to work again.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When use default install directory, we can't get the environment setup
script path. The reason is that opkg-cl list incorrect files paths.
This patch sets env_script variable to make us get correct environment
setup script path.
[YOCTO #6443]
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should check the result of updating opkg rather than echo_info.
So we should call check_result function after updating opkg.
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to check YOCTOADT_QEMU variable whether is equal to "y".
So we should use "==" rather than "=".
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous change to adt_installer was incorrect, this reverts it and
fixes the real issue. The real issue is that if a previous installation was
present, it may have been moved and therefore the paths returned by opkg
could be a little odd.
To address this, when we move files to a different location, ensure we
update the *.list files with the revised paths. This means later installs
over the top return consistent values from opkg and the script works
as intended.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to look for the installed file within the sysroot we just installed
so add in the missing prefix. This avoids errors like:
Installing cross canadian packages for qemux86 ...
sed: no input files
[YOCTO #6443]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When the default tune for x86_64 was changed to core2-64, the
environment setup script name did not contain x86 anymore. Hence, the
adt_installer failed for x86_64.
This commit contains a generic fix and is supposed to work with any kind
of machine/tune setting. It's actually extracting the environment script
name using 'opkg files meta-environment-MACHINE'. So, no need to do any
other sort of searches. We know exactly which is the environment setup
script for the specified machine.
[YOCTO #5806]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Other recipes dependencies and even some comments need to be updated
for the removal of unfs-server and the replacement with unfs3. The
unfs3 is a complete drop in replacement providing all the prior
functionality of NFSv2 but also adding NFSv3.
[YOCTO #5639]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Currently, if YOCTOADT_TARGETS does not contain an architecture but the
rootfs/machine settings are uncommented, then the rootfs is installed
and adt will throw an error because is not able to find the toolchain
environment script.
This patch will:
* not allow to install a target rootfs if the toolchain for the
target architecture is not selected;
* uncomment the target rootfs/machine settings for the other
architectures since it's easier for the user to just add a new
architecture in YOCTOADT_TARGETS and have the target rootfs
installed;
[YOCTO #5727]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If one specifies a relative target sysroot path, then he/she must always
be in the same directory in order to be able to compile.
With this patch, adt_installer will automatically convert user
supplied relative paths to absolute.
[YOCTO #4955]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
s/envrionement/environment/
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Old way find -perm +mode is no longer supported in newer
versions of find (Fedora 19). Man page says:
-perm +mode
This is no longer supported (and has been deprecated since
2005). Use -perm /mode instead.
[YOCTO #4853]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When the user doesn't have rights to access the installation directory,
the sdk installation will fail, add sudo to fix this.
[YOCTO #4760]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
[YOCTO #4758]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The perl module for automake has an embedded path in it, this needs
to be relocated.
Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.
1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text
2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines
[YOCTO #4550]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This was already fixed for meta-toolchain.
[YOCTO #4157]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
This patch addresses an SDK installer issue on older distributions if
the installation takes place in another directory than the default one. In
fact, is all about the 'file' utility version used for determining if a
file is a text file. For example, for a perl script, newer 'file' versions
return:
"...script, ASCII text executable"
while older versions return:
"...script text executable"
Hence the regex pattern didn't match the scripts.
Also the patch contains two unrelated minor fixes:
* return an exit code of 1 instead of -1 when installation machine is
not supported. That because on an older distribution we also get this
error message: "exit: 9: Illegal number: -1";
* remove unnecessary $SUDO_EXEC prefix to grep;
[YOCTO #3538]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is needed if installation is done in a directory that needs root
privileges.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
If the installation is done in a directory which already contains a
valid installation, opkg will not install anything and the moving the
contents of /install/dir/opt/poky/1.2 (for example) to /install/dir will
throw some errors. However, the install directory will not be affected.
This patch will ensure that the /install/dir/opt/poky/1.2 exists.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
When the cross canadian toolchains are installed, for different
architectures, they might contain common files. This leads to
installation failures since the opkg, by default, does not overwrite
files. This issue happens, for example, for binutils packages (that
contain the same locale files) or gdb (which installs some syscalls xml
files). The locale files could be removed from the binutils
cross-canadian package but we cannot do the same for the syscalls GDB
files which are used by GDB to display user friendly names for the
syscall numbers. Hence, the best solution is to force opkg to overwrite
these files.
[YOCTO #3109]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In a few places, we have scripts which use <rootfs>/var/pseudo for
the pseudo state directory controlling a given filesystem. This
seems possibly risky because it means that stuff running under
qemu or whatnot could wipe out the data being used to handle that
rootfs. Move this to:
<rootfs>/../$(basename_rootfs).pseudo_state
to avoid problems.
This also solves at least one case (not directly hit by yocto's
tree) wherein you could end up trying to remove a rootfs while
pseudo was using a database inside that rootfs, and thus the
remove would fail.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
|
|
Since we made the SDK relocatable, we have to add this functionality to
adt-installer too.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Adpated to the new environment file name for powerpc, due to the oe-core
commit c2d96179.
Fixed bug [YOCTO #2055].
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #2055]
1. Corrected the wrong environment file name for powerpc.
2. Removed unnecessary variables in adt_installer.conf.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #1909]
Install autoconf-nativesdk and automake-nativesdk to host.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
template for installation"
This reverts commit ae4ad20edbb6ea023155f7ae2b00871d479e370d.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
all arch template for installation
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
|
replacing hardcoded values
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This patch is for fixing the x86-64 image name bug and also,
do_patch must be done before do_deploy.
Signed-off-by: Liping Ke <liping.ke@intel.com>
|
|
for ipk files on ppc, the name should be powerpc. So does the
environment file name. For the tar file name, it should be ppc.
This patch is to correct the arch/machine name pair.
Related Bug#864
Signed-off-by: Liping ke <liping.ke@intel.com>
|
|
opgk option --force-overwrite is only a workaround for bug #547.
Now this bug is gone, so remove this option.
and also, the first opkg repo source is not useful, remove it.
Signed-off-by: Liping Ke <liping.ke@intel.com>
|
|
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
On Suse linux11.2, we found when using sudo, we must add -E opts
to preserver some network proxy environment settings. Otherwise,
opkg-cl can't access files behind firewall. [bug #785]
Also, we need to add absolute path when sourcing files.
Fix for [bug #786]
Signed-off-by: Liping Ke <liping.ke@intel.com>
|
|
We need to add libtool native sdk support in ADT installer.
This patch fix #bug 791
Signed-off-by: Liping Ke <liping.ke@intel.com>
|
|
Two bugs are found
1) image download file path is not correct. So even if file is downloaded
already, it can't be detected.
2) several images now are renamed, such as sato-dev, sato-sdk, we need to change the name
accordingly.
Signed-off-by: Liping Ke <liping.ke@intel.com>
|
|
When meeting errors, the return number can't be directly compared with
-1. Actually, it might be represented as 255. The correct way is to
compared it with 0. If the result is non-zero number, we meet error.
This patch is for fixing [BUGID #742]
Signed-off-by: Liping Ke <liping.ke@intel.coom>
|
|
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
|
creating the intaller tar file under /tmp/deploy/sdk, and the adt-installer script files and config files, set the reference to adt repo entry empty before it's setup
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
|
Richard Purdie
Alejandro del Castillo
Chong Lu
Laurentiu Palcu
Jason Wessel
Beth Flanagan
Stefan Stanacar
Hongxu Jia
Peter Seebach
Lianhao Lu
Jessica Zhang
Liping Ke