diff options
| author |   Denys Dmytriyenko <denis@denix.org> | 2009-03-17 14:32:59 -0400 |
|---|---|---|
| committer | Denys Dmytriyenko <denis@denix.org> | 2009-03-17 14:32:59 -0400 |
| commit | 709c4d66e0b107ca606941b988bad717c0b45d9b (patch) | |
| tree | 37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/linux/linux-2.6.28 | |
| parent | fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff) | |
| download | openembedded-709c4d66e0b107ca606941b988bad717c0b45d9b.tar.gz | |
rename packages/ to recipes/ per earlier agreement
See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Diffstat (limited to 'recipes/linux/linux-2.6.28')
38 files changed, 20262 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.28/at91sam9263ek/defconfig b/recipes/linux/linux-2.6.28/at91sam9263ek/defconfig new file mode 100644 index 0000000000..72a8bb8e21 --- /dev/null +++ b/recipes/linux/linux-2.6.28/at91sam9263ek/defconfig @@ -0,0 +1,1713 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28 +# Wed Jan 28 15:11:30 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +CONFIG_ARCH_AT91SAM9263=y +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9263 Board Type +# +CONFIG_MACH_AT91SAM9263EK=y +# CONFIG_MACH_USB_A9263 is not set +# CONFIG_MACH_CSB737 is not set +# CONFIG_MACH_TOTEMNOVA is not set +# CONFIG_MACH_NEOCORE926 is not set + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_HW_HSIAO is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +CONFIG_MTD_ONENAND_GENERIC=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ATMEL_PWM is not set +# CONFIG_ATMEL_TCLIB is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +CONFIG_MACB_TX_SRAM=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_DEBUG_VERBOSE=y +CONFIG_SND_PCM_XRUN_DEBUG=y +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_AT91_AC97=y +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_ATMEL_SOC=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +# CONFIG_EXT4_FS_XATTR is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +CONFIG_NLS_CODEPAGE_865=y +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-2.6.28/collie/0001-collie-start-scoop-converton-to-new-api.patch b/recipes/linux/linux-2.6.28/collie/0001-collie-start-scoop-converton-to-new-api.patch new file mode 100644 index 0000000000..51c161f99d --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0001-collie-start-scoop-converton-to-new-api.patch @@ -0,0 +1,106 @@ +From 4765c85914d55590c6d17b6cf9e6f7964d1af108 Mon Sep 17 00:00:00 2001 +From: Dmitry Baryshkov <dbaryshkov@gmail.com> +Date: Tue, 28 Oct 2008 21:41:39 +0300 +Subject: [PATCH 01/23] collie: start scoop converton to new api + +Start converting scoop gpio access to new API instead of old +deprecated one. + +Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> +--- + arch/arm/mach-sa1100/collie.c | 28 +++++++++++++++++++++++----- + arch/arm/mach-sa1100/include/mach/collie.h | 7 ++++--- + 2 files changed, 27 insertions(+), 8 deletions(-) + +diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c +index fe28999..8cf267f 100644 +--- a/arch/arm/mach-sa1100/collie.c ++++ b/arch/arm/mach-sa1100/collie.c +@@ -25,6 +25,7 @@ + #include <linux/mtd/mtd.h> + #include <linux/mtd/partitions.h> + #include <linux/timer.h> ++#include <linux/gpio.h> + + #include <mach/hardware.h> + #include <asm/mach-types.h> +@@ -55,6 +56,7 @@ static struct resource collie_scoop_resources[] = { + static struct scoop_config collie_scoop_setup = { + .io_dir = COLLIE_SCOOP_IO_DIR, + .io_out = COLLIE_SCOOP_IO_OUT, ++ .gpio_base = COLLIE_SCOOP_GPIO_BASE, + }; + + struct platform_device colliescoop_device = { +@@ -196,18 +198,34 @@ static struct mtd_partition collie_partitions[] = { + } + }; + ++static int collie_flash_init(void) ++{ ++ int rc; ++ rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable"); ++ if (rc) ++ return rc; ++ ++ rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1); ++ if (rc) ++ gpio_free(COLLIE_GPIO_VPEN); ++ ++ return rc; ++} ++ + static void collie_set_vpp(int vpp) + { +- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN); +- if (vpp) +- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN); +- else +- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN); ++ gpio_set_value(COLLIE_GPIO_VPEN, vpp); + } + ++static void collie_flash_exit(void) ++{ ++ gpio_free(COLLIE_GPIO_VPEN); ++} + static struct flash_platform_data collie_flash_data = { + .map_name = "cfi_probe", ++ .init = collie_flash_init, + .set_vpp = collie_set_vpp, ++ .exit = collie_flash_exit, + .parts = collie_partitions, + .nr_parts = ARRAY_SIZE(collie_partitions), + }; +diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h +index 69e9624..9bc5349 100644 +--- a/arch/arm/mach-sa1100/include/mach/collie.h ++++ b/arch/arm/mach-sa1100/include/mach/collie.h +@@ -14,6 +14,7 @@ + #define __ASM_ARCH_COLLIE_H + + ++#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) + #define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 + #define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 + #define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13 +@@ -21,13 +22,13 @@ + #define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15 + #define COLLIE_SCP_5VON SCOOP_GPCR_PA16 + #define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 +-#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18 ++#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7) + #define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 + + #define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ +- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \ ++ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \ + COLLIE_SCP_LB_VOL_CHG ) +-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \ ++#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ + COLLIE_SCP_CHARGE_ON ) + + /* GPIOs for which the generic definition doesn't say much */ +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0002-add-locomo_spi-driver.patch b/recipes/linux/linux-2.6.28/collie/0002-add-locomo_spi-driver.patch new file mode 100644 index 0000000000..7530beee2c --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0002-add-locomo_spi-driver.patch @@ -0,0 +1,1228 @@ +From dae5d7c71ba47bdd0603d5cc3e8a3dfe28d209a0 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:30:32 +0200 +Subject: [PATCH 02/23] add locomo_spi driver + +--- + drivers/spi/Kconfig | 4 + + drivers/spi/Makefile | 1 + + drivers/spi/locomo_spi.c | 1097 ++++++++++++++++++++++++++++++++++++++++++++++ + drivers/spi/locomo_spi.h | 75 ++++ + 4 files changed, 1177 insertions(+), 0 deletions(-) + create mode 100644 drivers/spi/locomo_spi.c + create mode 100644 drivers/spi/locomo_spi.h + +diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig +index b9d0efb..aa3c60a 100644 +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -123,6 +123,10 @@ config SPI_MPC52xx_PSC + This enables using the Freescale MPC52xx Programmable Serial + Controller in master SPI mode. + ++config SPI_LOCOMO ++ tristate "Locomo SPI master" ++ depends on SPI_MASTER && SHARP_LOCOMO && EXPERIMENTAL ++ + config SPI_MPC83xx + tristate "Freescale MPC83xx/QUICC Engine SPI controller" + depends on (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL +diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile +index ccf18de..794dd45 100644 +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o + obj-$(CONFIG_SPI_TXX9) += spi_txx9.o + obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o + obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o ++obj-$(CONFIG_SPI_LOCOMO) += locomo_spi.o + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) +diff --git a/drivers/spi/locomo_spi.c b/drivers/spi/locomo_spi.c +new file mode 100644 +index 0000000..d3a4bd9 +--- /dev/null ++++ b/drivers/spi/locomo_spi.c +@@ -0,0 +1,1097 @@ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/stat.h> ++#include <linux/delay.h> ++#include <linux/wait.h> ++#include <linux/interrupt.h> ++#include <asm/hardware/locomo.h> ++#include <asm/errno.h> ++#include <linux/mmc/host.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/mmc_spi.h> ++#include <linux/workqueue.h> ++#include <linux/spinlock.h> ++#include <linux/list.h> ++#include "locomo_spi.h" ++static struct locomospi_dev * spidev; ++static struct work_struct transfer_wq; ++int delay; ++ ++char* transtxbuf=(char*)NULL; ++char* transrxbuf=(char*)NULL; ++int transfercount=0, transfersize=0; ++static DECLARE_WAIT_QUEUE_HEAD(transferqueue); ++/* MMC_SPI functions *********************************************************/ ++ ++static int locomommcspi_init(struct device *dev, irqreturn_t (*isr)(int, void*), void *mmc) ++{ ++ int result; ++ result=request_irq(IRQ_LOCOMO_CARDDETECT, isr, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "locomo-spi", mmc); ++ return result; ++} ++ ++static void locomommcspi_exit(struct device *dev, void* mmc) ++{ ++ free_irq(IRQ_LOCOMO_CARDDETECT, mmc); ++} ++ ++static int locomommcspi_getro(struct device *dev) ++{ ++ return locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT) > 0 ? 1 : 0; ++} ++ ++static void locomommcspi_setpower(struct device *dev, unsigned int mask) ++{ ++ if(!mask && spidev->card_power) ++ locomospi_power(0); ++ else if( !spidev->card_power ) ++ locomospi_power(1); ++ ++} ++ ++ ++static struct mmc_spi_platform_data colliemmc ={ ++ .init = locomommcspi_init, ++ .exit = locomommcspi_exit, ++ .detect_delay = 200, ++ .get_ro = locomommcspi_getro, ++ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, ++ .setpower = locomommcspi_setpower, ++ .powerup_msecs = 200, ++}; ++ ++/* Utility function **********************************************************/ ++ ++static void locomospi_power(int on) ++{ ++ locomo_gpio_write(spidev->ldev->dev.parent, LOCOMO_GPIO_CARD_POWER, on); ++ spidev->card_power=on; ++ printk(KERN_DEBUG "locomospi: power %d\n",on); ++} ++ ++static void locomospi_setclock(unsigned int div, unsigned int clock) ++{ ++ u16 r = ioread16(spidev->base+LOCOMO_SPIMD); ++ div &= 0x7; ++ clock &= 0x3; ++ if(clock != spidev->clock_base || div != spidev->clock_div){ ++ r &= ~(LOCOMO_SPI_XSEL | LOCOMO_SPI_CLKSEL | LOCOMO_SPI_XEN); ++ iowrite16(r,spidev->base+LOCOMO_SPIMD); ++ r |= (div | (clock <<3) | LOCOMO_SPI_XEN); ++ iowrite16(r,spidev->base+LOCOMO_SPIMD); ++ spidev->clock_div = div; ++ spidev->clock_base = clock; ++ udelay(300); ++ } ++ ++} ++// returns 1 if card ist present, 0 otherwise ++static int locomospi_carddetect() ++{ ++ return (locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1; ++} ++ ++static void locomospi_setcs(int high) ++{ ++ u16 r; ++ printk(KERN_DEBUG "locomospi: cs %d\n",high); ++ r = ioread16(spidev->base + LOCOMO_SPICT); ++ if(high) ++ r |= LOCOMO_SPI_CS; ++ else ++ r &= ~LOCOMO_SPI_CS; ++ iowrite16(r, spidev->base + LOCOMO_SPICT); ++} ++ ++static void locomospi_reg_open() ++{ ++ u16 r; ++ spidev->clock_div = DIV_64; ++ spidev->clock_base = CLOCK_18MHZ; ++ locomospi_power(1); ++ msleep(100); ++// iowrite16( 0xec00 | (CLOCK_18MHZ <<3)|DIV_64, spidev->base+LOCOMO_SPIMD); ++ iowrite16( LOCOMO_SPI_MSB1ST | LOCOMO_SPI_DOSTAT | LOCOMO_SPI_RCPOL | LOCOMO_SPI_TCPOL ++ |(CLOCK_18MHZ <<3) | DIV_64, spidev->base+LOCOMO_SPIMD); ++// if(locomospi_carddetect()){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16( r, spidev->base+LOCOMO_SPIMD); ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XEN; ++ iowrite16( r, spidev->base+LOCOMO_SPIMD); ++// } ++ iowrite16( LOCOMO_SPI_CS, spidev->base+LOCOMO_SPICT); ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r |= (LOCOMO_SPI_CEN | LOCOMO_SPI_RXUEN | LOCOMO_SPI_ALIGNEN); ++ iowrite16( r, spidev->base+LOCOMO_SPICT); ++ udelay(200); ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r &= ~LOCOMO_SPI_CS; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++} ++ ++static void locomospi_reg_release() ++{ ++ u16 r; ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r &= ~LOCOMO_SPI_CEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r &= ~LOCOMO_SPI_XEN; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r &= ~LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r |= LOCOMO_SPI_XEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ locomospi_power(0); ++} ++#if 0 ++static int txrx(const char* txbuffer, char* rxbuffer, int size) ++{ ++ u16 r = ioread16(spidev->base+LOCOMO_SPICT); ++ r |= LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ printk(KERN_DEBUG "locomospi: %d bytes to prozess\n",size); ++ /* initialize global vars for isr */ ++ transfercount=0; transfersize=size; ++ transtxbuf=txbuffer; transrxbuf=rxbuffer; ++ ++ /* start transmit and go sleep isr will wake us*/ ++ enable_irq(IRQ_LOCOMO_SPI_TEND); ++ iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD); ++ wait_event(transferqueue, transfercount >= transfersize); ++ disable_irq(IRQ_LOCOMO_SPI_TEND); ++ transrxbuf=NULL; transtxbuf=NULL; ++ ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r &= ~LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ int i; ++ for(i=0; i< size; i++) ++ printk(KERN_DEBUG "locomospi: sent: %x received: %x \n",txbuffer[i], rxbuffer[i]); ++ ++ ++ return size; ++} ++ ++ ++static int tx(const char* txbuffer, int size) ++{ ++ printk(KERN_DEBUG "locomospi: %d bytes to send\n",size); ++ /* initialize global vars for isr */ ++ transfercount=0; transfersize=size; ++ transtxbuf=txbuffer; ++ ++ /* start transmit and go sleep isr will wake us*/ ++ enable_irq(IRQ_LOCOMO_SPI_RFW); ++ iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD); ++ wait_event(transferqueue, transfercount >= transfersize); ++ disable_irq(IRQ_LOCOMO_SPI_RFW); ++ transtxbuf=NULL; ++ ++ int i; ++ for(i=0; i< size; i++) ++ printk(KERN_DEBUG "locomospi: sent: %x\n",txbuffer[i]); ++ ++ ++ return size; ++} ++ ++static int rx(char* rxbuffer, int size) ++{ ++ printk(KERN_DEBUG "locomospi: %d bytes to read\n",size); ++ /* initialize global vars for isr */ ++ transfercount=0; transfersize=size; ++ transrxbuf=rxbuffer; ++ ++ /* start transmit and go sleep isr will wake us*/ ++ enable_irq(IRQ_LOCOMO_SPI_RFR); ++ rxbuffer[0]=ioread8(spidev->base+LOCOMO_SPIRD); ++ wait_event(transferqueue, transfercount >= transfersize); ++ disable_irq(IRQ_LOCOMO_SPI_RFR); ++ transrxbuf=NULL; ++ ++ int i; ++ for(i=0; i< size; i++) ++ printk(KERN_DEBUG "locomospi: received: %x \n", rxbuffer[i]); ++ ++ ++ return size; ++} ++ ++#else ++static int txrx(const char* txbuffer, char* rxbuffer, int size) ++{ ++ int i=0,j=0; ++ int wait; ++ u16 r; ++/* char * txback = kmalloc(size * sizeof(char), GFP_KERNEL); ++ memcpy(txback, txbuffer, size); ++*/ ++ if(spidev->clock_div == 4) ++ wait = 0x10000; ++ else ++ wait = 8; ++ ++// printk(KERN_DEBUG "locomospi: txrx %d bytes to prozess\n",size); ++ ++// r = ioread16(spidev->base+LOCOMO_SPICT); ++// r |= LOCOMO_SPI_ALIGNEN; ++// iowrite16(r, spidev->base+LOCOMO_SPICT); ++ //discard first bogus byte ++ ++ ioread8(spidev->base+LOCOMO_SPIRD); ++ for(i=0; i<size; i++){ ++ for(j=0; j <= wait; j++){ ++ if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW) ++ break; ++ } ++ iowrite8(txbuffer[i], spidev->base+LOCOMO_SPITD); ++ ndelay(delay); ++ ++ for(j=0; j <= wait; j++){ ++ if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR) ++ break; ++ } ++ rxbuffer[i] = ioread8(spidev->base+LOCOMO_SPIRD); ++ ndelay(delay); ++ } ++// r = ioread16(spidev->base+LOCOMO_SPICT); ++// r &= ~LOCOMO_SPI_ALIGNEN; ++// iowrite16(r, spidev->base+LOCOMO_SPICT); ++ ++/* for(j=0; j< size; j++) ++ printk(KERN_DEBUG "locomospi: sent: %x received: %x \n",txback[j], rxbuffer[j]); ++ ++ kfree(txback); ++*/ return i; ++} ++ ++static int tx(const char* buffer, int size) ++{ ++ int i=0,j=0; ++ int wait; ++ u16 r; ++ if(spidev->clock_div == 4) ++ wait = 0x10000; ++ else ++ wait = 8; ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r &= ~LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ ++// printk(KERN_DEBUG "locomospi: tx %d bytes to transmit\n",size); ++ for(i=0; i<size; i++){ ++ for(j=0; j <= wait; j++){ ++ if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW) ++ break; ++ } ++ iowrite8(buffer[i], spidev->base+LOCOMO_SPITD); ++ ndelay(delay); ++ } ++ ++ for(j=0; j <= wait; j++){ ++ if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_TEND) ++ break; ++ } ++ ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r |= LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ ++// for(j=0; j< size; j++) ++// printk(KERN_DEBUG "locomospi: sent: %x \n", buffer[j]); ++// printk(KERN_DEBUG "locomospi: tx %d bytes transmitted\n",i); ++ return i; ++} ++ ++static int rx(char* buffer, int size) ++{ ++ int i,j; ++ int wait; ++ u16 r; ++ printk(KERN_DEBUG "locomospi: rx %d bytes to receive\n",size); ++ if(spidev->clock_div == 4) ++ wait = 0x10000; ++ else ++ wait = 8; ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r &= ~LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ ++ for(i=0; i<size; i++){ ++ ++ for(j=0; j <= wait; j++){ ++ if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR) ++ break; ++ } ++ buffer[i]= ioread8(spidev->base+LOCOMO_SPIRD); ++ ndelay(delay); ++ } ++ ++ r = ioread16(spidev->base+LOCOMO_SPICT); ++ r |= LOCOMO_SPI_ALIGNEN; ++ iowrite16(r, spidev->base+LOCOMO_SPICT); ++ ++ for(j=0; j< size; j++) ++ printk(KERN_DEBUG "locomospi: received: %x \n", buffer[j]); ++ printk(KERN_DEBUG "locomospi: rx %d bytes received\n",i); ++ return i; ++} ++#endif ++/* ++static irqreturn_t locomospi_rwready(int irq, void *dev_id) ++{ ++ struct locomospi_dev* dev=(struct locomospi_dev*) dev_id; ++// dev_dbg(&spidev->sdev->dev, "IRQ: %d\n", irq); ++// printk(KERN_DEBUG "locomospi: IRQ: %d\n", irq); ++ wake_up_interruptible(&dev->waitqueue); ++ return IRQ_HANDLED; ++} ++*/ ++static irqreturn_t locomospi_testisr(int irq, void *dev_id) ++{ ++ char *buf=""; ++ switch(irq){ ++ case IRQ_LOCOMO_SPI_RFR: buf="RFR"; ++ break; ++ case IRQ_LOCOMO_SPI_RFW: buf="RFW"; ++ break; ++ case IRQ_LOCOMO_SPI_REND:buf="REND"; ++ break; ++ case IRQ_LOCOMO_SPI_TEND:buf="TEND"; ++ break; ++ case IRQ_LOCOMO_CARDDETECT: ++ buf="CARD_DETECT"; ++ break; ++ default: return IRQ_NONE; ++ } ++ printk(KERN_DEBUG "locomospi: IRQ: %s\n",buf); ++// dev_dbg(&spidev->sdev->dev, "IRQ: %s\n",buf); ++ return IRQ_HANDLED; ++} ++static irqreturn_t locomospi_txrxisr(int irq, void *dev_id) ++{ ++ if(transfercount < transfersize){ ++ transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD); ++ iowrite8(transtxbuf[transfercount], spidev->base+LOCOMO_SPITD); ++ } ++ else{ ++ /* transfer complete. wake up txrx */ ++ wake_up(&transferqueue); ++ } ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t locomospi_txisr(int irq, void *dev_id) ++{ ++ if(transfercount < transfersize){ ++ iowrite8(transtxbuf[transfercount++], spidev->base+LOCOMO_SPITD); ++ } ++ else{ ++ /* transfer complete. wake up txrx */ ++ wake_up(&transferqueue); ++ } ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t locomospi_rxisr(int irq, void *dev_id) ++{ ++ if(transfercount < transfersize){ ++ transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD); ++ } ++ else{ ++ /* transfer complete. wake up txrx */ ++ wake_up(&transferqueue); ++ } ++ return IRQ_HANDLED; ++} ++ ++static void locomospi_clock(unsigned int Hz) ++{ ++ u16 r; ++ printk(KERN_DEBUG "locomospi: changing clock to: %d\n", Hz); ++ if(Hz == 0){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r &= ~LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ } ++ else if(Hz >= 24576000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_1, CLOCK_25MHZ); ++ delay=41; ++ } ++ else if(Hz >= 22579200){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_1, CLOCK_22MHZ); ++ delay=45; ++ } ++ else if(Hz >= 18432000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_1, CLOCK_18MHZ); ++ delay=55; ++ } ++ else if(Hz >= 12288000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_2, CLOCK_25MHZ); ++ delay=82; ++ } ++ else if(Hz >= 11289600){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_2, CLOCK_22MHZ); ++ delay=89; ++ } ++ else if(Hz >= 9216000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_2, CLOCK_18MHZ); ++ delay=110; ++ } ++ else if(Hz >= 6144000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_4, CLOCK_25MHZ); ++ delay=164; ++ } ++ else if(Hz >= 5644800){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_4, CLOCK_22MHZ); ++ delay=178; ++ } ++ else if(Hz >= 4608000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_4, CLOCK_18MHZ); ++ delay=218; ++ } ++ else if(Hz >= 3072000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_8, CLOCK_25MHZ); ++ delay=327; ++ } ++ else if(Hz >= 2822400){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_8, CLOCK_22MHZ); ++ delay=355; ++ } ++ else if(Hz >= 2304000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_8, CLOCK_18MHZ); ++ delay=435; ++ } ++ else if(Hz >= 384000){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_64, CLOCK_25MHZ); ++ delay=2605; ++ } ++ else if(Hz >= 352800){ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_64, CLOCK_22MHZ); ++ delay=2834; ++ } ++ else{ /* set to 288 KHz */ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_XON; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ locomospi_setclock(DIV_64, CLOCK_18MHZ); ++ delay=3473; ++ } ++ spidev->clock = Hz; ++} ++ ++/* sysfs attributes used for debug *******************************************/ ++ ++/* SPI registers */ ++ssize_t locomospi_showspimd(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIMD)); ++} ++ ++ssize_t locomospi_storespimd(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIMD); ++ return count; ++} ++static DRIVER_ATTR(spimd, S_IWUSR | S_IRUGO, locomospi_showspimd, locomospi_storespimd); ++ ++ssize_t locomospi_showspict(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPICT)); ++} ++ ++ssize_t locomospi_storespict(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPICT); ++ return count; ++} ++static DRIVER_ATTR(spict, S_IWUSR | S_IRUGO, locomospi_showspict, locomospi_storespict); ++ ++ssize_t locomospi_showspist(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIST)); ++} ++ ++ssize_t locomospi_storespist(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIST); ++ return count; ++} ++static DRIVER_ATTR(spist, S_IWUSR | S_IRUGO, locomospi_showspist, locomospi_storespist); ++ ++ssize_t locomospi_showspitd(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITD)); ++} ++ ++ssize_t locomospi_storespitd(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITD); ++ return count; ++} ++static DRIVER_ATTR(spitd, S_IWUSR | S_IRUGO, locomospi_showspitd, locomospi_storespitd); ++ ++ssize_t locomospi_showspird(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRD)); ++} ++ ++ssize_t locomospi_storespird(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRD); ++ return count; ++} ++static DRIVER_ATTR(spird, S_IWUSR | S_IRUGO, locomospi_showspird, locomospi_storespird); ++ ++ssize_t locomospi_showspits(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITS)); ++} ++ ++ssize_t locomospi_storespits(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITS); ++ return count; ++} ++static DRIVER_ATTR(spits, S_IWUSR | S_IRUGO, locomospi_showspits, locomospi_storespits); ++ ++ssize_t locomospi_showspirs(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRS)); ++} ++ ++ssize_t locomospi_storespirs(struct device_driver *drv, const char *buf, size_t count) ++{ ++ iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRS); ++ return count; ++} ++static DRIVER_ATTR(spirs, S_IWUSR | S_IRUGO, locomospi_showspirs, locomospi_storespirs); ++ ++/* MMC Card status */ ++ ++ssize_t locomospi_showpower(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", spidev->card_power); ++} ++ ++ssize_t locomospi_storepower(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomospi_power(simple_strtoul(buf, NULL, 10)); ++ return count; ++} ++static DRIVER_ATTR(cardpower, S_IWUSR | S_IRUGO, locomospi_showpower, locomospi_storepower); ++ ++ssize_t locomospi_detectcard(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1); ++} ++static DRIVER_ATTR(carddetect, S_IRUGO, locomospi_detectcard, NULL); ++ ++ssize_t locomospi_writeprotect(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT)>0)?1:0); ++} ++static DRIVER_ATTR(cardwriteprotect, S_IRUGO, locomospi_writeprotect, NULL); ++ ++ ++ssize_t locomospi_showclock(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", spidev->clock); ++} ++ ++ssize_t locomospi_storeclock(struct device_driver *drv, const char *buf, size_t count) ++{ ++ locomospi_clock(simple_strtoul(buf, NULL, 10)); ++ return count; ++} ++static DRIVER_ATTR(clock, S_IWUSR | S_IRUGO, locomospi_showclock, locomospi_storeclock); ++ ++/* debug */ ++ssize_t locomospi_showdelay(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "%d\n", delay); ++} ++ ++ssize_t locomospi_storedelay(struct device_driver *drv, const char *buf, size_t count) ++{ ++ delay=simple_strtoul(buf,NULL,10); ++ return count; ++} ++static DRIVER_ATTR(delay, S_IWUSR | S_IRUGO, locomospi_showdelay, locomospi_storedelay); ++ ++ssize_t locomospi_reset(struct device_driver *drv, const char *buf, size_t count) ++{ ++ int choice = simple_strtoul(buf, NULL, 10); ++ char buff[100]; ++ u16 r; ++ switch(choice){ ++ case 0: locomospi_reg_release(); ++ schedule_timeout(2*HZ); ++ locomospi_reg_open(); ++ break; ++ case 1: { ++ char b1[] = "\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"; ++ char b2[] = "\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"; ++ locomospi_setcs(1); ++ txrx(b1,b1,17); ++ locomospi_setcs(0); ++ txrx(b2,b2,18); ++ ++ } ++ break; ++ case 2: locomospi_setcs(1); ++ txrx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,18); ++ locomospi_setcs(0); ++ txrx("\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,17); ++ break; ++ case 3: ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r |= LOCOMO_SPI_LOOPBACK; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ txrx("X",buff,1); ++ txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36); ++ txrx("Y",buff,1); ++ udelay(100); ++ txrx("Z",buff,1); ++ schedule_timeout(HZ); ++ txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36); ++ ++ r = ioread16(spidev->base+LOCOMO_SPIMD); ++ r &= ~LOCOMO_SPI_LOOPBACK; ++ iowrite16(r, spidev->base+LOCOMO_SPIMD); ++ break; ++ default: /* do nothing */; ++ } ++ return count; ++} ++static DRIVER_ATTR(reset, S_IWUSR, NULL, locomospi_reset); ++ ++typedef struct locomo_reg_entry { ++ u32 addr; ++ char* name; ++} locomo_reg_entry_t; ++#define LCM (sizeof(locomo_regs)/sizeof(locomo_reg_entry_t)) ++static locomo_reg_entry_t locomo_regs[] = ++{ ++/* { addr, name, description } */ ++ { 0x00, "VER" }, ++ { 0x04, "ST" }, ++ { 0x08, "C32K" }, ++ { 0x0C, "ICR" }, ++ { 0x10, "MCSX0" }, ++ { 0x14, "MCSX1" }, ++ { 0x18, "MCSX2" }, ++ { 0x1C, "MCSX3" }, ++ { 0x20, "ASD" }, ++ { 0x28, "HSD" }, ++ { 0x2C, "HSC" }, ++ { 0x30, "TADC" }, ++ { 0x38, "TC" }, ++ { 0x3C, "CPSD" }, ++ { 0x40, "KIB" }, ++ { 0x44, "KSC" }, ++ { 0x48, "KCMD" }, ++ { 0x4C, "KIC" }, ++ { 0x54, "ACC" }, ++ { 0x60, "SPIMD" }, ++ { 0x64, "SPICT" }, ++ { 0x68, "SPIST" }, ++ { 0x70, "SPIIS" }, ++ { 0x74, "SPIWE" }, ++ { 0x78, "SPIIE" }, ++ { 0x7C, "SPIIR" }, ++ { 0x80, "SPITD" }, ++ { 0x84, "SPIRD" }, ++ { 0x88, "SPITS" }, ++ { 0x8C, "SPIRS" }, ++ { 0x90, "GPD" }, ++ { 0x94, "GPE" }, ++ { 0x98, "GPL" }, ++ { 0x9C, "GPO" }, ++ { 0xa0, "GRIE" }, ++ { 0xa4, "GFIE" }, ++ { 0xa8, "GIS" }, ++ { 0xac, "GWE" }, ++ { 0xb0, "GIE" }, ++ { 0xb4, "GIR" }, ++ { 0xc8, "ALC" }, ++ { 0xcc, "ALR" }, ++ { 0xd0, "PAIF" }, ++ { 0xd8, "LTC" }, ++ { 0xdc, "LTINT" }, ++ { 0xe0, "DAC" }, ++ { 0xe8, "LPT0" }, ++ { 0xec, "LPT1" }, ++ { 0xfc, "TCR" }, ++}; ++ ++static ssize_t lcm_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ int base = spidev->base - LOCOMO_SPI; ++ char b[4000]=""; ++ char c[30]; ++ int i; ++ for(i=0; i<LCM; i++){ ++ sprintf(c,"%s:\t\t 0x%x\n",locomo_regs[i].name, ioread16(base + locomo_regs[i].addr)); ++ strcat(b,c); ++ } ++ return sprintf(buf,"%s",b); ++} ++ ++static DRIVER_ATTR(regs, 0444, lcm_show, NULL); ++ ++ ++/* SPI functions *************************************************************/ ++ ++static void locomospi_do_transfer(struct work_struct *wrk) ++{ ++ struct list_head *mptr, *tptr, *mptr2; ++ struct spi_transfer *entry; ++ struct spi_message *msg; ++ ++ list_for_each_safe(mptr, mptr2, &spidev->message_list){ ++ msg = list_entry(mptr, struct spi_message, queue); ++ ++ msg->status = 0; ++ msg->actual_length = 0; ++ list_for_each(tptr, &msg->transfers){ ++ entry = list_entry(tptr, struct spi_transfer, transfer_list); ++ if(entry->tx_buf && entry->rx_buf){ //duplex ++ txrx((char*) entry->tx_buf, (char*) entry->rx_buf, entry->len); ++ msg->actual_length += entry->len; ++ } else if(entry->tx_buf && !entry->rx_buf){ //write ++ tx((char*) entry->tx_buf, entry->len); ++ msg->actual_length += entry->len; ++ } else if(!entry->tx_buf && entry->rx_buf){ //read ++ rx((char*) entry->rx_buf, entry->len); ++ msg->actual_length += entry->len; ++ } else if(!entry->tx_buf && !entry->rx_buf){ //error ++ dev_err(&spidev->sdev->dev, "do_transfer: no buffers allocated\n"); ++ msg->status = -EFAULT; ++ } ++ } ++ spin_lock(&spidev->message_lock); ++ list_del(mptr); ++ spin_unlock(&spidev->message_lock); ++ msg->complete(msg->context); ++ } ++} ++ ++static int locomospi_setup(struct spi_device *spi) ++{ ++ if((spi->mode & SPI_CS_HIGH) != (spidev->spimode & SPI_CS_HIGH)) ++ locomospi_setcs(spi->mode & SPI_CS_HIGH ? 1 : 0 ); ++ if(spidev->clock != spi->max_speed_hz){ ++ locomospi_clock(spi->max_speed_hz); ++ } ++ spidev->spimode = spi->mode; ++ ++ return 0; ++} ++ ++static int locomospi_transfer(struct spi_device *spi, struct spi_message *msg) ++{ ++ ++ spin_lock(&spidev->message_lock); ++ list_add_tail(&msg->queue, &spidev->message_list); ++ spin_unlock(&spidev->message_lock); ++ schedule_work(&transfer_wq); ++ return 0; ++} ++ ++static struct locomo_driver locomo_spi_driver = { ++ .drv = { ++ .name = "locomo-spi", ++ }, ++ .devid = LOCOMO_DEVID_SPI, ++ .probe = locomospi_probe, ++ .remove = locomospi_remove, ++#ifdef CONFIG_PM ++ .suspend = locomospi_suspend, ++ .resume = locomospi_resume, ++#endif ++}; ++ ++static struct spi_board_info board = { ++ .modalias = "mmc_spi", ++ .platform_data = (void*) &colliemmc, ++ .controller_data= NULL, ++ .irq = 0, ++ .max_speed_hz = 25000000, ++ .bus_num = 0, ++ .chip_select = 0, ++ .mode = 0, ++}; ++ ++#ifdef CONFIG_PM ++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state) ++{ ++ disable_irq(IRQ_LOCOMO_CARDDETECT); ++ return 0; ++} ++ ++static int locomospi_resume(struct locomo_dev *dev) ++{ ++ enable_irq(IRQ_LOCOMO_CARDDETECT); ++ return 0; ++} ++#endif ++ ++static int locomospi_probe(struct locomo_dev *dev) ++{ ++ int result=0; ++ printk(KERN_DEBUG "Collie MMC over SPI Driver\n"); ++ spidev=kmalloc(sizeof(struct locomospi_dev),GFP_KERNEL); ++ if(!spidev){ ++ return -ENOMEM; ++ } ++ spidev->ldev = dev; ++ spidev->card_power = 1; ++ spidev->spimode = 0; ++ ++ if(!request_mem_region((unsigned long) dev->mapbase, dev->length, LOCOMO_DRIVER_NAME(dev))) { ++ dev_err(&dev->dev, " Can't aquire access to io memory\n"); ++ return -EBUSY; ++ } ++ spidev->base=(unsigned long) dev->mapbase; ++ locomospi_reg_open(); ++ ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_POWER, 0); ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_DETECT, 1); ++ locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_WRITE_PROT, 1); ++ ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardpower); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_carddetect); ++ if(result){ ++ dev_err(&dev->dev,"error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardwriteprotect); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spimd); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spict); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spist); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spitd); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spird); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spits); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spirs); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_clock); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_delay); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_reset); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_regs); ++ if(result){ ++ dev_err(&dev->dev, "error creating driver attribute\n"); ++ goto region; ++ } ++ INIT_WORK(&transfer_wq, locomospi_do_transfer); ++ INIT_LIST_HEAD(&spidev->message_list); ++ spin_lock_init(&spidev->message_lock); ++ init_waitqueue_head(&spidev->waitqueue); ++ spidev->master=spi_alloc_master(&dev->dev,0); ++ if(!spidev->master){ ++ result=-ENOMEM; ++ goto region; ++ } ++ spidev->master->bus_num = 0; ++ spidev->master->num_chipselect = 1; ++ spidev->master->setup = locomospi_setup; ++ spidev->master->transfer = locomospi_transfer; ++ spidev->sdev = spi_new_device(spidev->master, &board); ++ if(!spidev->sdev){ ++ dev_err(&dev->dev, "failed to register spi device\n"); ++ result = -EINVAL; ++ goto master; ++ } ++/* result=request_irq(IRQ_LOCOMO_SPI_RFR, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: RFR\n"); ++ goto regdev; ++ } ++ //disable_irq(IRQ_LOCOMO_SPI_RFR); ++*//* result=request_irq(IRQ_LOCOMO_SPI_RFW, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: RFW\n"); ++ goto irq1; ++ } ++ //disable_irq(IRQ_LOCOMO_SPI_RFW); ++*//* result=request_irq(IRQ_LOCOMO_SPI_REND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: REND\n"); ++ goto irq2; ++ } ++*//* result=request_irq(IRQ_LOCOMO_SPI_TEND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev); ++ if(result) { ++ dev_err(&dev->dev, "Could not get IRQ: TEND\n"); ++ goto irq3; ++ } ++ //disable_irq(IRQ_LOCOMO_SPI_TEND); ++*/ spidev->workqueue = create_singlethread_workqueue("locomo-spi"); ++ if(!spidev->workqueue){ ++ dev_err(&dev->dev, "failed to create workqueue\n"); ++ goto irq4; ++ } ++ result=spi_register_master(spidev->master); ++ if(result){ ++ dev_err(&dev->dev, "failed to register spimaster\n"); ++ goto wq; ++ } ++ return 0; ++wq: ++ destroy_workqueue(spidev->workqueue); ++irq4: ++// free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev); ++irq3: ++// free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev); ++irq2: ++// free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev); ++irq1: ++// free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev); ++regdev: ++ spi_unregister_device(spidev->sdev); ++master: ++ spi_master_put(spidev->master); ++region: ++ release_mem_region((unsigned long) dev->mapbase, dev->length); ++ kfree(spidev); ++ return result; ++ ++} ++ ++static int locomospi_remove(struct locomo_dev *dev) ++{ ++ spi_unregister_device(spidev->sdev); ++ spi_unregister_master(spidev->master); ++ destroy_workqueue(spidev->workqueue); ++ locomospi_reg_release(); ++// free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev); ++// free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev); ++ spi_master_put(spidev->master); ++ release_mem_region((unsigned long) dev->mapbase, dev->length); ++ kfree(spidev); ++ return 0; ++} ++ ++ ++ ++static int __init locomospi_init(void) ++{ ++ int ret = locomo_driver_register(&locomo_spi_driver); ++ if (ret) ++ return ret; ++ ++ ++ return 0; ++} ++ ++static void __exit locomospi_exit(void) ++{ ++ locomo_driver_unregister(&locomo_spi_driver); ++} ++ ++module_init(locomospi_init); ++module_exit(locomospi_exit); ++ ++MODULE_AUTHOR("Thomas Kunze thommy@tabao.de"); ++MODULE_DESCRIPTION("Collie mmc driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/spi/locomo_spi.h b/drivers/spi/locomo_spi.h +new file mode 100644 +index 0000000..7e1c0ce +--- /dev/null ++++ b/drivers/spi/locomo_spi.h +@@ -0,0 +1,75 @@ ++#include <asm/hardware/locomo.h> ++#ifndef __LOCOMO_SPI_H__ ++#define __LOCOMO_SPI_H__ ++ ++/* locomo-spi status register LOCOMO_SPIST */ ++#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */ ++#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */ ++#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */ ++#define LOCOMO_SPI_RFR (1) /* read buffer bit */ ++ ++/* locomo-spi mode register LOCOMO_SPIMD */ ++#define LOCOMO_SPI_LOOPBACK (1 << 15) /* loopback tx to rx */ ++#define LOCOMO_SPI_MSB1ST (1 << 14) /* send MSB first */ ++#define LOCOMO_SPI_DOSTAT (1 << 13) /* transmit line is idle high */ ++#define LOCOMO_SPI_TCPOL (1 << 11) /* transmit CPOL (maybe affects CPHA too) */ ++#define LOCOMO_SPI_RCPOL (1 << 10) /* receive CPOL (maybe affects CPHA too) */ ++#define LOCOMO_SPI_TDINV (1 << 9) /* invert transmit line */ ++#define LOCOMO_SPI_RDINV (1 << 8) /* invert receive line */ ++#define LOCOMO_SPI_XON (1 << 7) /* enable spi controller clock */ ++#define LOCOMO_SPI_XEN (1 << 6) /* clock bit write enable xon must be off, wait 300 us before xon->1 */ ++#define LOCOMO_SPI_XSEL 0x0018 /* clock select */ ++#define CLOCK_18MHZ 0 /* 18,432 MHz clock */ ++#define CLOCK_22MHZ 1 /* 22,5792 MHz clock */ ++#define CLOCK_25MHZ 2 /* 24,576 MHz clock */ ++#define LOCOMO_SPI_CLKSEL 0x7 ++#define DIV_1 0 /* don't divide clock */ ++#define DIV_2 1 /* divide clock by two */ ++#define DIV_4 2 /* divide clock by four */ ++#define DIV_8 3 /* divide clock by eight*/ ++#define DIV_64 4 /* divide clock by 64 */ ++ ++/* locomo-spi control register LOCOMO_SPICT */ ++#define LOCOMO_SPI_CRC16_7_B (1 << 15) /* 0: crc16 1: crc7 */ ++#define LOCOMO_SPI_CRCRX_TX_B (1 << 14) ++#define LOCOMO_SPI_CRCRESET_B (1 << 13) ++#define LOCOMO_SPI_CEN (1 << 7) /* ?? enable */ ++#define LOCOMO_SPI_CS (1 << 6) /* chip select */ ++#define LOCOMO_SPI_UNIT16 (1 << 5) /* 0: 8 bit units, 1: 16 bit unit */ ++#define LOCOMO_SPI_ALIGNEN (1 << 2) /* align transfer enable */ ++#define LOCOMO_SPI_RXWEN (1 << 1) /* continous receive */ ++#define LOCOMO_SPI_RXUEN (1 << 0) /* aligned receive */ ++ ++#define IRQ_LOCOMO_CARDDETECT IRQ_LOCOMO_GPIO13 ++ ++ ++struct locomospi_dev { ++ struct locomo_dev *ldev; ++ struct spi_master *master; ++ struct spi_device *sdev; ++ int card_power; ++ int clock_base; ++ int clock_div; ++ int clock; ++ unsigned long base; ++ u8 spimode; ++ wait_queue_head_t waitqueue; ++ struct workqueue_struct *workqueue; ++ struct list_head message_list; ++ spinlock_t message_lock; ++}; ++ ++ ++static irqreturn_t locomospi_cardisr(int, void*); ++static int locomospi_probe(struct locomo_dev*); ++static int locomospi_remove(struct locomo_dev*); ++static int locomospi_carddetect(void); ++static void locomospi_reg_open(void); ++static void locomospi_reg_release(void); ++static int tx(const char*, int); ++static int rx(char *, int); ++static void locomospi_power(int on); ++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state); ++static int locomospi_resume(struct locomo_dev *dev); ++static void locomospi_setcs(int high); ++#endif +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0003-enable-cpufreq-for-collie.patch b/recipes/linux/linux-2.6.28/collie/0003-enable-cpufreq-for-collie.patch new file mode 100644 index 0000000000..4ce284d52c --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0003-enable-cpufreq-for-collie.patch @@ -0,0 +1,25 @@ +From 41eabd493ccc241ccd52b77c576211759976972d Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:33:29 +0200 +Subject: [PATCH 03/23] enable cpufreq for collie + +--- + arch/arm/Kconfig | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 9722f8b..609f0fb 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1048,7 +1048,7 @@ config CPU_FREQ_SA1100 + + config CPU_FREQ_SA1110 + bool +- depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) ++ depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3 || SA1100_COLLIE) + default y + + config CPU_FREQ_INTEGRATOR +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0004-fix-dma-for-SA1100.patch b/recipes/linux/linux-2.6.28/collie/0004-fix-dma-for-SA1100.patch new file mode 100644 index 0000000000..6dbb856189 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0004-fix-dma-for-SA1100.patch @@ -0,0 +1,25 @@ +From 4f4df9e1c0c82cfd9133f52089025a8ff363977c Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:39:02 +0200 +Subject: [PATCH 04/23] fix dma for SA1100 + +--- + arch/arm/mach-sa1100/dma.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c +index f990a3e..1489d64 100644 +--- a/arch/arm/mach-sa1100/dma.c ++++ b/arch/arm/mach-sa1100/dma.c +@@ -39,7 +39,7 @@ typedef struct { + + static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS]; + +-static spinlock_t dma_list_lock; ++static DEFINE_SPINLOCK(dma_list_lock); + + + static irqreturn_t dma_irq_handler(int irq, void *dev_id) +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0005-fix-collie-keyboard-bug.patch b/recipes/linux/linux-2.6.28/collie/0005-fix-collie-keyboard-bug.patch new file mode 100644 index 0000000000..1200038de4 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0005-fix-collie-keyboard-bug.patch @@ -0,0 +1,24 @@ +From 71f6a1b91e92c89f3fcf0330c55ad41fd3315c33 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:40:32 +0200 +Subject: [PATCH 05/23] fix collie keyboard bug + +--- + drivers/input/keyboard/locomokbd.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c +index 9caed30..79e19bf 100644 +--- a/drivers/input/keyboard/locomokbd.c ++++ b/drivers/input/keyboard/locomokbd.c +@@ -265,6 +265,7 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev) + for (i = 0; i < LOCOMOKBD_NUMKEYS; i++) + set_bit(locomokbd->keycode[i], input_dev->keybit); + clear_bit(0, input_dev->keybit); ++ locomo_writel(0, locomokbd->base + LOCOMO_KSC); + + /* attempt to get the interrupt */ + err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0006-add-collie-flash-hack.patch b/recipes/linux/linux-2.6.28/collie/0006-add-collie-flash-hack.patch new file mode 100644 index 0000000000..0b987b6851 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0006-add-collie-flash-hack.patch @@ -0,0 +1,722 @@ +From 6b663bce31fb1e1a78dbca22190e98251628fd4f Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:48:10 +0200 +Subject: [PATCH 06/23] add collie flash hack + +--- + arch/arm/mach-sa1100/collie.c | 2 +- + drivers/mtd/chips/Kconfig | 8 + + drivers/mtd/chips/Makefile | 1 + + drivers/mtd/chips/sharp.c | 645 +++++++++++++++++++++++++++++++++++++++++ + drivers/mtd/maps/Kconfig | 2 +- + 5 files changed, 656 insertions(+), 2 deletions(-) + create mode 100644 drivers/mtd/chips/sharp.c + +diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c +index 8cf267f..ec673b8 100644 +--- a/arch/arm/mach-sa1100/collie.c ++++ b/arch/arm/mach-sa1100/collie.c +@@ -222,7 +222,7 @@ static void collie_flash_exit(void) + gpio_free(COLLIE_GPIO_VPEN); + } + static struct flash_platform_data collie_flash_data = { +- .map_name = "cfi_probe", ++ .map_name = "sharp", + .init = collie_flash_init, + .set_vpp = collie_set_vpp, + .exit = collie_flash_exit, +diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig +index 9408099..2dcbd03 100644 +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -241,5 +241,13 @@ config MTD_XIP + used for XIP purposes. If you're not sure what this is all about + then say N. + ++config MTD_SHARP ++ tristate "pre-CFI Sharp chip support" ++ depends on MTD ++ help ++ This option enables support for flash chips using Sharp-compatible ++ commands, including some which are not CFI-compatible and hence ++ cannot be used with the CONFIG_MTD_CFI_INTELxxx options. ++ + endmenu + +diff --git a/drivers/mtd/chips/Makefile b/drivers/mtd/chips/Makefile +index 3658241..7283c57 100644 +--- a/drivers/mtd/chips/Makefile ++++ b/drivers/mtd/chips/Makefile +@@ -12,4 +12,5 @@ obj-$(CONFIG_MTD_GEN_PROBE) += gen_probe.o + obj-$(CONFIG_MTD_JEDECPROBE) += jedec_probe.o + obj-$(CONFIG_MTD_RAM) += map_ram.o + obj-$(CONFIG_MTD_ROM) += map_rom.o ++obj-$(CONFIG_MTD_SHARP) += sharp.o + obj-$(CONFIG_MTD_ABSENT) += map_absent.o +diff --git a/drivers/mtd/chips/sharp.c b/drivers/mtd/chips/sharp.c +new file mode 100644 +index 0000000..046b964 +--- /dev/null ++++ b/drivers/mtd/chips/sharp.c +@@ -0,0 +1,645 @@ ++/* ++ * MTD chip driver for pre-CFI Sharp flash chips ++ * ++ * Copyright 2000,2001 David A. Schleef <ds@schleef.org> ++ * 2000,2001 Lineo, Inc. ++ * ++ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $ ++ * ++ * Devices supported: ++ * LH28F016SCT Symmetrical block flash memory, 2Mx8 ++ * LH28F008SCT Symmetrical block flash memory, 1Mx8 ++ * ++ * Documentation: ++ * http://www.sharpmeg.com/datasheets/memic/flashcmp/ ++ * http://www.sharpmeg.com/datasheets/memic/flashcmp/01symf/16m/016sctl9.pdf ++ * 016sctl9.pdf ++ * ++ * Limitations: ++ * This driver only supports 4x1 arrangement of chips. ++ * Not tested on anything but PowerPC. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/sched.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/cfi.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++ ++#define CMD_RESET 0xffffffff ++#define CMD_READ_ID 0x90909090 ++#define CMD_READ_STATUS 0x70707070 ++#define CMD_CLEAR_STATUS 0x50505050 ++#define CMD_BLOCK_ERASE_1 0x20202020 ++#define CMD_BLOCK_ERASE_2 0xd0d0d0d0 ++#define CMD_BYTE_WRITE 0x40404040 ++#define CMD_SUSPEND 0xb0b0b0b0 ++#define CMD_RESUME 0xd0d0d0d0 ++#define CMD_SET_BLOCK_LOCK_1 0x60606060 ++#define CMD_SET_BLOCK_LOCK_2 0x01010101 ++#define CMD_SET_MASTER_LOCK_1 0x60606060 ++#define CMD_SET_MASTER_LOCK_2 0xf1f1f1f1 ++#define CMD_CLEAR_BLOCK_LOCKS_1 0x60606060 ++#define CMD_CLEAR_BLOCK_LOCKS_2 0xd0d0d0d0 ++ ++#define SR_READY 0x80808080 // 1 = ready ++#define SR_ERASE_SUSPEND 0x40404040 // 1 = block erase suspended ++#define SR_ERROR_ERASE 0x20202020 // 1 = error in block erase or clear lock bits ++#define SR_ERROR_WRITE 0x10101010 // 1 = error in byte write or set lock bit ++#define SR_VPP 0x08080808 // 1 = Vpp is low ++#define SR_WRITE_SUSPEND 0x04040404 // 1 = byte write suspended ++#define SR_PROTECT 0x02020202 // 1 = lock bit set ++#define SR_RESERVED 0x01010101 ++ ++#define SR_ERRORS (SR_ERROR_ERASE|SR_ERROR_WRITE|SR_VPP|SR_PROTECT) ++ ++#define BLOCK_MASK 0xfffe0000 ++ ++/* Configuration options */ ++ ++#define AUTOUNLOCK /* automatically unlocks blocks before erasing */ ++ ++static struct mtd_info *sharp_probe(struct map_info *); ++ ++static int sharp_probe_map(struct map_info *map, struct mtd_info *mtd); ++ ++static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, u_char *buf); ++static int sharp_write(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, const u_char *buf); ++static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr); ++static void sharp_sync(struct mtd_info *mtd); ++static int sharp_suspend(struct mtd_info *mtd); ++static void sharp_resume(struct mtd_info *mtd); ++static void sharp_destroy(struct mtd_info *mtd); ++ ++static int sharp_write_oneword(struct map_info *map, struct flchip *chip, ++ unsigned long adr, __u32 datum); ++static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip, ++ unsigned long adr); ++#ifdef AUTOUNLOCK ++static inline void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip, ++ unsigned long adr); ++#endif ++ ++ ++struct sharp_info{ ++ struct flchip *chip; ++ int bogus; ++ int chipshift; ++ int numchips; ++ struct flchip chips[1]; ++}; ++ ++static void sharp_destroy(struct mtd_info *mtd); ++ ++static struct mtd_chip_driver sharp_chipdrv = { ++ .probe = sharp_probe, ++ .destroy = sharp_destroy, ++ .name = "sharp", ++ .module = THIS_MODULE ++}; ++ ++static void sharp_udelay(unsigned long i) { ++ if (in_interrupt()) { ++ udelay(i); ++ } else { ++ schedule(); ++ } ++} ++ ++static struct mtd_info *sharp_probe(struct map_info *map) ++{ ++ struct mtd_info *mtd = NULL; ++ struct sharp_info *sharp = NULL; ++ int width; ++ ++ mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); ++ if(!mtd) ++ return NULL; ++ ++ sharp = kzalloc(sizeof(*sharp), GFP_KERNEL); ++ if(!sharp) { ++ kfree(mtd); ++ return NULL; ++ } ++ ++ width = sharp_probe_map(map,mtd); ++ if(!width){ ++ kfree(mtd); ++ kfree(sharp); ++ return NULL; ++ } ++ ++ mtd->priv = map; ++ mtd->type = MTD_NORFLASH; ++ mtd->erase = sharp_erase; ++ mtd->read = sharp_read; ++ mtd->write = sharp_write; ++ mtd->sync = sharp_sync; ++ mtd->suspend = sharp_suspend; ++ mtd->resume = sharp_resume; ++ mtd->flags = MTD_CAP_NORFLASH; ++ mtd->writesize = 1; ++ mtd->name = map->name; ++ ++ sharp->chipshift = 24; ++ sharp->numchips = 1; ++ sharp->chips[0].start = 0; ++ sharp->chips[0].state = FL_READY; ++ sharp->chips[0].mutex = &sharp->chips[0]._spinlock; ++ sharp->chips[0].word_write_time = 0; ++ init_waitqueue_head(&sharp->chips[0].wq); ++ spin_lock_init(&sharp->chips[0]._spinlock); ++ ++ map->fldrv = &sharp_chipdrv; ++ map->fldrv_priv = sharp; ++ ++ __module_get(THIS_MODULE); ++ return mtd; ++} ++ ++static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr) ++{ ++ map_word map_cmd; ++ map_cmd.x[0] = cmd; ++ map_write(map, map_cmd, adr); ++} ++ ++static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd) ++{ ++ map_word tmp, read0, read4; ++ unsigned long base = 0; ++ int width = 4; ++ ++ tmp = map_read(map, base+0); ++ ++ sharp_send_cmd(map, CMD_READ_ID, base+0); ++ ++ read0 = map_read(map, base+0); ++ read4 = map_read(map, base+4); ++ if (read0.x[0] == 0x00b000b0) { ++ printk("Sharp chip, %lx, %lx, width = %d\n", read0.x[0], read4.x[0], width); ++ /* Prints b000b0, b000b0, width = 4 on collie */ ++ switch(read4.x[0]){ ++ case 0xaaaaaaaa: ++ case 0xa0a0a0a0: ++ /* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/ ++ /* a0 - LH28F016SCT-Z4 2Mx8, 32 64k blocks*/ ++ mtd->erasesize = 0x10000 * width; ++ mtd->size = 0x200000 * width; ++ return width; ++ case 0xa6a6a6a6: ++ /* a6 - LH28F008SCT-L12 1Mx8, 16 64k blocks*/ ++ /* a6 - LH28F008SCR-L85 1Mx8, 16 64k blocks*/ ++ mtd->erasesize = 0x10000 * width; ++ mtd->size = 0x100000 * width; ++ return width; ++ case 0x00b000b0: ++ /* a6 - LH28F640BFHE 8 64k * 2 chip blocks*/ ++ mtd->erasesize = 0x10000 * width / 2; ++ mtd->size = 0x800000 * width / 2; ++ return width; ++ default: ++ printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n", ++ read0.x[0], read4.x[0]); ++ } ++ } else if ((map_read(map, base+0).x[0] == CMD_READ_ID)){ ++ /* RAM, probably */ ++ printk("Looks like RAM\n"); ++ map_write(map, tmp, base+0); ++ }else{ ++ printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n", ++ read0.x[0], read4.x[0]); ++ } ++ ++ return 0; ++} ++ ++/* This function returns with the chip->mutex lock held. */ ++static int sharp_wait(struct map_info *map, struct flchip *chip) ++{ ++ map_word status; ++ unsigned long timeo = jiffies + HZ; ++ DECLARE_WAITQUEUE(wait, current); ++ int adr = 0; ++ ++retry: ++ spin_lock_bh(chip->mutex); ++ ++ switch (chip->state) { ++ case FL_READY: ++ sharp_send_cmd(map, CMD_READ_STATUS, adr); ++ chip->state = FL_STATUS; ++ case FL_STATUS: ++ status = map_read(map, adr); ++ if ((status.x[0] & SR_READY) == SR_READY) ++ break; ++ spin_unlock_bh(chip->mutex); ++ if (time_after(jiffies, timeo)) { ++ printk("Waiting for chip to be ready timed out in erase\n"); ++ return -EIO; ++ } ++ sharp_udelay(1); ++ goto retry; ++ default: ++ set_current_state(TASK_INTERRUPTIBLE); ++ add_wait_queue(&chip->wq, &wait); ++ ++ spin_unlock_bh(chip->mutex); ++ ++ sharp_udelay(1); ++ ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&chip->wq, &wait); ++ ++ if(signal_pending(current)) ++ return -EINTR; ++ ++ timeo = jiffies + HZ; ++ ++ goto retry; ++ } ++ ++ sharp_send_cmd(map, CMD_RESET, adr); ++ ++ chip->state = FL_READY; ++ ++ return 0; ++} ++ ++static void sharp_release(struct flchip *chip) ++{ ++ wake_up(&chip->wq); ++ spin_unlock_bh(chip->mutex); ++} ++ ++static int sharp_read(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, u_char *buf) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ int chipnum; ++ int ret = 0; ++ int ofs = 0; ++ ++ chipnum = (from >> sharp->chipshift); ++ ofs = from & ((1 << sharp->chipshift)-1); ++ ++ *retlen = 0; ++ ++ while(len){ ++ unsigned long thislen; ++ ++ if(chipnum>=sharp->numchips) ++ break; ++ ++ thislen = len; ++ if(ofs+thislen >= (1<<sharp->chipshift)) ++ thislen = (1<<sharp->chipshift) - ofs; ++ ++ ret = sharp_wait(map,&sharp->chips[chipnum]); ++ if(ret<0) ++ break; ++ ++ map_copy_from(map,buf,ofs,thislen); ++ ++ sharp_release(&sharp->chips[chipnum]); ++ ++ *retlen += thislen; ++ len -= thislen; ++ buf += thislen; ++ ++ ofs = 0; ++ chipnum++; ++ } ++ return ret; ++} ++ ++static int sharp_write(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const u_char *buf) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ int ret = 0; ++ int i,j; ++ int chipnum; ++ unsigned long ofs; ++ union { u32 l; unsigned char uc[4]; } tbuf; ++ ++ *retlen = 0; ++ ++ while(len){ ++ tbuf.l = 0xffffffff; ++ chipnum = to >> sharp->chipshift; ++ ofs = to & ((1<<sharp->chipshift)-1); ++ ++ j=0; ++ for(i=ofs&3;i<4 && len;i++){ ++ tbuf.uc[i] = *buf; ++ buf++; ++ to++; ++ len--; ++ j++; ++ } ++ sharp_write_oneword(map, &sharp->chips[chipnum], ofs&~3, tbuf.l); ++ if(ret<0) ++ return ret; ++ (*retlen)+=j; ++ } ++ ++ return 0; ++} ++ ++static int sharp_write_oneword(struct map_info *map, struct flchip *chip, ++ unsigned long adr, __u32 datum) ++{ ++ int ret; ++ int try; ++ int i; ++ map_word data, status; ++ ++ status.x[0] = 0; ++ ret = sharp_wait(map,chip); ++ if (ret < 0) ++ return ret; ++ ++ for (try=0; try<10; try++) { ++ long timeo; ++ ++ sharp_send_cmd(map, CMD_BYTE_WRITE, adr); ++ /* cpu_to_le32 -> hack to fix the writel be->le conversion */ ++ data.x[0] = cpu_to_le32(datum); ++ map_write(map, data, adr); ++ ++ chip->state = FL_WRITING; ++ timeo = jiffies + (HZ/2); ++ ++ sharp_send_cmd(map, CMD_READ_STATUS, adr); ++ for(i=0;i<100;i++){ ++ status = map_read(map, adr); ++ if((status.x[0] & SR_READY) == SR_READY) ++ break; ++ } ++#ifdef AUTOUNLOCK ++ if (status.x[0] & SR_PROTECT) { /* lock block */ ++ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); ++ sharp_unlock_oneblock(map,chip,adr); ++ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); ++ sharp_send_cmd(map, CMD_RESET, adr); ++ continue; ++ } ++#endif ++ if(i==100){ ++ printk("sharp: timed out writing\n"); ++ } ++ ++ if (!(status.x[0] & SR_ERRORS)) ++ break; ++ ++ printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]); ++ ++ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); ++ } ++ sharp_send_cmd(map, CMD_RESET, adr); ++ chip->state = FL_READY; ++ ++ sharp_release(chip); ++ ++ return 0; ++} ++ ++static int sharp_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ unsigned long adr,len; ++ int chipnum, ret=0; ++ ++ if(instr->addr & (mtd->erasesize - 1)) ++ return -EINVAL; ++ if(instr->len & (mtd->erasesize - 1)) ++ return -EINVAL; ++ if(instr->len + instr->addr > mtd->size) ++ return -EINVAL; ++ ++ chipnum = instr->addr >> sharp->chipshift; ++ adr = instr->addr & ((1<<sharp->chipshift)-1); ++ len = instr->len; ++ ++ while(len){ ++ ret = sharp_erase_oneblock(map, &sharp->chips[chipnum], adr); ++ if(ret)return ret; ++ ++ if (adr >= 0xfe0000) { ++ adr += mtd->erasesize / 8; ++ len -= mtd->erasesize / 8; ++ } else { ++ adr += mtd->erasesize; ++ len -= mtd->erasesize; ++ } ++ if(adr >> sharp->chipshift){ ++ adr = 0; ++ chipnum++; ++ if(chipnum>=sharp->numchips) ++ break; ++ } ++ } ++ ++ instr->state = MTD_ERASE_DONE; ++ mtd_erase_callback(instr); ++ ++ return 0; ++} ++ ++static inline int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip, ++ unsigned long adr) ++{ ++ int ret; ++ unsigned long timeo; ++ map_word status; ++ DECLARE_WAITQUEUE(wait, current); ++ ++ sharp_send_cmd(map, CMD_READ_STATUS, adr); ++ status = map_read(map, adr); ++ ++ timeo = jiffies + HZ * 10; ++ ++ while (time_before(jiffies, timeo)) { ++ sharp_send_cmd(map, CMD_READ_STATUS, adr); ++ status = map_read(map, adr); ++ if ((status.x[0] & SR_READY) == SR_READY) { ++ ret = 0; ++ goto out; ++ } ++ set_current_state(TASK_INTERRUPTIBLE); ++ add_wait_queue(&chip->wq, &wait); ++ ++ spin_unlock_bh(chip->mutex); ++ ++ schedule_timeout(1); ++ schedule(); ++ ++ spin_lock_bh(chip->mutex); ++ ++ remove_wait_queue(&chip->wq, &wait); ++ set_current_state(TASK_RUNNING); ++ } ++ ret = -ETIME; ++out: ++ return ret; ++} ++ ++static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip, ++ unsigned long adr) ++{ ++ int ret; ++ map_word status; ++ ++ ret = sharp_wait(map,chip); ++ if (ret < 0) ++ return ret; ++ ++#ifdef AUTOUNLOCK ++ /* This seems like a good place to do an unlock */ ++ sharp_unlock_oneblock(map,chip,adr); ++#endif ++ ++ sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr); ++ sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr); ++ ++ chip->state = FL_ERASING; ++ ++ ret = sharp_do_wait_for_ready(map,chip,adr); ++ if(ret<0) { ++ spin_unlock_bh(chip->mutex); ++ return ret; ++ } ++ ++ sharp_send_cmd(map, CMD_READ_STATUS, adr); ++ status = map_read(map, adr); ++ ++ if (!(status.x[0] & SR_ERRORS)) { ++ sharp_send_cmd(map, CMD_RESET, adr); ++ chip->state = FL_READY; ++ spin_unlock_bh(chip->mutex); ++ return 0; ++ } ++ ++ printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]); ++ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); ++ ++ sharp_release(chip); ++ ++ return -EIO; ++} ++ ++#ifdef AUTOUNLOCK ++static inline void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip, ++ unsigned long adr) ++{ ++ map_word status; ++ ++ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr & BLOCK_MASK); ++ sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr & BLOCK_MASK); ++ ++ sharp_do_wait_for_ready(map,chip,adr); ++ ++ status = map_read(map, adr); ++ ++ if (!(status.x[0] & SR_ERRORS)) { ++ sharp_send_cmd(map, CMD_RESET, adr); ++ chip->state = FL_READY; ++ return; ++ } ++ ++ printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]); ++ sharp_send_cmd(map, CMD_CLEAR_STATUS, adr); ++} ++#endif ++ ++static void sharp_sync(struct mtd_info *mtd) ++{ ++} ++ ++static int sharp_suspend(struct mtd_info *mtd) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ int i; ++ struct flchip *chip; ++ int ret = 0; ++ ++ for (i = 0; !ret && i < sharp->numchips; i++) { ++ chip = &sharp->chips[i]; ++ ret = sharp_wait(map,chip); ++ ++ if (ret) { ++ ret = -EAGAIN; ++ } else { ++ chip->state = FL_PM_SUSPENDED; ++ spin_unlock_bh(chip->mutex); ++ } ++ } ++ return ret; ++} ++ ++static void sharp_resume(struct mtd_info *mtd) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ int i; ++ struct flchip *chip; ++ ++ for (i = 0; i < sharp->numchips; i++) { ++ chip = &sharp->chips[i]; ++ ++ spin_lock_bh(chip->mutex); ++ ++ if (chip->state == FL_PM_SUSPENDED) { ++ /* We need to force it back to a known state */ ++ sharp_send_cmd(map, CMD_RESET, chip->start); ++ chip->state = FL_READY; ++ wake_up(&chip->wq); ++ } ++ ++ spin_unlock_bh(chip->mutex); ++ } ++} ++ ++static void sharp_destroy(struct mtd_info *mtd) ++{ ++ struct map_info *map = mtd->priv; ++ struct sharp_info *sharp = map->fldrv_priv; ++ ++ kfree(sharp); ++} ++ ++static int __init sharp_probe_init(void) ++{ ++ printk("MTD Sharp chip driver <ds@lineo.com>\n"); ++ ++ register_mtd_chip_driver(&sharp_chipdrv); ++ ++ return 0; ++} ++ ++static void __exit sharp_probe_exit(void) ++{ ++ unregister_mtd_chip_driver(&sharp_chipdrv); ++} ++ ++module_init(sharp_probe_init); ++module_exit(sharp_probe_exit); ++ ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("David Schleef <ds@schleef.org>"); ++MODULE_DESCRIPTION("Old MTD chip driver for pre-CFI Sharp flash chips"); +diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig +index 5ea1693..d523464 100644 +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -360,7 +360,7 @@ config MTD_CDB89712 + + config MTD_SA1100 + tristate "CFI Flash device mapped on StrongARM SA11x0" +- depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS ++ depends on (MTD_CFI || MTD_SHARP) && ARCH_SA1100 && MTD_PARTITIONS + help + This enables access to the flash chips on most platforms based on + the SA1100 and SA1110, including the Assabet and the Compaq iPAQ. +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0007-hostap-workaround-for-buggy-sa1100-pcmcia-driver.patch b/recipes/linux/linux-2.6.28/collie/0007-hostap-workaround-for-buggy-sa1100-pcmcia-driver.patch new file mode 100644 index 0000000000..230bd93476 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0007-hostap-workaround-for-buggy-sa1100-pcmcia-driver.patch @@ -0,0 +1,107 @@ +From 8200a4430e1515bf4523e3651fa7c29fdebbb0fb Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:50:06 +0200 +Subject: [PATCH 07/23] hostap workaround for buggy sa1100 pcmcia driver + +--- + drivers/net/wireless/hostap/hostap_cs.c | 6 ++++-- + drivers/net/wireless/hostap/hostap_hw.c | 14 ++++++++++++-- + drivers/net/wireless/hostap/hostap_pci.c | 1 + + drivers/net/wireless/hostap/hostap_plx.c | 2 +- + 4 files changed, 18 insertions(+), 5 deletions(-) + +diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c +index 6337402..928cdf0 100644 +--- a/drivers/net/wireless/hostap/hostap_cs.c ++++ b/drivers/net/wireless/hostap/hostap_cs.c +@@ -35,7 +35,7 @@ static int ignore_cis_vcc; + module_param(ignore_cis_vcc, int, 0444); + MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry"); + +- ++int activar=0; + /* struct local_info::hw_priv */ + struct hostap_cs_priv { + dev_node_t node; +@@ -499,11 +499,13 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) + + PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); + p_dev->conf.IntType = INT_MEMORY_AND_IO; +- ++ ++ activar=0; + ret = prism2_config(p_dev); + if (ret) { + PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n"); + } ++ activar=1; + + return ret; + } +diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c +index 3153fe9..188eaee 100644 +--- a/drivers/net/wireless/hostap/hostap_hw.c ++++ b/drivers/net/wireless/hostap/hostap_hw.c +@@ -54,6 +54,7 @@ + #include "hostap.h" + #include "hostap_ap.h" + ++extern int activar; + + /* #define final_version */ + +@@ -1497,6 +1498,8 @@ static int prism2_hw_config(struct net_device *dev, int initial) + if (local->hw_downloading) + return 1; + ++ activar=1; ++ + if (prism2_hw_init(dev, initial)) { + return local->no_pri ? 0 : 1; + } +@@ -2628,8 +2631,15 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) + int events = 0; + u16 ev; + +- iface = netdev_priv(dev); +- local = iface->local; ++ ++ // Todos los parametros de entrada son correctos (no son nulos). De momento esta es la unica forma que conozco de detectar el problema. ++ if (!activar) { ++ printk("hostap_hw.c: INTERRUPT BEFORE DEVICE INIT!\n"); ++ return IRQ_HANDLED; ++ } ++ ++ iface = netdev_priv(dev); ++ local = iface->local; + + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + +diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c +index 3a874fc..df58aa3 100644 +--- a/drivers/net/wireless/hostap/hostap_pci.c ++++ b/drivers/net/wireless/hostap/hostap_pci.c +@@ -19,6 +19,7 @@ + + #include "hostap_wlan.h" + ++int activar=1; + + static char *dev_info = "hostap_pci"; + +diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c +index cbf15d7..4475174 100644 +--- a/drivers/net/wireless/hostap/hostap_plx.c ++++ b/drivers/net/wireless/hostap/hostap_plx.c +@@ -21,7 +21,7 @@ + #include <asm/io.h> + + #include "hostap_wlan.h" +- ++int activar=1; + + static char *dev_info = "hostap_plx"; + +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0008-fix-collie-suspend-hack.patch b/recipes/linux/linux-2.6.28/collie/0008-fix-collie-suspend-hack.patch new file mode 100644 index 0000000000..19557f9e18 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0008-fix-collie-suspend-hack.patch @@ -0,0 +1,70 @@ +From 8ebd75d9f4d7dcc74e18b46ed82070eec52deaa8 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:51:21 +0200 +Subject: [PATCH 08/23] fix collie suspend hack + +--- + drivers/pcmcia/pxa2xx_sharpsl.c | 2 +- + drivers/pcmcia/sa1100_generic.c | 19 ++++++++++--------- + 2 files changed, 11 insertions(+), 10 deletions(-) + +diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c +index 1cd02f5..3724395 100644 +--- a/drivers/pcmcia/pxa2xx_sharpsl.c ++++ b/drivers/pcmcia/pxa2xx_sharpsl.c +@@ -222,7 +222,7 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) + sharpsl_pcmcia_init_reset(skt); + } + +-static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = { ++static struct pcmcia_low_level sharpsl_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = sharpsl_pcmcia_hw_init, + .hw_shutdown = sharpsl_pcmcia_hw_shutdown, +diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c +index c5b2a44..eecbe8c 100644 +--- a/drivers/pcmcia/sa1100_generic.c ++++ b/drivers/pcmcia/sa1100_generic.c +@@ -81,13 +81,14 @@ static int sa11x0_drv_pcmcia_probe(struct device *dev) + return ret; + } + +-static struct device_driver sa11x0_pcmcia_driver = { +- .probe = sa11x0_drv_pcmcia_probe, +- .remove = soc_common_drv_pcmcia_remove, +- .name = "sa11x0-pcmcia", +- .bus = &platform_bus_type, +- .suspend = pcmcia_socket_dev_suspend, +- .resume = pcmcia_socket_dev_resume, ++static struct platform_driver sa11x0_pcmcia_driver = { ++ .driver = { ++ .name = "sa11x0-pcmcia", ++ .probe = sa11x0_drv_pcmcia_probe, ++ .remove = soc_common_drv_pcmcia_remove, ++ .suspend= pcmcia_socket_dev_suspend, ++ .resume = pcmcia_socket_dev_resume, ++ }, + }; + + /* sa11x0_pcmcia_init() +@@ -100,7 +101,7 @@ static struct device_driver sa11x0_pcmcia_driver = { + */ + static int __init sa11x0_pcmcia_init(void) + { +- return driver_register(&sa11x0_pcmcia_driver); ++ return platform_driver_register(&sa11x0_pcmcia_driver); + } + + /* sa11x0_pcmcia_exit() +@@ -110,7 +111,7 @@ static int __init sa11x0_pcmcia_init(void) + */ + static void __exit sa11x0_pcmcia_exit(void) + { +- driver_unregister(&sa11x0_pcmcia_driver); ++ platform_driver_unregister(&sa11x0_pcmcia_driver); + } + + MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>"); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0009-add-sa1100-usb-gadget-driver-hack.patch b/recipes/linux/linux-2.6.28/collie/0009-add-sa1100-usb-gadget-driver-hack.patch new file mode 100644 index 0000000000..bb8dd5cd63 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0009-add-sa1100-usb-gadget-driver-hack.patch @@ -0,0 +1,2629 @@ +From 923ac0a48c2a064e4639b0fa53dbd0a18d87043e Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 18:09:03 +0100 +Subject: [PATCH 09/23] add sa1100 usb gadget driver hack + +Conflicts: + + drivers/usb/gadget/Makefile +--- + arch/arm/mach-sa1100/include/mach/collie.h | 5 +- + drivers/usb/gadget/Kconfig | 14 + + drivers/usb/gadget/Makefile | 1 + + drivers/usb/gadget/sa1100_udc.c | 2447 ++++++++++++++++++++++++++++ + drivers/usb/gadget/sa1100_udc.h | 94 ++ + 5 files changed, 2558 insertions(+), 3 deletions(-) + create mode 100644 drivers/usb/gadget/sa1100_udc.c + create mode 100644 drivers/usb/gadget/sa1100_udc.h + +diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h +index 9bc5349..799c930 100644 +--- a/arch/arm/mach-sa1100/include/mach/collie.h ++++ b/arch/arm/mach-sa1100/include/mach/collie.h +@@ -23,11 +23,10 @@ + #define COLLIE_SCP_5VON SCOOP_GPCR_PA16 + #define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 + #define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7) +-#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 ++#define COLLIE_GPIO_LB_VOL_CHG (COLLIE_SCOOP_GPIO_BASE + 8) + + #define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ +- COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \ +- COLLIE_SCP_LB_VOL_CHG ) ++ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON ) + #define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ + COLLIE_SCP_CHARGE_ON ) + +diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig +index dd4cd5a..efb65ac 100644 +--- a/drivers/usb/gadget/Kconfig ++++ b/drivers/usb/gadget/Kconfig +@@ -419,6 +419,20 @@ config USB_GOKU + default USB_GADGET + select USB_GADGET_SELECTED + ++config USB_GADGET_SA1100 ++ boolean "SA1100 USB Device Port" ++ depends on ARCH_SA1100 ++ select USB_GADGET_SELECTED ++ help ++ ++ Say "y" to link the driver statically, or "m" to build a ++ dynamically linked module called "sa1100_udc" and force all ++ gadget drivers to also be dynamically linked. ++ ++config USB_SA1100 ++ tristate ++ depends on USB_GADGET_SA1100 ++ default USB_GADGET + + # + # LAST -- dummy/emulated controller +diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile +index bd4041b..5cdd0ce 100644 +--- a/drivers/usb/gadget/Makefile ++++ b/drivers/usb/gadget/Makefile +@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o + obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o + obj-$(CONFIG_USB_M66592) += m66592-udc.o + obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o ++obj-$(CONFIG_USB_SA1100) += sa1100_udc.o + + # + # USB gadget drivers +diff --git a/drivers/usb/gadget/sa1100_udc.c b/drivers/usb/gadget/sa1100_udc.c +new file mode 100644 +index 0000000..5e26a6d +--- /dev/null ++++ b/drivers/usb/gadget/sa1100_udc.c +@@ -0,0 +1,2447 @@ ++/* ++ * SA1100 USB Device Controller (UDC) driver. ++ * ++ * Copyright (C) Compaq Computer Corporation, 1998, 1999 ++ * Copyright (C) Extenex Corporation, 2001 ++ * Copyright (C) David Brownell, 2003 ++ * Copyright (C) Nick Bane, 2005, 2006, 2007 ++ * Many fragments from pxa2xx_udc.c and mach-sa1100 driver with various ++ * GPL Copyright authors incl Russel king and Nicolas Pitre ++ * Working port to 2.6.32-1 by N C Bane ++ * ++ * This file provides interrupt routing and overall coordination for the ++ * sa1100 USB endpoints: ep0, ep1out-bulk, ep2in-bulk, as well as device ++ * initialization and some parts of USB "Chapter 9" device behavior. ++ * ++ * It implements the "USB gadget controller" API, abstracting most hardware ++ * details so that drivers running on top of this API are mostly independent ++ * of hardware. A key exception is that ep0 logic needs to understand which ++ * endpoints a given controller has, and their capabilities. Also, hardware ++ * that doesn't fully support USB (like sa1100) may need workarounds in the ++ * protocols implemented by device functions. ++ * ++ * See linux/Documentation/arm/SA1100/SA1100_USB for more info, or the ++ * kerneldoc for the API exposed to gadget drivers. ++ * ++ */ ++//#define DEBUG 1 ++//#define VERBOSE 1 ++ ++//#define SA1100_USB_DEBUG ++#ifdef SA1100_USB_DEBUG ++static int sa1100_usb_debug=0; ++#endif ++ ++#define NCB_DMA_FIX ++#ifdef NCB_DMA_FIX ++// This is a clunky fix for dma alignemnt issues ++// It should probably be done better by someone more ++// steeped in DMA lore ++#include <linux/slab.h> ++#define SEND_BUFFER_SIZE 4096 /* this is probably a bit big */ ++#define RECEIVE_BUFFER_SIZE 256 /* 64 may be all that is necessary */ ++static char *send_buffer=NULL; ++static char *receive_buffer=NULL; ++#endif ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/smp_lock.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/version.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++ ++#include <asm/byteorder.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <mach/dma.h> ++#include <asm/system.h> ++#include <asm/mach-types.h> ++#include <asm/unaligned.h> ++ ++#include <linux/usb.h> ++#include <linux/usb/ch9.h> ++#include <linux/usb/gadget.h> ++ ++#if CONFIG_PROC_FS ++#include <linux/proc_fs.h> ++#endif ++ ++#if defined(CONFIG_SA1100_BALLOON) ++#include <asm/arch/balloon2.h> ++#endif ++ ++#if defined(CONFIG_SA1100_COLLIE) ++#include <linux/gpio.h> ++#include <mach/collie.h> ++#endif ++ ++#define DRIVER_VERSION __DATE__ ++ ++#define DMA_ADDR_INVALID (~(dma_addr_t)0) ++ ++ ++static const char driver_name [] = "sa1100_udc"; ++static const char driver_desc [] = "SA-1110 USB Device Controller"; ++ ++static const char ep0name [] = "ep0"; ++ ++#ifdef DEBUG ++static char *type_string (u8 bmAttributes) ++{ ++ switch ( (bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) { ++ case USB_ENDPOINT_XFER_BULK: return "bulk"; ++ //case USB_ENDPOINT_XFER_ISOC: return "iso"; ++ case USB_ENDPOINT_XFER_INT: return "intr"; ++ }; ++ return "control"; ++} ++#endif ++ ++#include <linux/dma-mapping.h> ++struct usb_stats_t { ++ unsigned long ep0_fifo_write_failures; ++ unsigned long ep0_bytes_written; ++ unsigned long ep0_fifo_read_failures; ++ unsigned long ep0_bytes_read; ++}; ++ ++struct usb_info_t { ++ dma_regs_t *dmaregs_tx, *dmaregs_rx; ++ int state; ++ unsigned char address; ++ struct usb_stats_t stats; ++}; ++ ++enum { kError=-1, kEvSuspend=0, kEvReset=1, ++ kEvResume=2, kEvAddress=3, kEvConfig=4, kEvDeConfig=5 }; ++int usbctl_next_state_on_event( int event ) { ++ return 0; ++} ++static struct usb_info_t usbd_info; ++ ++/* receiver */ ++void ep1_reset(void); ++void ep1_stall(void); ++int sa1100_usb_recv (struct usb_request *req, void (*callback) (int,int)); ++ ++/* xmitter */ ++void ep2_reset(void); ++void ep2_stall(void); ++int sa1100_usb_send (struct usb_request *req, void (*callback) (int,int)); ++ ++/* UDC register utility functions */ ++#define UDC_write(reg, val) { \ ++ int i = 10000; \ ++ do { \ ++ (reg) = (val); \ ++ if (i-- <= 0) { \ ++ printk( "%s [%d]: write %#x to %p (%#lx) failed\n", \ ++ __FUNCTION__, __LINE__, (val), &(reg), (reg)); \ ++ break; \ ++ } \ ++ } while((reg) != (val)); \ ++} ++ ++#define UDC_set(reg, val) { \ ++ int i = 10000; \ ++ do { \ ++ (reg) |= (val); \ ++ if (i-- <= 0) { \ ++ printk( "%s [%d]: set %#x of %p (%#lx) failed\n", \ ++ __FUNCTION__, __LINE__, (val), &(reg), (reg)); \ ++ break; \ ++ } \ ++ } while(!((reg) & (val))); \ ++} ++ ++#define UDC_clear(reg, val) { \ ++ int i = 10000; \ ++ do { \ ++ (reg) &= ~(val); \ ++ if (i-- <= 0) { \ ++ printk( "%s [%d]: clear %#x of %p (%#lx) failed\n", \ ++ __FUNCTION__, __LINE__, (val), &(reg), (reg)); \ ++ break; \ ++ } \ ++ } while((reg) & (val)); \ ++} ++ ++#define UDC_flip(reg, val) { \ ++ int i = 10000; \ ++ (reg) = (val); \ ++ do { \ ++ (reg) = (val); \ ++ if (i-- <= 0) { \ ++ printk( "%s [%d]: flip %#x of %p (%#lx) failed\n", \ ++ __FUNCTION__, __LINE__, (val), &(reg), (reg)); \ ++ break; \ ++ } \ ++ } while(((reg) & (val))); \ ++} ++ ++#include "sa1100_udc.h" ++ ++static struct sa1100_udc *the_controller; ++static void nuke (struct sa1100_ep *, int status); ++static void done (struct sa1100_ep *ep, struct sa1100_request *req, int status); ++static inline void ep0_idle (struct sa1100_udc *dev) ++{ ++ dev->ep0state = EP0_IDLE; ++} ++ ++// ep0 handlers ++ ++// 1 == lots of trace noise, 0 = only "important' stuff ++#define VERBOSITY 0 ++ ++#if 1 && !defined( ASSERT ) ++# define ASSERT(expr) \ ++ if(!(expr)) { \ ++ printk( "Assertion failed! %s,%s,%s,line=%d\n",\ ++ #expr,__FILE__,__FUNCTION__,__LINE__); \ ++ } ++#else ++# define ASSERT(expr) ++#endif ++ ++#if VERBOSITY ++#define PRINTKD(fmt, args...) printk( fmt , ## args) ++#else ++#define PRINTKD(fmt, args...) ++#endif ++ ++/* other subroutines */ ++unsigned int (*wrint)(void); ++void ep0_int_hndlr( void ); ++static void ep0_queue(void *buf, unsigned int req, unsigned int act); ++static void write_fifo( void ); ++static int read_fifo( struct usb_ctrlrequest * p ); ++ ++/* some voodo helpers 01Mar01ww */ ++static void set_cs_bits( __u32 set_bits ); ++static void set_de( void ); ++static void set_ipr( void ); ++static void set_ipr_and_de( void ); ++static bool clear_opr( void ); ++ ++/*************************************************************************** ++Inline Helpers ++***************************************************************************/ ++ ++/* Data extraction from usb_request_t fields */ ++enum { kTargetDevice=0, kTargetInterface=1, kTargetEndpoint=2 }; ++static inline int request_target( __u8 b ) { return (int) ( b & 0x0F); } ++ ++static inline int windex_to_ep_num( __u16 w ) { return (int) ( w & 0x000F); } ++inline int type_code_from_request( __u8 by ) { return (( by >> 4 ) & 3); } ++ ++/* following is hook for self-powered flag in GET_STATUS. Some devices ++ .. might like to override and return real info */ ++static inline bool self_powered_hook( void ) { return true; } ++ ++#if VERBOSITY ++/* "pcs" == "print control status" */ ++static inline void pcs( void ) ++{ ++ __u32 foo = Ser0UDCCS0; ++ printk( "%8.8X: %s %s %s %s\n", ++ foo, ++ foo & UDCCS0_SE ? "SE" : "", ++ foo & UDCCS0_OPR ? "OPR" : "", ++ foo & UDCCS0_IPR ? "IPR" : "", ++ foo & UDCCS0_SST ? "SST" : "" ++ ); ++} ++static inline void preq( struct usb_ctrlrequest * pReq ) ++{ ++ static char * tnames[] = { "dev", "intf", "ep", "oth" }; ++ static char * rnames[] = { "std", "class", "vendor", "???" }; ++ char * psz; ++ switch( pReq->bRequest ) { ++ case USB_REQ_GET_STATUS: psz = "get stat"; break; ++ case USB_REQ_CLEAR_FEATURE: psz = "clr feat"; break; ++ case USB_REQ_SET_FEATURE: psz = "set feat"; break; ++ case USB_REQ_SET_ADDRESS: psz = "set addr"; break; ++ case USB_REQ_GET_DESCRIPTOR: psz = "get desc"; break; ++ case USB_REQ_SET_DESCRIPTOR: psz = "set desc"; break; ++ case USB_REQ_GET_CONFIGURATION: psz = "get cfg"; break; ++ case USB_REQ_SET_CONFIGURATION: psz = "set cfg"; break; ++ case USB_REQ_GET_INTERFACE: psz = "get intf"; break; ++ case USB_REQ_SET_INTERFACE: psz = "set intf"; break; ++ default: psz = "unknown"; break; ++ } ++ printk( "- [%s: %s req to %s. dir=%s]\n", psz, ++ rnames[ (pReq->bRequestType >> 5) & 3 ], ++ tnames[ pReq->bRequestType & 3 ], ++ ( pReq->bRequestType & 0x80 ) ? "in" : "out" ); ++} ++ ++static inline void usbctl_dump_request(const char *prefix, const struct usb_ctrlrequest *req) ++{ ++ printk("%s: bRequestType=0x%02x bRequest=0x%02x " ++ "wValue=0x%04x wIndex=0x%04x wLength=0x%04x\n", ++ prefix, req->bRequestType, req->bRequest, ++ le16_to_cpu(req->wValue), le16_to_cpu(req->wIndex), ++ le16_to_cpu(req->wLength)); ++} ++#else ++static inline void pcs( void ){} ++//static inline void preq( void ){} ++static inline void preq( void *x ){} ++static inline void usbctl_dump_request(const char *prefix, const struct usb_ctrlrequest *req) {} ++#endif ++ ++/*************************************************************************** ++Globals ++***************************************************************************/ ++static const char pszMe[] = "usbep0: "; ++ ++ ++/* global write struct to keep write ++ ..state around across interrupts */ ++static struct { ++ unsigned char *p; ++ int bytes_left; ++} wr; ++ ++/*************************************************************************** ++Public Interface ++***************************************************************************/ ++ ++/* reset received from HUB (or controller just went nuts and reset by itself!) ++ so udc core has been reset, track this state here */ ++void ep0_reset(void) ++{ ++ /* reset state machine */ ++ wr.p = NULL; ++ wr.bytes_left = 0; ++ usbd_info.address=0; ++// needed? ++ Ser0UDCAR = 0; ++} ++ ++ ++/* handle interrupt for endpoint zero */ ++ ++inline void ep0_clear_write(void) { ++ wr.p = NULL; ++ wr.bytes_left = 0; ++} ++ ++/* this is a config packet parser based on that from the updated HH 2.6 udc */ ++static void ep0_read_packet(void) ++{ ++ unsigned char status_buf[2]; /* returned in GET_STATUS */ ++ struct usb_ctrlrequest req; ++ int request_type; ++ int n; ++ __u32 address; ++ __u32 in, out; ++ ++ /* reset previous count */ ++ the_controller->ep0_req_len=-1; ++ ++ /* read the setup request */ ++ n = read_fifo( &req ); ++ usbctl_dump_request("ep0_read_packet",&req); ++ ++ if ( n != sizeof( req ) ) { ++ printk( "%ssetup begin: fifo READ ERROR wanted %d bytes got %d. " ++ " Stalling out...\n", ++ pszMe, sizeof( req ), n ); ++ /* force stall, serviced out */ ++ set_cs_bits( UDCCS0_FST | UDCCS0_SO ); ++ goto sh_sb_end; ++ } ++ ++ /* Is it a standard request? (not vendor or class request) */ ++ request_type = type_code_from_request( req.bRequestType ); ++ if ( request_type != 0 ) { ++ printk( "%ssetup begin: unsupported bRequestType: %d ignored\n", ++ pszMe, request_type ); ++ set_cs_bits( UDCCS0_DE | UDCCS0_SO ); ++ goto sh_sb_end; ++ } ++ ++ /* save requested reply size */ ++ the_controller->ep0_req_len=le16_to_cpu(req.wLength); ++ PRINTKD("%s: request length is %d\n",__FUNCTION__,the_controller->ep0_req_len); ++ ++#if VERBOSITY ++ { ++ unsigned char * pdb = (unsigned char *) &req; ++ PRINTKD( "%2.2X %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X ", ++ pdb[0], pdb[1], pdb[2], pdb[3], pdb[4], pdb[5], pdb[6], pdb[7] ++ ); ++ preq( &req ); ++ } ++#endif ++ ++ /* Handle it */ ++ switch( req.bRequest ) { ++ ++ /* This first bunch have no data phase */ ++ ++ case USB_REQ_SET_ADDRESS: ++ address = (__u32) (req.wValue & 0x7F); ++ /* when SO and DE sent, UDC will enter status phase and ack, ++ ..propagating new address to udc core. Next control transfer ++ ..will be on the new address. You can't see the change in a ++ ..read back of CAR until then. (about 250us later, on my box). ++ ..The original Intel driver sets S0 and DE and code to check ++ ..that address has propagated here. I tried this, but it ++ ..would only work sometimes! The rest of the time it would ++ ..never propagate and we'd spin forever. So now I just set ++ ..it and pray... ++ */ ++ Ser0UDCAR = address; ++ usbd_info.address = address; ++ usbctl_next_state_on_event( kEvAddress ); ++ set_cs_bits( UDCCS0_SO | UDCCS0_DE ); /* no data phase */ ++ printk( "%sI have been assigned address: %d\n", pszMe, address ); ++ break; ++ ++ ++ case USB_REQ_SET_CONFIGURATION: ++ if ( req.wValue == 1 ) { ++ /* configured */ ++ if (usbctl_next_state_on_event( kEvConfig ) != kError) { ++ /* (re)set the out and in max packet sizes */ ++ PRINTKD( "%s: calling the_controller.driver->setup with SET_CONFIGURATION\n", __FUNCTION__ ); ++ the_controller->driver->setup(&the_controller->gadget, &req); ++ in = __le16_to_cpu( the_controller->ep[1].ep.maxpacket ); ++ out = __le16_to_cpu( the_controller->ep[2].ep.maxpacket ); ++ Ser0UDCOMP = ( out - 1 ); ++ Ser0UDCIMP = ( in - 1 ); ++ // we are configured ++ usbd_info.state = USB_STATE_CONFIGURED; ++ // enable rx and tx interrupts ++ Ser0UDCCR &= ~(UDCCR_RIM | UDCCR_TIM); ++ ++ printk( "%sConfigured (OMP=%8.8X IMP=%8.8X)\n", pszMe, out, in ); ++ break; ++ } ++ } else if ( req.wValue == 0 ) { ++ /* de-configured */ ++ if (usbctl_next_state_on_event( kEvDeConfig ) != kError ) ++ printk( "%sDe-Configured\n", pszMe ); ++ usbd_info.state = 0; ++ Ser0UDCCR |= UDCCR_RIM | UDCCR_TIM; ++ ep1_reset (); ++ ep2_reset (); ++ printk("%s: de-configured. Tx and Rx interrupts disabled. ep1 and ep2 reset\n",__FUNCTION__); ++ } else { ++ printk( "%ssetup phase: Unknown " ++ "\"set configuration\" data %d\n", ++ pszMe, req.wValue ); ++ } ++ set_cs_bits( UDCCS0_SO | UDCCS0_DE ); /* no data phase */ ++ break; ++ ++ case USB_REQ_CLEAR_FEATURE: ++ /* could check data length, direction...26Jan01ww */ ++ if ( req.wValue == 0 ) { /* clearing ENDPOINT_HALT/STALL */ ++ int ep = windex_to_ep_num( req.wIndex ); ++ if ( ep == 1 ) { ++ printk( "%sclear feature \"endpoint halt\" " ++ " on receiver\n", pszMe ); ++ ep1_reset(); ++ } ++ else if ( ep == 2 ) { ++ printk( "%sclear feature \"endpoint halt\" " ++ "on xmitter\n", pszMe ); ++ ep2_reset(); ++ } else { ++ printk( "%sclear feature \"endpoint halt\" " ++ "on unsupported ep # %d\n", ++ pszMe, ep ); ++ } ++ } else { ++ printk( "%sUnsupported feature selector (%d) " ++ "in clear feature. Ignored.\n" , ++ pszMe, req.wValue ); ++ } ++ set_cs_bits( UDCCS0_SO | UDCCS0_DE ); /* no data phase */ ++ break; ++ ++ case USB_REQ_SET_FEATURE: ++ if ( req.wValue == 0 ) { /* setting ENDPOINT_HALT/STALL */ ++ int ep = windex_to_ep_num( req.wValue ); ++ if ( ep == 1 ) { ++ printk( "%set feature \"endpoint halt\" " ++ "on receiver\n", pszMe ); ++ ep1_stall(); ++ } ++ else if ( ep == 2 ) { ++ printk( "%sset feature \"endpoint halt\" " ++ " on xmitter\n", pszMe ); ++ ep2_stall(); ++ } else { ++ printk( "%sset feature \"endpoint halt\" " ++ "on unsupported ep # %d\n", ++ pszMe, ep ); ++ } ++ } ++ else { ++ printk( "%sUnsupported feature selector " ++ "(%d) in set feature\n", ++ pszMe, req.wValue ); ++ } ++ set_cs_bits( UDCCS0_SO | UDCCS0_DE ); /* no data phase */ ++ break; ++ ++ /* The rest have a data phase that writes back to the host */ ++ case USB_REQ_GET_STATUS: ++ /* return status bit flags */ ++ status_buf[0] = status_buf[1] = 0; ++ n = request_target(req.bRequestType); ++ switch( n ) { ++ case kTargetDevice: ++ if ( self_powered_hook() ) ++ status_buf[0] |= 1; ++ break; ++ case kTargetInterface: ++ break; ++ case kTargetEndpoint: ++ /* return stalled bit */ ++ n = windex_to_ep_num( req.wIndex ); ++ if ( n == 1 ) ++ status_buf[0] |= (Ser0UDCCS1 & UDCCS1_FST) >> 4; ++ else if ( n == 2 ) ++ status_buf[0] |= (Ser0UDCCS2 & UDCCS2_FST) >> 5; ++ else { ++ printk( "%sUnknown endpoint (%d) " ++ "in GET_STATUS\n", pszMe, n ); ++ } ++ break; ++ default: ++ printk( "%sUnknown target (%d) in GET_STATUS\n", ++ pszMe, n ); ++ /* fall thru */ ++ break; ++ } ++ PRINTKD("%s: GET_STATUS writing %d\n",__FUNCTION__,req.wLength); ++ ep0_queue( status_buf, req.wLength, sizeof( status_buf )); ++ break; ++ case USB_REQ_GET_DESCRIPTOR: ++ PRINTKD( "%s: calling the_controller.driver->setup with GET_DESCRIPTOR\n", __FUNCTION__ ); ++ the_controller->driver->setup(&the_controller->gadget, &req); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ PRINTKD( "%s: calling the_controller.driver->setup with GET_CONFIGURATION\n", __FUNCTION__ ); ++ the_controller->driver->setup(&the_controller->gadget, &req); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ PRINTKD( "%s: calling the_controller->driver->setup with GET_INTERFACE\n", __FUNCTION__ ); ++ the_controller->driver->setup(&the_controller->gadget, &req); ++ break; ++ case USB_REQ_SET_INTERFACE: ++ PRINTKD( "%s: calling the_controller->driver->setup with SET_INTERFACE\n", __FUNCTION__ ); ++ the_controller->driver->setup(&the_controller->gadget, &req); ++ break; ++ default : ++ printk("%sunknown request 0x%x\n", pszMe, req.bRequest); ++ break; ++ } /* switch( bRequest ) */ ++ ++sh_sb_end: ++ return; ++ ++} ++ ++void ep0_int_hndlr(void) ++{ ++ u32 cs_reg_in; ++ ++ pcs(); ++ ++ cs_reg_in = Ser0UDCCS0; ++ ++ /* ++ * If "setup end" has been set, the usb controller has terminated ++ * a setup transaction before we set DE. This happens during ++ * enumeration with some hosts. For example, the host will ask for ++ * our device descriptor and specify a return of 64 bytes. When we ++ * hand back the first 8, the host will know our max packet size ++ * and turn around and issue a new setup immediately. This causes ++ * the UDC to auto-ack the new setup and set SE. We must then ++ * "unload" (process) the new setup, which is what will happen ++ * after this preamble is finished executing. ++ */ ++ if (cs_reg_in & UDCCS0_SE) { ++ PRINTKD("UDC: early termination of setup\n"); ++ ++ /* ++ * Clear setup end ++ */ ++ set_cs_bits(UDCCS0_SSE); ++ ++ /* ++ * Clear any pending write. ++ */ ++ ep0_clear_write(); ++ } ++ ++ /* ++ * UDC sent a stall due to a protocol violation. ++ */ ++ if (cs_reg_in & UDCCS0_SST) { ++ PRINTKD("UDC: write_preamble: UDC sent stall\n"); ++ ++ /* ++ * Clear sent stall ++ */ ++ set_cs_bits(UDCCS0_SST); ++ ++ /* ++ * Clear any pending write. ++ */ ++ ep0_clear_write(); ++ } ++ ++ switch (cs_reg_in & (UDCCS0_OPR | UDCCS0_IPR)) { ++ case UDCCS0_OPR | UDCCS0_IPR: ++ PRINTKD("UDC: write_preamble: see OPR. Stopping write to " ++ "handle new SETUP\n"); ++ ++ /* ++ * very rarely, you can get OPR and ++ * leftover IPR. Try to clear ++ */ ++ UDC_clear(Ser0UDCCS0, UDCCS0_IPR); ++ ++ /* ++ * Clear any pending write. ++ */ ++ ep0_clear_write(); ++ ++ /*FALLTHROUGH*/ ++ case UDCCS0_OPR: ++ /* ++ * A new setup request is pending. Handle ++ * it. Note that we don't try to read a ++ * packet if SE was set and OPR is clear. ++ */ ++ ep0_read_packet(); ++ break; ++ ++ case 0: ++ // if data pending ... ++ if (wr.p) { ++ unsigned int cs_bits = 0; ++ if (wr.bytes_left != 0) { ++ /* ++ * More data to go ++ */ ++ write_fifo(); ++ // packet ready ++ cs_bits |= UDCCS0_IPR; ++ } ++ ++ if (wr.bytes_left == 0) { ++ /* ++ * All data sent. ++ */ ++ cs_bits |= wrint(); ++ // a null packet may be following ++ if (!wrint) ++ ep0_clear_write(); ++ } ++ set_cs_bits(cs_bits); ++ } ++ else ++ PRINTKD("%s: No data - probably an ACK\n",__FUNCTION__); ++ break; ++ ++ case UDCCS0_IPR: ++ PRINTKD("UDC: IPR set, not writing\n"); ++ break; ++ } ++ ++ pcs(); ++ PRINTKD( "-end-\n" ); ++} ++ ++static unsigned int ep0_sh_write_data(void) ++{ ++ /* ++ * If bytes left is zero, we are coming in on the ++ * interrupt after the last packet went out. And ++ * we know we don't have to empty packet this ++ * transfer so just set DE and we are done ++ */ ++ PRINTKD("UDC: normal packet ended\n"); ++ wrint=NULL; ++ return UDCCS0_DE; ++} ++ ++static unsigned int ep0_sh_write_with_empty_packet(void) ++{ ++ /* ++ * If bytes left is zero, we are coming in on the ++ * interrupt after the last packet went out. ++ * We must do short packet suff, so set DE and IPR ++ */ ++ PRINTKD("UDC: short packet sent\n"); ++ wrint=NULL; ++ return UDCCS0_IPR | UDCCS0_DE; ++} ++ ++static unsigned int ep0_sh_write_data_then_empty_packet(void) ++{ ++ PRINTKD("UDC: last packet full. Send empty packet next\n"); ++ wrint=ep0_sh_write_with_empty_packet; ++ return 0; ++} ++ ++static void ep0_queue(void *buf, unsigned int len, unsigned int req_len) ++{ ++ __u32 cs_reg_bits = UDCCS0_IPR; ++ ++ PRINTKD("a=%d r=%d\n", len, req_len); ++ ++ if (len == 0) { ++ // no output packet to wait for ++ PRINTKD("%s: zero byte packet being queued. Setting DE and OPR end exiting\n",__FUNCTION__); ++ set_cs_bits(UDCCS0_DE | UDCCS0_SO); ++ return; ++ } ++ ++ /* ++ * thou shalt not enter data phase until ++ * Out Packet Ready is clear ++ */ ++ if (!clear_opr()) { ++ printk("UDC: SO did not clear OPR\n"); ++ set_cs_bits(UDCCS0_DE | UDCCS0_SO); ++ return; ++ } ++ ++ // note data to xmit stored ++ wr.p=buf; ++ wr.bytes_left=min(len, req_len); ++ ++ // write the first block ++ write_fifo(); ++ ++ // done already? ++ if (wr.bytes_left == 0) { ++ /* ++ * out in one, so data end ++ */ ++ cs_reg_bits |= UDCCS0_DE; ++ ep0_clear_write(); ++ // rest is a shorter than expected reply? ++ } else if (len < req_len) { ++ /* ++ * we are going to short-change host ++ * so need nul to not stall ++ */ ++ if (len % 8) { ++ PRINTKD("%s: %d more to go ending in a short packet.\n",__FUNCTION__,wr.bytes_left); ++ wrint=ep0_sh_write_with_empty_packet; ++ } ++ // unless we are on a packet boundary. Then send full packet plus null packet. ++ else { ++ PRINTKD("%s: %d more to go then add empty packet.\n",__FUNCTION__,wr.bytes_left); ++ wrint=ep0_sh_write_data_then_empty_packet; ++ } ++ } else { ++ /* ++ * we have as much or more than requested ++ */ ++ PRINTKD("%s: %d more to go.\n",__FUNCTION__,wr.bytes_left); ++ wrint=ep0_sh_write_data; ++ } ++ ++ /* ++ * note: IPR was set uncondtionally at start of routine ++ */ ++ set_cs_bits(cs_reg_bits); ++} ++ ++/* ++ * write_fifo() ++ * Stick bytes in the 8 bytes endpoint zero FIFO. ++ * This version uses a variety of tricks to make sure the bytes ++ * are written correctly. 1. The count register is checked to ++ * see if the byte went in, and the write is attempted again ++ * if not. 2. An overall counter is used to break out so we ++ * don't hang in those (rare) cases where the UDC reverses ++ * direction of the FIFO underneath us without notification ++ * (in response to host aborting a setup transaction early). ++ * ++ */ ++static void write_fifo( void ) ++{ ++ int bytes_this_time = min(wr.bytes_left, 8); ++ int bytes_written = 0; ++ ++ PRINTKD( "WF=%d: ", bytes_this_time ); ++ ++ while( bytes_this_time-- ) { ++ unsigned int cwc; ++ int i; ++ PRINTKD( "%2.2X ", *wr.p ); ++ cwc = Ser0UDCWC & 15; ++ i = 10; ++ do { ++ Ser0UDCD0 = *wr.p; ++ udelay( 20 ); /* voodo 28Feb01ww */ ++ } while( (Ser0UDCWC &15) == cwc && --i ); ++ ++ if ( i == 0 ) { ++ printk( "%swrite_fifo: write failure\n", pszMe ); ++ usbd_info.stats.ep0_fifo_write_failures++; ++ } ++ ++ wr.p++; ++ bytes_written++; ++ } ++ wr.bytes_left -= bytes_written; ++ ++ /* following propagation voodo so maybe caller writing IPR in ++ ..a moment might actually get it to stick 28Feb01ww */ ++ udelay( 300 ); ++ ++ usbd_info.stats.ep0_bytes_written += bytes_written; ++ PRINTKD( "L=%d WCR=%8.8lX\n", wr.bytes_left, Ser0UDCWC ); ++} ++/* ++ * read_fifo() ++ * Read 1-8 bytes out of FIFO and put in request. ++ * Called to do the initial read of setup requests ++ * from the host. Return number of bytes read. ++ * ++ * Like write fifo above, this driver uses multiple ++ * reads checked agains the count register with an ++ * overall timeout. ++ * ++ */ ++static int ++read_fifo( struct usb_ctrlrequest * request ) ++{ ++ int bytes_read = 0; ++ int fifo_count; ++ ++ unsigned char * pOut = (unsigned char*) request; ++ ++ fifo_count = ( Ser0UDCWC & 0xFF ); ++ ++ ASSERT( fifo_count <= 8 ); ++ PRINTKD( "RF=%d ", fifo_count ); ++ ++ while( fifo_count-- ) { ++ unsigned int cwc; ++ int i; ++ ++ cwc = Ser0UDCWC & 15; ++ ++ i = 10; ++ do { ++ *pOut = (unsigned char) Ser0UDCD0; ++ udelay( 20 ); ++ } while( ( Ser0UDCWC & 15 ) == cwc && --i ); ++ ++ if ( i == 0 ) { ++ printk( "%sread_fifo(): read failure\n", pszMe ); ++ usbd_info.stats.ep0_fifo_read_failures++; ++ } ++ pOut++; ++ bytes_read++; ++ } ++ ++ PRINTKD( "fc=%d\n", bytes_read ); ++ usbd_info.stats.ep0_bytes_read++; ++ return bytes_read; ++} ++ ++/* some voodo I am adding, since the vanilla macros just aren't doing it 1Mar01ww */ ++ ++#define ABORT_BITS ( UDCCS0_SST | UDCCS0_SE ) ++#define OK_TO_WRITE (!( Ser0UDCCS0 & ABORT_BITS )) ++#define BOTH_BITS (UDCCS0_IPR | UDCCS0_DE) ++ ++static void set_cs_bits( __u32 bits ) ++{ ++ if ( bits & ( UDCCS0_SO | UDCCS0_SSE | UDCCS0_FST | UDCCS0_SST) ) ++ Ser0UDCCS0 = bits; ++ else if ( (bits & BOTH_BITS) == BOTH_BITS ) ++ set_ipr_and_de(); ++ else if ( bits & UDCCS0_IPR ) ++ set_ipr(); ++ else if ( bits & UDCCS0_DE ) ++ set_de(); ++} ++ ++static void set_de( void ) ++{ ++ int i = 1; ++ while( 1 ) { ++ if ( OK_TO_WRITE ) { ++ Ser0UDCCS0 |= UDCCS0_DE; ++ } else { ++ PRINTKD( "%sQuitting set DE because SST or SE set\n", pszMe ); ++ break; ++ } ++ if ( Ser0UDCCS0 & UDCCS0_DE ) ++ break; ++ udelay( i ); ++ if ( ++i == 50 ) { ++ printk( "%sDangnabbbit! Cannot set DE! (DE=%8.8X CCS0=%8.8lX)\n", ++ pszMe, UDCCS0_DE, Ser0UDCCS0 ); ++ break; ++ } ++ } ++} ++ ++static void set_ipr( void ) ++{ ++ int i = 1; ++ while( 1 ) { ++ if ( OK_TO_WRITE ) { ++ Ser0UDCCS0 |= UDCCS0_IPR; ++ } else { ++ PRINTKD( "%sQuitting set IPR because SST or SE set\n", pszMe ); ++ break; ++ } ++ if ( Ser0UDCCS0 & UDCCS0_IPR ) ++ break; ++ udelay( i ); ++ if ( ++i == 50 ) { ++ printk( "%sDangnabbbit! Cannot set IPR! (IPR=%8.8X CCS0=%8.8lX)\n", ++ pszMe, UDCCS0_IPR, Ser0UDCCS0 ); ++ break; ++ } ++ } ++} ++ ++static void set_ipr_and_de( void ) ++{ ++ int i = 1; ++ while( 1 ) { ++ if ( OK_TO_WRITE ) { ++ Ser0UDCCS0 |= BOTH_BITS; ++ } else { ++ PRINTKD( "%sQuitting set IPR/DE because SST or SE set\n", pszMe ); ++ break; ++ } ++ if ( (Ser0UDCCS0 & BOTH_BITS) == BOTH_BITS) ++ break; ++ udelay( i ); ++ if ( ++i == 50 ) { ++ printk( "%sDangnabbbit! Cannot set DE/IPR! (DE=%8.8X IPR=%8.8X CCS0=%8.8lX)\n", ++ pszMe, UDCCS0_DE, UDCCS0_IPR, Ser0UDCCS0 ); ++ break; ++ } ++ } ++} ++ ++static bool clear_opr( void ) ++{ ++ int i = 10000; ++ bool is_clear; ++ do { ++ Ser0UDCCS0 = UDCCS0_SO; ++ is_clear = ! ( Ser0UDCCS0 & UDCCS0_OPR ); ++ if ( i-- <= 0 ) { ++ printk( "%sclear_opr(): failed\n", pszMe ); ++ break; ++ } ++ } while( ! is_clear ); ++ return is_clear; ++} ++ ++ ++ ++// ep1 handlers ++ ++static char *ep1_buf; ++static int ep1_len; ++static void (*ep1_callback)(int flag, int size); ++static char *ep1_curdmabuf; ++static dma_addr_t ep1_curdmapos; ++static int ep1_curdmalen; ++static int ep1_remain; ++static int ep1_used; ++ ++static dma_regs_t *dmaregs_rx = NULL; ++static int rx_pktsize; ++ ++static int naking; ++ ++static void ++ep1_start(void) ++{ ++ sa1100_reset_dma(dmaregs_rx); ++ if (!ep1_curdmalen) { ++ ep1_curdmalen = rx_pktsize; ++ if (ep1_curdmalen > ep1_remain) ++ ep1_curdmalen = ep1_remain; ++ ep1_curdmapos = dma_map_single(NULL, ep1_curdmabuf, ep1_curdmalen, ++ DMA_FROM_DEVICE); ++ } ++ ++ UDC_write( Ser0UDCOMP, ep1_curdmalen-1 ); ++ ++ sa1100_start_dma(dmaregs_rx, ep1_curdmapos, ep1_curdmalen); ++ ++ if ( naking ) { ++ /* turn off NAK of OUT packets, if set */ ++ UDC_flip( Ser0UDCCS1, UDCCS1_RPC ); ++ naking = 0; ++ } ++} ++ ++static void ++ep1_done(int flag) ++{ ++ int size = ep1_len - ep1_remain; ++ ++ if (!ep1_len) ++ return; ++ if (ep1_curdmalen) ++ dma_unmap_single(NULL, ep1_curdmapos, ep1_curdmalen, ++ DMA_FROM_DEVICE); ++ ep1_len = ep1_curdmalen = 0; ++ if (ep1_callback) ++ ep1_callback(flag, size); ++} ++ ++void ++ep1_state_change_notify( int new_state ) ++{ ++ ++} ++ ++void ++ep1_stall( void ) ++{ ++ /* SET_FEATURE force stall at UDC */ ++ UDC_set( Ser0UDCCS1, UDCCS1_FST ); ++} ++ ++int ++ep1_init(dma_regs_t *dmaregs) ++{ ++ dmaregs_rx = dmaregs; ++ sa1100_reset_dma(dmaregs_rx); ++ ep1_done(-EAGAIN); ++ return 0; ++} ++ ++void ++ep1_reset(void) ++{ ++ if (dmaregs_rx) ++ sa1100_reset_dma(dmaregs_rx); ++ UDC_clear(Ser0UDCCS1, UDCCS1_FST); ++ ep1_done(-EINTR); ++} ++ ++void ep1_int_hndlr(int udcsr) ++{ ++ dma_addr_t dma_addr; ++ unsigned int len; ++ int status = Ser0UDCCS1; ++ ++ if ( naking ) printk( "%sEh? in ISR but naking = %d\n", "usbrx: ", naking ); ++ ++ if (status & UDCCS1_RPC) { ++ ++ if (!ep1_curdmalen) { ++ printk("usb_recv: RPC for non-existent buffer\n"); ++ naking=1; ++ return; ++ } ++ ++ sa1100_stop_dma(dmaregs_rx); ++ ++ if (status & UDCCS1_SST) { ++ printk("usb_recv: stall sent OMP=%ld\n", Ser0UDCOMP); ++ UDC_flip(Ser0UDCCS1, UDCCS1_SST); ++ ep1_done(-EIO); // UDC aborted current transfer, so we do ++ return; ++ } ++ ++ if (status & UDCCS1_RPE) { ++ printk("usb_recv: RPError %x\n", status); ++ UDC_flip(Ser0UDCCS1, UDCCS1_RPC); ++ ep1_done(-EIO); ++ return; ++ } ++ ++ dma_addr=sa1100_get_dma_pos(dmaregs_rx); ++ dma_unmap_single(NULL, ep1_curdmapos, ep1_curdmalen, ++ DMA_FROM_DEVICE); ++ len = dma_addr - ep1_curdmapos; ++#ifdef SA1100_USB_DEBUG ++ if (sa1100_usb_debug) { ++ int i; ++ printk("usb rx %d :\n ",len); ++ if (sa1100_usb_debug>1) { ++ for (i=0; i<len; i++) { ++ if ((i % 32)==31) ++ printk("\n "); ++ printk("%2.2x ",((char *)ep1_curdmapos)[i]); ++ } ++ } ++ printk("\n"); ++ } ++#endif ++ if (len < ep1_curdmalen) { ++ char *buf = ep1_curdmabuf + len; ++ while (Ser0UDCCS1 & UDCCS1_RNE) { ++ if (len >= ep1_curdmalen) { ++ printk("usb_recv: too much data in fifo\n"); ++ break; ++ } ++ *buf++ = Ser0UDCDR; ++ len++; ++ } ++ } else if (Ser0UDCCS1 & UDCCS1_RNE) { ++ printk("usb_recv: fifo screwed, shouldn't contain data\n"); ++ len = 0; ++ } ++ ++#if defined(NCB_DMA_FIX) ++// if (len && (ep1_buf != ep1_curdmabuf)) ++// memcpy(ep1_buf,ep1_curdmabuf,len); ++ if (len) ++ memcpy(&(((unsigned char *)ep1_buf)[ep1_used]),ep1_curdmabuf,len); ++#endif ++ ++ ep1_curdmalen = 0; /* dma unmap already done */ ++ ep1_remain -= len; ++ ep1_used += len; ++// ep1_curdmabuf += len; // use same buffer again ++ naking = 1; ++//printk("%s: received %d, %d remaining\n",__FUNCTION__,len,ep1_remain); ++ if (len && (len == rx_pktsize)) ++ ep1_start(); ++ else ++ ep1_done((len) ? 0 : -EPIPE); ++ } ++ /* else, you can get here if we are holding NAK */ ++} ++ ++int ++sa1100_usb_recv(struct usb_request *req, void (*callback)(int flag, int size)) ++{ ++ unsigned long flags; ++ char *buf=req->buf; ++ int len=req->length; ++ ++ if (ep1_len) ++ return -EBUSY; ++ ++ local_irq_save(flags); ++ ep1_buf = buf; ++ ep1_len = len; ++ ep1_callback = callback; ++ ep1_remain = len; ++ ep1_used = 0; ++#ifdef NCB_DMA_FIX ++// if (((size_t)buf)&3) ++ if (1) ++ ep1_curdmabuf = receive_buffer; ++ else ++#else ++ ep1_curdmabuf = buf; ++#endif ++ ep1_curdmalen = 0; ++ ep1_start(); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++// ep2 handlers ++ ++static char *ep2_buf; ++static int ep2_len; ++static void (*ep2_callback)(int status, int size); ++static dma_addr_t ep2_dma; ++static dma_addr_t ep2_curdmapos; ++static int ep2_curdmalen; ++static int ep2_remain; ++static dma_regs_t *dmaregs_tx = NULL; ++static int tx_pktsize; ++ ++/* device state is changing, async */ ++void ++ep2_state_change_notify( int new_state ) ++{ ++} ++ ++/* set feature stall executing, async */ ++void ++ep2_stall( void ) ++{ ++ UDC_set( Ser0UDCCS2, UDCCS2_FST ); /* force stall at UDC */ ++} ++ ++static void ++ep2_start(void) ++{ ++ if (!ep2_len) ++ return; ++ ++ ep2_curdmalen = tx_pktsize; ++ if (ep2_curdmalen > ep2_remain) ++ ep2_curdmalen = ep2_remain; ++ ++ /* must do this _before_ queue buffer.. */ ++ UDC_flip( Ser0UDCCS2,UDCCS2_TPC ); /* stop NAKing IN tokens */ ++ UDC_write( Ser0UDCIMP, ep2_curdmalen-1 ); ++ ++ Ser0UDCAR = usbd_info.address; // fighting stupid silicon bug ++ sa1100_start_dma(dmaregs_tx, ep2_curdmapos, ep2_curdmalen); ++} ++ ++static void ++ep2_done(int flag) ++{ ++ int size = ep2_len - ep2_remain; ++ if (ep2_len) { ++ dma_unmap_single(NULL, ep2_dma, ep2_len, DMA_TO_DEVICE); ++ ep2_len = 0; ++ if (ep2_callback) ++ ep2_callback(flag, size); ++ } ++} ++ ++int ep2_init(dma_regs_t *dmaregs) ++{ ++ dmaregs_tx = dmaregs; ++ sa1100_reset_dma(dmaregs_tx); ++ ep2_done(-EAGAIN); ++ return 0; ++} ++ ++void ep2_reset(void) ++{ ++ UDC_clear(Ser0UDCCS2, UDCCS2_FST); ++ if (dmaregs_tx) ++ sa1100_reset_dma(dmaregs_tx); ++ ep2_done(-EINTR); ++} ++ ++void ep2_int_hndlr(int udcsr) ++{ ++ int status = Ser0UDCCS2; ++ ++ if (Ser0UDCAR != usbd_info.address) // check for stupid silicon bug. ++ Ser0UDCAR = usbd_info.address; ++ ++ if (status & UDCCS2_TPC) { ++ ++ UDC_flip(Ser0UDCCS2, UDCCS2_SST); ++ ++ sa1100_reset_dma(dmaregs_tx); ++ ++ if (status & (UDCCS2_TPE | UDCCS2_TUR)) { ++ printk("usb_send: transmit error %x\n", status); ++ ep2_done(-EIO); ++ } else { ++ ep2_curdmapos += ep2_curdmalen; ++ ep2_remain -= ep2_curdmalen; ++ ++ if (ep2_remain != 0) ++ ep2_start(); ++ else ++ ep2_done(0); ++ } ++ } else { ++ printk("usb_send: Not TPC: UDCCS2 = %x\n", status); ++ } ++} ++ ++int ++sa1100_usb_send(struct usb_request *req, void (*callback)(int status, int size)) ++{ ++ char *buf=req->buf; ++ int len=req->length; ++ unsigned long flags; ++ ++ if (usbd_info.state != USB_STATE_CONFIGURED) { ++ PRINTKD("%s: return -ENODEV\n",__FUNCTION__); ++ return -ENODEV; ++ } ++ ++ if (ep2_len) { ++ PRINTKD("%s: return -EBUSY\n",__FUNCTION__); ++ return -EBUSY; ++ } ++ ++ local_irq_save(flags); ++#ifdef NCB_DMA_FIX ++ // if misaligned, copy to aligned buffer ++// if (((size_t)buf)&3) { ++ if (1) { ++ PRINTKD("%s: copying %d bytes to send_buffer\n",__FUNCTION__,len); ++ memcpy(send_buffer,buf,len); ++ ep2_buf = send_buffer; ++ } ++ else ++#endif ++ ep2_buf = buf; ++ ++ ep2_len = len; ++ ep2_dma = dma_map_single(NULL, ep2_buf, len,DMA_TO_DEVICE); ++ PRINTKD("%s: mapped dma to buffer(%p0\n",__FUNCTION__,buf); ++ ++ ep2_callback = callback; ++ ep2_remain = len; ++ ep2_curdmapos = ep2_dma; ++ ++ PRINTKD("%s: calling ep2_start\n",__FUNCTION__); ++ ep2_start(); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++/*-------------------------------------------------------------------------*/ ++ ++static int ++sa1100_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) ++{ ++ struct sa1100_udc *dev; ++ struct sa1100_ep *ep; ++ u32 max; ++ int type; ++ ++ ep = container_of (_ep, struct sa1100_ep, ep); ++ if (!_ep || !desc || ep->desc || _ep->name == ep0name ++ || desc->bDescriptorType != USB_DT_ENDPOINT) { ++ PRINTKD("%s: _ep = %p, desc = %p\n",__FUNCTION__,_ep,desc); ++ if (_ep && desc) ++ PRINTKD("%s: ep->desc = %p, _ep->name = %s desc->bDescriptorType = %s\n",__FUNCTION__,ep->desc,_ep->name, ++ (desc->bDescriptorType == USB_DT_ENDPOINT) ? "USB_DT_ENDPOINT":"bad!!"); ++ return -EINVAL; ++ } ++ ++ dev = ep->dev; ++ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) ++ return -ESHUTDOWN; ++ ++ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; ++ max = le16_to_cpu (desc->wMaxPacketSize); ++ switch (max) { ++ case 64: case 32: ++ /* note: maxpacket > 16 means DMA might overrun/underrun */ ++ case 16: case 8: ++ break; ++ default: ++ if (type == USB_ENDPOINT_XFER_INT && max < 64) ++ break; ++ return -EDOM; ++ } ++ ++ switch (type) { ++ case USB_ENDPOINT_XFER_BULK: ++ case USB_ENDPOINT_XFER_INT: ++ if (ep == &dev->ep[2]) { ++ if (desc->bEndpointAddress != (USB_DIR_IN|2)) { ++ PRINTKD("%s: ep[2] has invalid endpoint\n",__FUNCTION__); ++ return -EINVAL; ++ } ++ tx_pktsize = max; ++ Ser0UDCOMP = max - 1; ++ PRINTKD("%s: ep2 max packet size is %d\n",__FUNCTION__,max); ++ break; ++ } else if (ep == &dev->ep[1]) { ++ if (desc->bEndpointAddress != (USB_DIR_OUT|1)) { ++ PRINTKD("%s: ep[1] has invalid endpoint\n",__FUNCTION__); ++ return -EINVAL; ++ } ++ rx_pktsize = max; ++ Ser0UDCIMP = max - 1; ++ PRINTKD("%s: ep1 max packet size is %d\n",__FUNCTION__,max); ++ break; ++ } ++ // FALLTHROUGH ++ default: ++ PRINTKD("%s: Invalid endpoint\n",__FUNCTION__); ++ return -EINVAL; ++ } ++ ++ _ep->maxpacket = max; ++ ep->desc = desc; ++ ep->stopped = 0; ++ ++ DEBUG (dev, "enabled %s %s max %04x\n", _ep->name, ++ type_string (desc->bmAttributes), max); ++ ++ return 0; ++} ++ ++static int sa1100_disable (struct usb_ep *_ep) ++{ ++ struct sa1100_ep *ep; ++ ++ ep = container_of (_ep, struct sa1100_ep, ep); ++ if (!_ep || !ep->desc || _ep->name == ep0name) ++ return -EINVAL; ++ ++ nuke (ep, -ESHUTDOWN); ++ ++ DEBUG (ep->dev, "disabled %s\n", _ep->name); ++ ++ ep->desc = NULL; ++ ep->stopped = 1; ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++sa1100_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) ++{ ++ struct sa1100_request *req; ++ ++ if (!_ep) ++ return 0; ++ ++ req = kzalloc(sizeof *req, gfp_flags); ++ if (!req) ++ return 0; ++ ++ memset (req, 0, sizeof *req); ++ req->req.dma = DMA_ADDR_INVALID; ++ INIT_LIST_HEAD (&req->queue); ++ return &req->req; ++} ++ ++static void sa1100_free_request(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct sa1100_request *req; ++ ++ req = container_of (_req, struct sa1100_request, req); ++ WARN_ON (!list_empty (&req->queue)); ++ kfree(req); //NCB - see pxa2xx_udc ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void done(struct sa1100_ep *ep, struct sa1100_request *req, int status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ list_del_init (&req->queue); ++ ++ if (likely(req->req.status == -EINPROGRESS)) ++ req->req.status = status; ++ else ++ status = req->req.status; ++ ++ if (status && status != -ESHUTDOWN) ++ VDEBUG (ep->dev, "complete %s req %p stat %d len %u/%u\n", ++ ep->ep.name, &req->req, status, ++ req->req.actual, req->req.length); ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ req->req.complete (&ep->ep, &req->req); ++ ep->stopped = stopped; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* FIXME move away from the old non-queued api. ++ * - forces extra work on us ++ * - stores request state twice ++ * - doesn't let gadget driver handle dma mapping ++ * - status codes need mapping ++ */ ++ ++static int map_status(int status) ++{ ++ switch (status) { ++ case 0: ++ case -EIO: /* ep[12]_int_handler */ ++ return status; ++ case -EPIPE: /* ep1_int_handler */ ++ return 0; ++ // case -EAGAIN: /* ep[12]_init */ ++ // case -EINTR: /* ep[12]_reset */ ++ default: ++ return -ESHUTDOWN; ++ } ++} ++ ++static void tx_callback(int status, int size) ++{ ++ struct sa1100_ep *ep = &the_controller->ep[2]; ++ struct sa1100_request *req; ++ ++ if (list_empty (&ep->queue)) { ++ if (status != -EAGAIN) ++ DEBUG (ep->dev, "%s, bogus tx callback %d/%d\n", ++ ep->ep.name, status, size); ++ return; ++ } ++ req = list_entry (ep->queue.next, struct sa1100_request, queue); ++ req->req.actual = size; ++ done (ep, req, map_status (status)); ++ ++ if (ep->stopped || list_empty (&ep->queue)) ++ return; ++ req = list_entry (ep->queue.next, struct sa1100_request, queue); ++ sa1100_usb_send (&req->req, tx_callback); ++} ++ ++static void rx_callback (int status, int size) ++{ ++ struct sa1100_ep *ep = &the_controller->ep[1]; ++ struct sa1100_request *req; ++ ++ if (list_empty (&ep->queue)) { ++ if (status != -EAGAIN) ++ DEBUG (ep->dev, "%s, bogus tx callback %d/%d\n", ++ ep->ep.name, status, size); ++ return; ++ } ++ req = list_entry (ep->queue.next, struct sa1100_request, queue); ++ req->req.actual = size; ++ done (ep, req, map_status (status)); ++ ++ if (ep->stopped || list_empty (&ep->queue)) ++ return; ++ req = list_entry (ep->queue.next, struct sa1100_request, queue); ++ sa1100_usb_recv (&req->req, rx_callback); ++} ++ ++ ++static int ++sa1100_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) ++{ ++ struct sa1100_request *req; ++ struct sa1100_ep *ep; ++ struct sa1100_udc *dev; ++ unsigned long flags; ++ ++ req = container_of (_req, struct sa1100_request, req); ++ if (!_req || !_req->complete || !_req->buf ++ || !list_empty (&req->queue)) ++ return -EINVAL; ++ ++ ep = container_of (_ep, struct sa1100_ep, ep); ++ if (unlikely(!_ep || (!ep->desc && _ep->name != ep0name))) ++ return -EINVAL; ++ ++ dev = ep->dev; ++ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) ++ return -ESHUTDOWN; ++ ++ // handle ep0 ++ if (_ep->name == ep0name) { ++ ep0_queue( _req->buf, _req->length, dev->ep0_req_len >=0 ? dev->ep0_req_len: _req->length ); ++ return 0; ++ } ++ ++ /* sa1100 udc can't write zlps */ ++ if (ep == &dev->ep[2] && _req->length == 0) ++ return -ERANGE; ++ ++ /* the old sa1100 api doesn't use 'unsigned' for lengths */ ++ if (_req->length > INT_MAX) ++ return -ERANGE; ++ ++ VDEBUG (dev, "%s queue req %p, len %d buf %p\n", ++ _ep->name, _req, _req->length, _req->buf); ++ ++ local_irq_save (flags); ++ ++ _req->status = -EINPROGRESS; ++ _req->actual = 0; ++ ++ if (list_empty (&ep->queue) && !ep->stopped) { ++ /* FIXME this does DMA mapping wrong. caller is allowed ++ * to provide buffers that don't need mapping, but this ++ * doesn't use them. ++ */ ++ if (ep == &ep->dev->ep[2]) { ++ PRINTKD("%s: sa1100_usb_send buf %p length %d\n",__FUNCTION__,_req->buf,_req->length); ++ sa1100_usb_send (_req, tx_callback); ++ } ++ else if (ep == &ep->dev->ep[1]) { ++ PRINTKD("%s: sa1100_usb_recv buf %p length %d\n",__FUNCTION__,_req->buf,_req->length); ++ sa1100_usb_recv (_req, rx_callback); ++ } ++ /* ep0 rx/tx is handled separately */ ++ } ++ list_add_tail (&req->queue, &ep->queue); ++ ++ local_irq_restore (flags); ++ ++ return 0; ++} ++ ++/* dequeue ALL requests */ ++static void nuke (struct sa1100_ep *ep, int status) ++{ ++ struct sa1100_request *req; ++ ++ /* called with irqs blocked */ ++ while (!list_empty (&ep->queue)) { ++ req = list_entry (ep->queue.next, ++ struct sa1100_request, ++ queue); ++ done (ep, req, status); ++ } ++ if (ep == &ep->dev->ep[1]) ++ ep1_reset (); ++ else if (ep == &ep->dev->ep[2]) ++ ep2_reset (); ++} ++ ++/* dequeue JUST ONE request */ ++static int sa1100_dequeue (struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct sa1100_ep *ep; ++ struct sa1100_request *req; ++ unsigned long flags; ++ ++ ep = container_of (_ep, struct sa1100_ep, ep); ++ if (!_ep || (!ep->desc && _ep->name != ep0name) || !_req) ++ return -EINVAL; ++ ++ local_irq_save (flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ list_for_each_entry (req, &ep->queue, queue) { ++ if (&req->req == _req) ++ break; ++ } ++ if (&req->req != _req) { ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ ++ done(ep, req, -ECONNRESET); ++ ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int ++sa1100_set_halt (struct usb_ep *_ep, int value) ++{ ++ struct sa1100_ep *ep; ++ ++ ep = container_of (_ep, struct sa1100_ep, ep); ++ if (unlikely(!_ep ++ || (!ep->desc && _ep->name != ep0name)) ++ || (ep->desc->bmAttributes & 0x03) == USB_ENDPOINT_XFER_ISOC) ++ return -EINVAL; ++ if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) ++ return -ESHUTDOWN; ++ ++ VDEBUG (ep->dev, "%s %s halt\n", _ep->name, value ? "set" : "clear"); ++ ++ /* set/clear, then synch memory views with the device */ ++ if (value) { ++ if (ep == &ep->dev->ep[1]) ++ ep1_stall (); ++ else ++ ep2_stall (); ++ } else { ++ if (ep == &ep->dev->ep[1]) ++ ep1_reset (); ++ else ++ ep2_reset (); ++ } ++ ++ return 0; ++} ++ ++static struct usb_ep_ops sa1100_ep_ops = { ++ .enable = sa1100_enable, ++ .disable = sa1100_disable, ++ ++ .alloc_request = sa1100_alloc_request, ++ .free_request = sa1100_free_request, ++ ++ .queue = sa1100_queue, ++ .dequeue = sa1100_dequeue, ++ ++ .set_halt = sa1100_set_halt, ++ // .fifo_status = sa1100_fifo_status, ++ // .fifo_flush = sa1100_fifo_flush, ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int sa1100_get_frame (struct usb_gadget *_gadget) ++{ ++ return -EOPNOTSUPP; ++} ++ ++static int sa1100_wakeup (struct usb_gadget *_gadget) ++{ ++ struct sa1100_udc *dev; ++ ++ if (!_gadget) ++ return 0; ++ dev = container_of (_gadget, struct sa1100_udc, gadget); ++ ++ // FIXME ++ ++ return 0; ++} ++ ++static const struct usb_gadget_ops sa1100_ops = { ++ .get_frame = sa1100_get_frame, ++ .wakeup = sa1100_wakeup, ++ ++ // .set_selfpowered = sa1100_set_selfpowered, ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++static inline void enable_resume_mask_suspend (void) ++{ ++ int i = 0; ++ ++ while (1) { ++ Ser0UDCCR |= UDCCR_SUSIM; // mask future suspend events ++ udelay (i); ++ if ( (Ser0UDCCR & UDCCR_SUSIM) || (Ser0UDCSR & UDCSR_RSTIR)) ++ break; ++ if (++i == 50) { ++ WARN_ (&the_controller, "%s Could not set SUSIM %8.8lX\n", ++ __FUNCTION__, Ser0UDCCR); ++ break; ++ } ++ } ++ ++ i = 0; ++ while (1) { ++ Ser0UDCCR &= ~UDCCR_RESIM; ++ udelay (i); ++ if ( (Ser0UDCCR & UDCCR_RESIM) == 0 ++ || (Ser0UDCSR & UDCSR_RSTIR)) ++ break; ++ if (++i == 50) { ++ WARN_ (&the_controller, "%s Could not clear RESIM %8.8lX\n", ++ __FUNCTION__, Ser0UDCCR); ++ break; ++ } ++ } ++} ++ ++static inline void enable_suspend_mask_resume (void) ++{ ++ int i = 0; ++ while (1) { ++ Ser0UDCCR |= UDCCR_RESIM; // mask future resume events ++ udelay (i); ++ if (Ser0UDCCR & UDCCR_RESIM || (Ser0UDCSR & UDCSR_RSTIR)) ++ break; ++ if (++i == 50) { ++ WARN_ (&the_controller, "%s could not set RESIM %8.8lX\n", ++ __FUNCTION__, Ser0UDCCR); ++ break; ++ } ++ } ++ i = 0; ++ while (1) { ++ Ser0UDCCR &= ~UDCCR_SUSIM; ++ udelay (i); ++ if ( (Ser0UDCCR & UDCCR_SUSIM) == 0 ++ || (Ser0UDCSR & UDCSR_RSTIR)) ++ break; ++ if (++i == 50) { ++ WARN_ (&the_controller, "%s Could not clear SUSIM %8.8lX\n", ++ __FUNCTION__, Ser0UDCCR); ++ break; ++ } ++ } ++} ++ ++// HACK DEBUG 3Mar01ww ++// Well, maybe not, it really seems to help! 08Mar01ww ++static void core_kicker (void) ++{ ++ u32 car = Ser0UDCAR; ++ u32 imp = Ser0UDCIMP; ++ u32 omp = Ser0UDCOMP; ++ ++ UDC_set (Ser0UDCCR, UDCCR_UDD); ++ udelay (300); ++ UDC_clear (Ser0UDCCR, UDCCR_UDD); ++ ++ Ser0UDCAR = car; ++ Ser0UDCIMP = imp; ++ Ser0UDCOMP = omp; ++} ++ ++static irqreturn_t udc_int_hndlr(int irq, void *_dev) ++{ ++ struct sa1100_udc *dev = _dev; ++ u32 status = Ser0UDCSR; ++ ++ PRINTKD("%s: status = 0x%x and control = 0x%lx\n", __FUNCTION__, ++ status, Ser0UDCCR); ++ /* ReSeT Interrupt Request - UDC has been reset */ ++ if (status & UDCSR_RSTIR) { ++ PRINTKD("%s: processing UDCSR_RSTIR\n", __FUNCTION__); ++ if (usbctl_next_state_on_event(kEvReset) != kError) { ++ /* starting 20ms or so reset sequence now... */ ++ INFO (dev, "Resetting\n"); ++ ep0_reset(); // just set state to idle ++ ep1_reset(); // flush dma, clear false stall ++ ep2_reset(); // flush dma, clear false stall ++ } ++ // mask reset ints, they flood during sequence, enable ++ // suspend and resume ++ UDC_set(Ser0UDCCR, UDCCR_REM); // mask reset ++ UDC_clear(Ser0UDCCR, (UDCCR_SUSIM | UDCCR_RESIM)); // enable suspend and resume ++ UDC_flip(Ser0UDCSR, status); // clear all pending sources ++ PRINTKD("%s: setting USB_FULL_SPEED\n",__FUNCTION__); ++ dev->gadget.speed = USB_SPEED_FULL; ++ return IRQ_HANDLED; // NCB ++ } ++ ++ /* else we have done something other than reset, ++ * so be sure reset enabled ++ */ ++ UDC_clear(Ser0UDCCR, UDCCR_REM); ++ ++ /* RESume Interrupt Request */ ++ if (status & UDCSR_RESIR) { ++ struct usb_gadget_driver *driver = dev->driver; ++ ++ PRINTKD("%s: processing UDCSR_RESIR\n",__FUNCTION__); ++ if (driver->resume) ++ driver->resume (&dev->gadget); ++ core_kicker (); ++ enable_suspend_mask_resume (); ++ } ++ ++ /* SUSpend Interrupt Request */ ++ if (status & UDCSR_SUSIR) { ++ struct usb_gadget_driver *driver = dev->driver; ++ ++ PRINTKD("%s: processing UDCSR_SUSIR\n",__FUNCTION__); ++ if (driver->suspend) ++ driver->suspend (&dev->gadget); ++ enable_resume_mask_suspend (); ++ } ++ ++ UDC_flip(Ser0UDCSR, status); // clear all pending sources ++ ++ if (status & UDCSR_EIR) ++ PRINTKD("%s: processing ep0_int_hndlr\n",__FUNCTION__); ++ ep0_int_hndlr(); ++ ++ if (status & UDCSR_RIR) { ++ PRINTKD("%s: processing ep1_int_hndlr\n",__FUNCTION__); ++ ep1_int_hndlr(status); ++ } ++ if (status & UDCSR_TIR) { ++ PRINTKD("%s: processing ep2_int_hndlr\n",__FUNCTION__); ++ ep2_int_hndlr(status); ++ } ++ ++ return IRQ_HANDLED; // NCB ++} ++ ++/* soft_connect_hook () ++ * Some devices have platform-specific circuitry to make USB ++ * not seem to be plugged in, even when it is. This allows ++ * software to control when a device 'appears' on the USB bus ++ * (after Linux has booted and this driver has loaded, for ++ * example). If you have such a circuit, control it here. ++ */ ++#ifdef CONFIG_SA1100_EXTENEX1 ++static void soft_connect_hook(int enable) ++{ ++ if (machine_is_extenex1 ()) { ++ if (enable) { ++ PPDR |= PPC_USB_SOFT_CON; ++ PPSR |= PPC_USB_SOFT_CON; ++ } else { ++ PPSR &= ~PPC_USB_SOFT_CON; ++ PPDR &= ~PPC_USB_SOFT_CON; ++ } ++ } ++} ++#elif defined(CONFIG_SA1100_BALLOON) ++static void soft_connect_hook(int enable) ++{ ++ if (machine_is_balloon()) { ++ if (enable) ++ balloon_cpld_control(BALLOON_UDC_DISCONNECT, 0); ++ else ++ balloon_cpld_control(BALLOON_UDC_DISCONNECT, 1); ++ } ++} ++#elif defined(CONFIG_SA1100_COLLIE) ++static int collie_usb_init(void) ++{ ++ int rc; ++ rc = gpio_request(COLLIE_GPIO_LB_VOL_CHG, "usb enable"); ++ if (rc) ++ return rc; ++ ++ rc = gpio_direction_output(COLLIE_GPIO_LB_VOL_CHG, 1); ++ if (rc) ++ gpio_free(COLLIE_GPIO_LB_VOL_CHG); ++ ++ return rc; ++} ++ ++static void collie_set_usb(int enable) ++{ ++ gpio_set_value(COLLIE_GPIO_LB_VOL_CHG, enable); ++} ++ ++static void collie_usb_exit(void) ++{ ++ gpio_free(COLLIE_GPIO_LB_VOL_CHG); ++} ++ ++static void soft_connect_hook(int enable) ++{ ++ collie_set_usb(enable); ++} ++#else ++#define soft_connect_hook(x) do { } while (0); ++#endif ++ ++/* "function" sysfs attribute */ ++static ssize_t ++show_function(struct device *_dev, struct device_attribute *attr, char *buf) ++{ ++ struct sa1100_udc *dev = dev_get_drvdata (_dev); ++ ++ if (!dev->driver ++ || !dev->driver->function ++ || strlen(dev->driver->function) > PAGE_SIZE) ++ return 0; ++ return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); ++} ++static DEVICE_ATTR(function, S_IRUGO, show_function, NULL); ++ ++/* disable the UDC at the source */ ++static void udc_disable(struct sa1100_udc *dev) ++{ ++ soft_connect_hook(0); ++ UDC_set(Ser0UDCCR, UDCCR_UDD); ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ ep0_idle(dev); ++} ++ ++static void udc_reinit(struct sa1100_udc *dev) ++{ ++ u32 i; ++ ++ /* Initialize the gadget controller data structure */ ++ INIT_LIST_HEAD(&dev->gadget.ep_list); ++ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); ++ ep0_idle(dev); ++ for ( i = 0 ; i < 3 ; i++) { ++ struct sa1100_ep *ep = &dev->ep[i]; ++ if (i != 0) ++ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list); ++ ep->desc = NULL; ++ ep->stopped = 0; ++ INIT_LIST_HEAD(&ep->queue); ++ } ++} ++ ++/* enable the udc at the source */ ++static void udc_enable(struct sa1100_udc *dev) ++{ ++ UDC_clear (Ser0UDCCR, UDCCR_UDD); ++ ep0_idle(dev); ++} ++ ++static void ep0_start(struct sa1100_udc *dev) ++{ ++ udc_enable(dev); ++ udelay(100); ++ ++ /* clear stall - receiver seems to start stalled? 19Jan01ww */ ++ /* also clear other stuff just to be thurough 22Feb01ww */ ++ UDC_clear(Ser0UDCCS1, UDCCS1_FST | UDCCS1_RPE | UDCCS1_RPC ); ++ UDC_clear(Ser0UDCCS2, UDCCS2_FST | UDCCS2_TPE | UDCCS2_TPC ); ++ ++ /* mask everything */ ++ Ser0UDCCR = 0xFC; ++ ++ /* flush DMA and fire through some -EAGAINs */ ++ ep1_init(dev->ep[1].dmaregs); ++ ep2_init(dev->ep[2].dmaregs); ++ ++ /* enable any platform specific hardware */ ++ soft_connect_hook(1); ++ ++ /* clear all top-level sources */ ++ Ser0UDCSR = UDCSR_RSTIR | UDCSR_RESIR | UDCSR_EIR | ++ UDCSR_RIR | UDCSR_TIR | UDCSR_SUSIR ; ++ ++ /* EXERIMENT - a short line in the spec says toggling this ++ * bit diddles the internal state machine in the udc to ++ * expect a suspend ++ */ ++ Ser0UDCCR |= UDCCR_RESIM; ++ /* END EXPERIMENT 10Feb01ww */ ++ ++ /* enable any platform specific hardware */ ++ soft_connect_hook(1); ++ ++ /* Enable interrupts. If you are unplugged you will immediately ++ * get a suspend interrupt. If you are plugged and have a soft ++ * connect-circuit, you will get a reset. If you are plugged ++ * without a soft-connect, I think you also get suspend. In short, ++ * start with suspend masked and everything else enabled ++ */ ++ UDC_write(Ser0UDCCR, UDCCR_SUSIM); ++} ++ ++ ++/* when a driver is successfully registered, it will receive ++ * control requests including set_configuration(), which enables ++ * non-control requests. then usb traffic follows until a ++ * disconnect is reported. then a host may connect again, or ++ * the driver might get unbound. ++ */ ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++{ ++ struct sa1100_udc *dev = the_controller; ++ int retval; ++ ++ if (!driver || !driver->bind || !driver->setup) ++ return -EINVAL; ++ if (!dev) ++ return -ENODEV; ++ if (dev->driver) ++ return -EBUSY; ++ ++ /* hook up the driver ... */ ++ dev->driver = driver; ++ dev->gadget.dev.driver = &driver->driver; ++ ++ retval = device_add(&dev->gadget.dev); ++ if (retval != 0) { ++ printk(KERN_ERR "Error in device_add() : %d\n",retval); ++ goto register_error; ++ } ++ ++ retval = driver->bind (&dev->gadget); ++ if (retval != 0) { ++ DEBUG(dev, "bind to driver %s --> %d\n", ++ driver->driver.name, retval); ++ device_del(&dev->gadget.dev); ++ goto register_error; ++ } ++ ++ retval = device_create_file(dev->dev, &dev_attr_function); ++ ++ /* ... then enable host detection and ep0; and we're ready ++ * for set_configuration as well as eventual disconnect. ++ */ ++ ep0_start(dev); ++ ++ DEBUG(dev, "%s ready\n", driver->driver.name); ++ ++ return 0; ++ ++register_error: ++ dev->driver = NULL; ++ dev->gadget.dev.driver = NULL; ++ return retval; ++} ++EXPORT_SYMBOL (usb_gadget_register_driver); ++ ++static void ++stop_activity(struct sa1100_udc *dev, struct usb_gadget_driver *driver) ++{ ++ int i; ++ ++ /* don't disconnect if it's not connected */ ++ if (dev->gadget.speed == USB_SPEED_UNKNOWN) ++ driver = NULL; ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ /* mask everything */ ++ Ser0UDCCR = 0xFC; ++ ++ /* stop hardware; prevent new request submissions; ++ * and kill any outstanding requests. ++ */ ++ for (i = 0; i < 3; i++) { ++ struct sa1100_ep *ep = &dev->ep[i]; ++ ep->stopped = 1; ++ nuke(ep, -ESHUTDOWN); ++ } ++ udc_disable (dev); ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (driver) ++ driver->disconnect(&dev->gadget); ++ ++ /* re-init driver-visible data structures */ ++ udc_reinit(dev); ++} ++ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ struct sa1100_udc *dev = the_controller; ++ ++ if (!dev) ++ return -ENODEV; ++ if (!driver || driver != dev->driver) ++ return -EINVAL; ++ ++ local_irq_disable(); ++ stop_activity (dev, driver); ++ local_irq_enable(); ++ if (driver->unbind) ++ driver->unbind(&dev->gadget); ++ dev->driver = 0; ++ ++ device_del(&dev->gadget.dev); ++ device_remove_file(dev->dev, &dev_attr_function); ++ ++ DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name); ++ return 0; ++} ++EXPORT_SYMBOL (usb_gadget_unregister_driver); ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/*-------------------------------------------------------------------------*/ ++ ++////////////////////////////////////////////////////////////////////////////// ++// Proc Filesystem Support ++////////////////////////////////////////////////////////////////////////////// ++ ++#if CONFIG_PROC_FS ++ ++#define SAY(fmt,args...) p += sprintf (p, fmt, ## args) ++#define SAYV(num) p += sprintf (p, num_fmt, "Value", num) ++#define SAYC(label,yn) p += sprintf (p, yn_fmt, label, yn) ++#define SAYS(label,v) p += sprintf (p, cnt_fmt, label, v) ++ ++static int usbctl_read_proc (char *page, char **start, off_t off, ++ int count, int *eof, void *data) ++{ ++ const char * num_fmt = "%25.25s: %8.8lX\n"; ++ const char * cnt_fmt = "%25.25s: %lu\n"; ++ const char * yn_fmt = "%25.25s: %s\n"; ++ const char * yes = "YES"; ++ const char * no = "NO"; ++ unsigned long v; ++ char * p = page; ++ int len; ++ ++ SAY ("SA1100 USB Controller Core\n"); ++ ++ SAYS ("ep0 bytes read", usbd_info.stats.ep0_bytes_read); ++ SAYS ("ep0 bytes written", usbd_info.stats.ep0_bytes_written); ++ SAYS ("ep0 FIFO read failures", usbd_info.stats.ep0_fifo_read_failures); ++ SAYS ("ep0 FIFO write failures", usbd_info.stats.ep0_fifo_write_failures); ++ ++ SAY ("\n"); ++ ++ v = Ser0UDCAR; ++ SAY ("%25.25s: 0x%8.8lX - %ld\n", "Address Register", v, v); ++ v = Ser0UDCIMP; ++ SAY ("%25.25s: %ld (%8.8lX)\n", "IN max packet size", v+1, v); ++ v = Ser0UDCOMP; ++ SAY ("%25.25s: %ld (%8.8lX)\n", "OUT max packet size", v+1, v); ++ ++ v = Ser0UDCCR; ++ SAY ("\nUDC Mask Register\n"); ++ SAYV (v); ++ SAYC ("UDC Active", (v & UDCCR_UDA) ? yes : no); ++ SAYC ("Suspend interrupts masked", (v & UDCCR_SUSIM) ? yes : no); ++ SAYC ("Resume interrupts masked", (v & UDCCR_RESIM) ? yes : no); ++ SAYC ("Reset interrupts masked", (v & UDCCR_REM) ? yes : no); ++ ++ v = Ser0UDCSR; ++ SAY ("\nUDC Interrupt Request Register\n"); ++ SAYV (v); ++ SAYC ("Reset pending", (v & UDCSR_RSTIR) ? yes : no); ++ SAYC ("Suspend pending", (v & UDCSR_SUSIR) ? yes : no); ++ SAYC ("Resume pending", (v & UDCSR_RESIR) ? yes : no); ++ SAYC ("ep0 pending", (v & UDCSR_EIR) ? yes : no); ++ SAYC ("receiver pending", (v & UDCSR_RIR) ? yes : no); ++ SAYC ("tramsitter pending", (v & UDCSR_TIR) ? yes : no); ++ ++#ifdef CONFIG_SA1100_EXTENEX1 ++ SAYC ("\nSoft connect", (PPSR & PPC_USB_SOFT_CON) ? "Visible" : "Hidden"); ++#endif ++ ++#if 1 ++ SAY ("\nDMA Tx registers\n"); ++ { ++ dma_regs_t *r=the_controller->ep[2].dmaregs; ++ SAY (" DDAR"); ++ SAYV(r->DDAR); ++ SAY (" DCSR"); ++ SAYV(r->RdDCSR); ++ SAY (" DBSA (address buf A) "); ++ SAYV(r->DBSA); ++ SAY (" DBTA (transfer count A) "); ++ SAYV(r->DBTA); ++ SAY (" DBSB (address buf B) "); ++ SAYV(r->DBSB); ++ SAY (" DBTB (transfer count B) "); ++ SAYV(r->DBTB); ++ ++ } ++ SAY ("\nDMA Rx registers\n"); ++ { ++ dma_regs_t *r=the_controller->ep[1].dmaregs; ++ SAY (" DDAR"); ++ SAYV(r->DDAR); ++ SAY (" DCSR"); ++ SAYV(r->RdDCSR); ++ SAY (" DBSA (address buf A) "); ++ SAYV(r->DBSA); ++ SAY (" DBTA (transfer count A) "); ++ SAYV(r->DBTA); ++ SAY (" DBSB (address buf B) "); ++ SAYV(r->DBSB); ++ SAY (" DBTB (transfer count B) "); ++ SAYV(r->DBTB); ++ ++ } ++#endif ++#if 1 ++ v = Ser0UDCCS0; ++ SAY ("\nUDC Endpoint Zero Status Register\n"); ++ SAYV (v); ++ SAYC ("Out Packet Ready", (v & UDCCS0_OPR) ? yes : no); ++ SAYC ("In Packet Ready", (v & UDCCS0_IPR) ? yes : no); ++ SAYC ("Sent Stall", (v & UDCCS0_SST) ? yes : no); ++ SAYC ("Force Stall", (v & UDCCS0_FST) ? yes : no); ++ SAYC ("Data End", (v & UDCCS0_DE) ? yes : no); ++ SAYC ("Data Setup End", (v & UDCCS0_SE) ? yes : no); ++ SAYC ("Serviced (SO)", (v & UDCCS0_SO) ? yes : no); ++ ++ v = Ser0UDCCS1; ++ SAY ("\nUDC Receiver Status Register\n"); ++ SAYV (v); ++ SAYC ("Receive Packet Complete", (v & UDCCS1_RPC) ? yes : no); ++ SAYC ("Sent Stall", (v & UDCCS1_SST) ? yes : no); ++ SAYC ("Force Stall", (v & UDCCS1_FST) ? yes : no); ++ SAYC ("Receive Packet Error", (v & UDCCS1_RPE) ? yes : no); ++ SAYC ("Receive FIFO not empty", (v & UDCCS1_RNE) ? yes : no); ++ ++ v = Ser0UDCCS2; ++ SAY ("\nUDC Transmitter Status Register\n"); ++ SAYV (v); ++ SAYC ("FIFO has < 8 of 16 chars", (v & UDCCS2_TFS) ? yes : no); ++ SAYC ("Transmit Packet Complete", (v & UDCCS2_TPC) ? yes : no); ++ SAYC ("Transmit FIFO underrun", (v & UDCCS2_TUR) ? yes : no); ++ SAYC ("Transmit Packet Error", (v & UDCCS2_TPE) ? yes : no); ++ SAYC ("Sent Stall", (v & UDCCS2_SST) ? yes : no); ++ SAYC ("Force Stall", (v & UDCCS2_FST) ? yes : no); ++#endif ++ ++ len = (p - page) - off; ++ if (len < 0) ++ len = 0; ++ *eof = (len <=count) ? 1 : 0; ++ *start = page + off; ++ return len; ++} ++ ++static inline void register_proc_entry (void) ++{ ++ create_proc_read_entry (driver_name, 0, NULL, ++ usbctl_read_proc, NULL); ++} ++ ++static inline void unregister_proc_entry (void) ++{ ++ remove_proc_entry (driver_name, NULL); ++} ++ ++#else ++ ++#define register_proc_entry() do {} while (0) ++#define unregister_proc_entry() do {} while (0) ++ ++#endif /* CONFIG_PROC_FS */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++MODULE_DESCRIPTION ("sa1100_udc"); ++MODULE_AUTHOR ("Various"); ++MODULE_LICENSE ("GPL"); ++ ++static struct sa1100_udc memory = { ++ .gadget = { ++ .ops = &sa1100_ops, ++ .ep0 = &memory.ep[0].ep, ++ .name = driver_name, ++ .dev = { ++ .bus_id = "gadget", ++ }, ++ }, ++ ++ /* control endpoint */ ++ .ep[0] = { ++ .ep = { ++ .name = ep0name, ++ .ops = &sa1100_ep_ops, ++ .maxpacket = EP0_FIFO_SIZE, ++ }, ++ .dev = &memory, ++ }, ++ ++ /* first group of endpoints */ ++ .ep[1] = { ++ .ep = { ++ .name = "ep1out-bulk", ++ .ops = &sa1100_ep_ops, ++ .maxpacket = BULK_FIFO_SIZE, ++ }, ++ .dev = &memory, ++ }, ++ .ep[2] = { ++ .ep = { ++ .name = "ep2in-bulk", ++ .ops = &sa1100_ep_ops, ++ .maxpacket = BULK_FIFO_SIZE, ++ }, ++ .dev = &memory, ++ } ++}; ++ ++static int __init sa1100_udc_probe(struct device *_dev) ++{ ++ struct sa1100_udc *dev = &memory; ++ int retval = 0; ++ ++ /* setup dev */ ++ dev->dev = _dev; ++// dev->mach = _dev->platform_data; ++ ++ device_initialize(&dev->gadget.dev); ++ dev->gadget.dev.parent = _dev; ++ dev->gadget.dev.dma_mask = _dev->dma_mask; ++ ++ the_controller = dev; ++ dev_set_drvdata(_dev, dev); ++ ++ /* controller stays disabled until gadget driver is bound */ ++ udc_disable(dev); ++ udc_reinit(dev); ++ ++// spin_lock_init(&the_udc.lock); ++ register_proc_entry(); ++ ++#if defined(CONFIG_SA1100_COLLIE) ++ collie_usb_init(); ++#endif ++ ++ /* setup dma channels and IRQ */ ++ retval = sa1100_request_dma(DMA_Ser0UDCRd, "USB receive", ++ NULL, NULL, &dev->ep[1].dmaregs); ++ if (retval) { ++ ERROR(dev, "couldn't get rx dma, err %d\n", retval); ++ goto err_rx_dma; ++ } ++ retval = sa1100_request_dma(DMA_Ser0UDCWr, "USB transmit", ++ NULL, NULL, &dev->ep[2].dmaregs); ++ if (retval) { ++ ERROR(dev, "couldn't get tx dma, err %d\n", retval); ++ goto err_tx_dma; ++ } ++ retval = request_irq(IRQ_Ser0UDC, udc_int_hndlr, IRQF_DISABLED, ++ driver_name, dev); ++ if (retval) { ++ ERROR(dev, "couldn't get irq, err %d\n", retval); ++ goto err_irq; ++ } ++ ++ INFO(dev, "initialized, rx %p tx %p irq %d\n", ++ dev->ep[1].dmaregs, dev->ep[2].dmaregs, IRQ_Ser0UDC); ++ return 0; ++ ++err_irq: ++ sa1100_free_dma(dev->ep[2].dmaregs); ++ usbd_info.dmaregs_rx = 0; ++err_tx_dma: ++ sa1100_free_dma(dev->ep[1].dmaregs); ++ usbd_info.dmaregs_tx = 0; ++err_rx_dma: ++ return retval; ++} ++ ++static int __exit sa1100_udc_remove(struct device *_dev) ++{ ++ struct sa1100_udc *dev = dev_get_drvdata(_dev); ++ ++ udc_disable(dev); ++ unregister_proc_entry(); ++ usb_gadget_unregister_driver(dev->driver); ++ sa1100_free_dma(dev->ep[1].dmaregs); ++ sa1100_free_dma(dev->ep[2].dmaregs); ++ free_irq(IRQ_Ser0UDC, dev); ++ dev_set_drvdata(_dev,NULL); ++ the_controller = NULL; ++#if defined(CONFIG_SA1100_COLLIE) ++ collie_usb_exit(); ++#endif ++ return 0; ++} ++ ++static struct device_driver udc_driver = { ++ .name = "sa11x0-udc", ++ .bus = &platform_bus_type, ++ .probe = sa1100_udc_probe, ++ .remove = __exit_p(sa1100_udc_remove), ++// .suspend = sa1100_udc_suspend, ++// .resume = sa1100_udc_resume, ++ .owner = THIS_MODULE, ++}; ++ ++static int __init udc_init(void) ++{ ++ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); ++#ifdef NCB_DMA_FIX ++ send_buffer = (char*) kzalloc(SEND_BUFFER_SIZE, GFP_KERNEL | GFP_DMA ); ++ receive_buffer = (char*) kzalloc(RECEIVE_BUFFER_SIZE, GFP_KERNEL | GFP_DMA ); ++#endif ++ return driver_register(&udc_driver); ++} ++module_init(udc_init); ++ ++static void __exit udc_exit(void) ++{ ++#ifdef NCB_DMA_FIX ++ if (send_buffer) { ++ kfree(send_buffer); ++ send_buffer = NULL; ++ } ++ if (receive_buffer) { ++ kfree(receive_buffer); ++ receive_buffer = NULL; ++ } ++#endif ++ driver_unregister(&udc_driver); ++} ++module_exit(udc_exit); +diff --git a/drivers/usb/gadget/sa1100_udc.h b/drivers/usb/gadget/sa1100_udc.h +new file mode 100644 +index 0000000..86fa28d +--- /dev/null ++++ b/drivers/usb/gadget/sa1100_udc.h +@@ -0,0 +1,94 @@ ++/* ++ * internals of "new style" UDC controller ++ * <linux/usb_gadget.h> replaces ARM-specific "sa1100_usb.h". ++ */ ++ ++struct sa1100_ep { ++ struct usb_ep ep; ++ struct sa1100_udc *dev; ++ //unsigned long irqs; ++ ++ const struct usb_endpoint_descriptor *desc; ++ struct list_head queue; ++ dma_regs_t *dmaregs; ++ unsigned stopped : 1; ++}; ++ ++struct sa1100_request { ++ struct usb_request req; ++ struct list_head queue; ++// NCB unsigned mapped : 1; ++}; ++ ++enum ep0_state { ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_END_XFER, ++ EP0_STALL, ++}; ++ ++#define EP0_FIFO_SIZE ((unsigned)8) ++#define BULK_FIFO_SIZE ((unsigned)64) ++//#define ISO_FIFO_SIZE ((unsigned)256) ++//#define INT_FIFO_SIZE ((unsigned)8) ++ ++struct udc_stats { ++ struct ep0stats { ++ unsigned long ops; ++ unsigned long bytes; ++ } read, write; ++ unsigned long irqs; ++}; ++ ++struct sa1100_udc { ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ struct device *dev; ++ enum ep0_state ep0state; ++ struct udc_stats stats; ++// NCB spinlock_t lock; ++// NCB dma_regs_t *dmaregs_tx, *dmaregs_rx; ++ unsigned got_irq : 1, ++ vbus : 1, ++ pullup : 1, ++ has_cfr : 1, ++ req_pending : 1, ++ req_std : 1, ++ req_config : 1; ++ struct timer_list timer; ++ u64 dma_mask; ++ unsigned char address; ++ struct sa1100_ep ep[3]; ++ int ep0_req_len; ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define xprintk(dev,level,fmt,args...) \ ++ printk(level "%s: " fmt , driver_name , ## args) ++ ++#ifdef DEBUG ++#undef DEBUG ++#define DEBUG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DEBUG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDEBUG DEBUG ++#else ++#define VDEBUG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN_(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args)
++ ++/*-------------------------------------------------------------------------*/ +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0010-mmc_spi-add-suspend-and-resume-callbacks.patch b/recipes/linux/linux-2.6.28/collie/0010-mmc_spi-add-suspend-and-resume-callbacks.patch new file mode 100644 index 0000000000..fbf1b4573b --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0010-mmc_spi-add-suspend-and-resume-callbacks.patch @@ -0,0 +1,59 @@ +From 53fc40876ed9b753f935361fb1027718a184c41e Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Thu, 5 Feb 2009 00:49:03 +0100 +Subject: [PATCH 10/23] mmc_spi: add suspend and resume callbacks + +--- + drivers/mmc/host/mmc_spi.c | 29 +++++++++++++++++++++++++++++ + 1 files changed, 29 insertions(+), 0 deletions(-) + +diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c +index ad00e16..ac6719b 100644 +--- a/drivers/mmc/host/mmc_spi.c ++++ b/drivers/mmc/host/mmc_spi.c +@@ -1407,6 +1407,33 @@ static int __devexit mmc_spi_remove(struct spi_device *spi) + return 0; + } + ++#ifdef CONFIG_PM ++static int mmc_spi_suspend(struct spi_device *spi, pm_message_t state) ++{ ++ struct mmc_host *mmc = dev_get_drvdata(&spi->dev); ++ struct mmc_spi_host *host = mmc_priv(mmc); ++ int ret = 0; ++ ++ if (mmc) ++ ret = mmc_suspend_host(mmc, state); ++ return ret; ++} ++ ++static int mmc_spi_resume(struct spi_device *spi) ++{ ++ struct mmc_host *mmc = dev_get_drvdata(&spi->dev); ++ int ret = 0; ++ ++ if (mmc) ++ ret = mmc_resume_host(mmc); ++ ++ return ret; ++} ++#else ++#define mmc_spi_suspend NULL ++#define mmc_spi_resume NULL ++#endif ++ + + static struct spi_driver mmc_spi_driver = { + .driver = { +@@ -1416,6 +1443,8 @@ static struct spi_driver mmc_spi_driver = { + }, + .probe = mmc_spi_probe, + .remove = __devexit_p(mmc_spi_remove), ++ .suspend = mmc_spi_suspend, ++ .resume = mmc_spi_resume, + }; + + +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0011-move-drivers-mfd-.h-to-include-linux-mfd.patch b/recipes/linux/linux-2.6.28/collie/0011-move-drivers-mfd-.h-to-include-linux-mfd.patch new file mode 100644 index 0000000000..0bc3dbb713 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0011-move-drivers-mfd-.h-to-include-linux-mfd.patch @@ -0,0 +1,803 @@ +From c69779dac8693a3b057b3708d19f7013c6973bf2 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 14:54:57 +0100 +Subject: [PATCH 11/23] move drivers/mfd/*.h to include/linux/mfd + +So drivers like collie_battery driver can use +those files easier. +--- + arch/arm/mach-sa1100/collie_pm.c | 2 +- + drivers/mfd/mcp-core.c | 2 +- + drivers/mfd/mcp-sa11x0.c | 2 +- + drivers/mfd/mcp.h | 66 ---------- + drivers/mfd/ucb1x00-assabet.c | 2 +- + drivers/mfd/ucb1x00-core.c | 2 +- + drivers/mfd/ucb1x00-ts.c | 2 +- + drivers/mfd/ucb1x00.h | 255 -------------------------------------- + include/linux/mfd/mcp.h | 68 ++++++++++ + include/linux/mfd/ucb1x00.h | 255 ++++++++++++++++++++++++++++++++++++++ + 10 files changed, 329 insertions(+), 327 deletions(-) + delete mode 100644 drivers/mfd/mcp.h + delete mode 100644 drivers/mfd/ucb1x00.h + create mode 100644 include/linux/mfd/mcp.h + create mode 100644 include/linux/mfd/ucb1x00.h + +diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c +index b1161fc..65b8b31 100644 +--- a/arch/arm/mach-sa1100/collie_pm.c ++++ b/arch/arm/mach-sa1100/collie_pm.c +@@ -22,6 +22,7 @@ + #include <linux/interrupt.h> + #include <linux/device.h> + #include <linux/platform_device.h> ++#include <linux/mfd/ucb1x00.h> + + #include <asm/irq.h> + #include <mach/hardware.h> +@@ -31,7 +32,6 @@ + #include <asm/mach/sharpsl_param.h> + #include <asm/hardware/sharpsl_pm.h> + +-#include "../drivers/mfd/ucb1x00.h" + + static struct ucb1x00 *ucb; + static int ad_revise; +diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c +index b4ed57e..64c806a 100644 +--- a/drivers/mfd/mcp-core.c ++++ b/drivers/mfd/mcp-core.c +@@ -17,11 +17,11 @@ + #include <linux/device.h> + #include <linux/slab.h> + #include <linux/string.h> ++#include <linux/mfd/mcp.h> + + #include <asm/dma.h> + #include <asm/system.h> + +-#include "mcp.h" + + #define to_mcp(d) container_of(d, struct mcp, attached_device) + #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) +diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c +index 28380b2..88c81cf 100644 +--- a/drivers/mfd/mcp-sa11x0.c ++++ b/drivers/mfd/mcp-sa11x0.c +@@ -19,6 +19,7 @@ + #include <linux/spinlock.h> + #include <linux/slab.h> + #include <linux/platform_device.h> ++#include <linux/mfd/mcp.h> + + #include <asm/dma.h> + #include <mach/hardware.h> +@@ -28,7 +29,6 @@ + + #include <mach/assabet.h> + +-#include "mcp.h" + + struct mcp_sa11x0 { + u32 mccr0; +diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h +deleted file mode 100644 +index c093a93..0000000 +--- a/drivers/mfd/mcp.h ++++ /dev/null +@@ -1,66 +0,0 @@ +-/* +- * linux/drivers/mfd/mcp.h +- * +- * Copyright (C) 2001 Russell King, All Rights Reserved. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License. +- */ +-#ifndef MCP_H +-#define MCP_H +- +-struct mcp_ops; +- +-struct mcp { +- struct module *owner; +- struct mcp_ops *ops; +- spinlock_t lock; +- int use_count; +- unsigned int sclk_rate; +- unsigned int rw_timeout; +- dma_device_t dma_audio_rd; +- dma_device_t dma_audio_wr; +- dma_device_t dma_telco_rd; +- dma_device_t dma_telco_wr; +- struct device attached_device; +-}; +- +-struct mcp_ops { +- void (*set_telecom_divisor)(struct mcp *, unsigned int); +- void (*set_audio_divisor)(struct mcp *, unsigned int); +- void (*reg_write)(struct mcp *, unsigned int, unsigned int); +- unsigned int (*reg_read)(struct mcp *, unsigned int); +- void (*enable)(struct mcp *); +- void (*disable)(struct mcp *); +-}; +- +-void mcp_set_telecom_divisor(struct mcp *, unsigned int); +-void mcp_set_audio_divisor(struct mcp *, unsigned int); +-void mcp_reg_write(struct mcp *, unsigned int, unsigned int); +-unsigned int mcp_reg_read(struct mcp *, unsigned int); +-void mcp_enable(struct mcp *); +-void mcp_disable(struct mcp *); +-#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) +- +-struct mcp *mcp_host_alloc(struct device *, size_t); +-int mcp_host_register(struct mcp *); +-void mcp_host_unregister(struct mcp *); +- +-struct mcp_driver { +- struct device_driver drv; +- int (*probe)(struct mcp *); +- void (*remove)(struct mcp *); +- int (*suspend)(struct mcp *, pm_message_t); +- int (*resume)(struct mcp *); +-}; +- +-int mcp_driver_register(struct mcp_driver *); +-void mcp_driver_unregister(struct mcp_driver *); +- +-#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) +-#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) +- +-#define mcp_priv(mcp) ((void *)((mcp)+1)) +- +-#endif +diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c +index 61aeaf7..0f6f46d 100644 +--- a/drivers/mfd/ucb1x00-assabet.c ++++ b/drivers/mfd/ucb1x00-assabet.c +@@ -14,10 +14,10 @@ + #include <linux/fs.h> + #include <linux/proc_fs.h> + #include <linux/device.h> ++#include <linux/mfd/ucb1x00.h> + + #include <asm/dma.h> + +-#include "ucb1x00.h" + + #define UCB1X00_ATTR(name,input)\ + static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ +diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c +index a316f1b..bc2c1ba 100644 +--- a/drivers/mfd/ucb1x00-core.c ++++ b/drivers/mfd/ucb1x00-core.c +@@ -24,11 +24,11 @@ + #include <linux/interrupt.h> + #include <linux/device.h> + #include <linux/mutex.h> ++#include <linux/mfd/ucb1x00.h> + + #include <asm/dma.h> + #include <mach/hardware.h> + +-#include "ucb1x00.h" + + static DEFINE_MUTEX(ucb1x00_mutex); + static LIST_HEAD(ucb1x00_drivers); +diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c +index 44762ca..b5feae9 100644 +--- a/drivers/mfd/ucb1x00-ts.c ++++ b/drivers/mfd/ucb1x00-ts.c +@@ -30,12 +30,12 @@ + #include <linux/freezer.h> + #include <linux/slab.h> + #include <linux/kthread.h> ++#include <linux/mfd/ucb1x00.h> + + #include <asm/dma.h> + #include <mach/collie.h> + #include <asm/mach-types.h> + +-#include "ucb1x00.h" + + + struct ucb1x00_ts { +diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h +deleted file mode 100644 +index a8ad8a0..0000000 +--- a/drivers/mfd/ucb1x00.h ++++ /dev/null +@@ -1,255 +0,0 @@ +-/* +- * linux/drivers/mfd/ucb1x00.h +- * +- * Copyright (C) 2001 Russell King, All Rights Reserved. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License as published by +- * the Free Software Foundation; either version 2 of the License. +- */ +-#ifndef UCB1200_H +-#define UCB1200_H +- +-#define UCB_IO_DATA 0x00 +-#define UCB_IO_DIR 0x01 +- +-#define UCB_IO_0 (1 << 0) +-#define UCB_IO_1 (1 << 1) +-#define UCB_IO_2 (1 << 2) +-#define UCB_IO_3 (1 << 3) +-#define UCB_IO_4 (1 << 4) +-#define UCB_IO_5 (1 << 5) +-#define UCB_IO_6 (1 << 6) +-#define UCB_IO_7 (1 << 7) +-#define UCB_IO_8 (1 << 8) +-#define UCB_IO_9 (1 << 9) +- +-#define UCB_IE_RIS 0x02 +-#define UCB_IE_FAL 0x03 +-#define UCB_IE_STATUS 0x04 +-#define UCB_IE_CLEAR 0x04 +-#define UCB_IE_ADC (1 << 11) +-#define UCB_IE_TSPX (1 << 12) +-#define UCB_IE_TSMX (1 << 13) +-#define UCB_IE_TCLIP (1 << 14) +-#define UCB_IE_ACLIP (1 << 15) +- +-#define UCB_IRQ_TSPX 12 +- +-#define UCB_TC_A 0x05 +-#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */ +-#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */ +- +-#define UCB_TC_B 0x06 +-#define UCB_TC_B_VOICE_ENA (1 << 3) +-#define UCB_TC_B_CLIP (1 << 4) +-#define UCB_TC_B_ATT (1 << 6) +-#define UCB_TC_B_SIDE_ENA (1 << 11) +-#define UCB_TC_B_MUTE (1 << 13) +-#define UCB_TC_B_IN_ENA (1 << 14) +-#define UCB_TC_B_OUT_ENA (1 << 15) +- +-#define UCB_AC_A 0x07 +-#define UCB_AC_B 0x08 +-#define UCB_AC_B_LOOP (1 << 8) +-#define UCB_AC_B_MUTE (1 << 13) +-#define UCB_AC_B_IN_ENA (1 << 14) +-#define UCB_AC_B_OUT_ENA (1 << 15) +- +-#define UCB_TS_CR 0x09 +-#define UCB_TS_CR_TSMX_POW (1 << 0) +-#define UCB_TS_CR_TSPX_POW (1 << 1) +-#define UCB_TS_CR_TSMY_POW (1 << 2) +-#define UCB_TS_CR_TSPY_POW (1 << 3) +-#define UCB_TS_CR_TSMX_GND (1 << 4) +-#define UCB_TS_CR_TSPX_GND (1 << 5) +-#define UCB_TS_CR_TSMY_GND (1 << 6) +-#define UCB_TS_CR_TSPY_GND (1 << 7) +-#define UCB_TS_CR_MODE_INT (0 << 8) +-#define UCB_TS_CR_MODE_PRES (1 << 8) +-#define UCB_TS_CR_MODE_POS (2 << 8) +-#define UCB_TS_CR_BIAS_ENA (1 << 11) +-#define UCB_TS_CR_TSPX_LOW (1 << 12) +-#define UCB_TS_CR_TSMX_LOW (1 << 13) +- +-#define UCB_ADC_CR 0x0a +-#define UCB_ADC_SYNC_ENA (1 << 0) +-#define UCB_ADC_VREFBYP_CON (1 << 1) +-#define UCB_ADC_INP_TSPX (0 << 2) +-#define UCB_ADC_INP_TSMX (1 << 2) +-#define UCB_ADC_INP_TSPY (2 << 2) +-#define UCB_ADC_INP_TSMY (3 << 2) +-#define UCB_ADC_INP_AD0 (4 << 2) +-#define UCB_ADC_INP_AD1 (5 << 2) +-#define UCB_ADC_INP_AD2 (6 << 2) +-#define UCB_ADC_INP_AD3 (7 << 2) +-#define UCB_ADC_EXT_REF (1 << 5) +-#define UCB_ADC_START (1 << 7) +-#define UCB_ADC_ENA (1 << 15) +- +-#define UCB_ADC_DATA 0x0b +-#define UCB_ADC_DAT_VAL (1 << 15) +-#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5) +- +-#define UCB_ID 0x0c +-#define UCB_ID_1200 0x1004 +-#define UCB_ID_1300 0x1005 +-#define UCB_ID_TC35143 0x9712 +- +-#define UCB_MODE 0x0d +-#define UCB_MODE_DYN_VFLAG_ENA (1 << 12) +-#define UCB_MODE_AUD_OFF_CAN (1 << 13) +- +-#include "mcp.h" +- +-struct ucb1x00_irq { +- void *devid; +- void (*fn)(int, void *); +-}; +- +-struct ucb1x00 { +- spinlock_t lock; +- struct mcp *mcp; +- unsigned int irq; +- struct semaphore adc_sem; +- spinlock_t io_lock; +- u16 id; +- u16 io_dir; +- u16 io_out; +- u16 adc_cr; +- u16 irq_fal_enbl; +- u16 irq_ris_enbl; +- struct ucb1x00_irq irq_handler[16]; +- struct device dev; +- struct list_head node; +- struct list_head devs; +-}; +- +-struct ucb1x00_driver; +- +-struct ucb1x00_dev { +- struct list_head dev_node; +- struct list_head drv_node; +- struct ucb1x00 *ucb; +- struct ucb1x00_driver *drv; +- void *priv; +-}; +- +-struct ucb1x00_driver { +- struct list_head node; +- struct list_head devs; +- int (*add)(struct ucb1x00_dev *dev); +- void (*remove)(struct ucb1x00_dev *dev); +- int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); +- int (*resume)(struct ucb1x00_dev *dev); +-}; +- +-#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev) +- +-int ucb1x00_register_driver(struct ucb1x00_driver *); +-void ucb1x00_unregister_driver(struct ucb1x00_driver *); +- +-/** +- * ucb1x00_clkrate - return the UCB1x00 SIB clock rate +- * @ucb: UCB1x00 structure describing chip +- * +- * Return the SIB clock rate in Hz. +- */ +-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb) +-{ +- return mcp_get_sclk_rate(ucb->mcp); +-} +- +-/** +- * ucb1x00_enable - enable the UCB1x00 SIB clock +- * @ucb: UCB1x00 structure describing chip +- * +- * Enable the SIB clock. This can be called multiple times. +- */ +-static inline void ucb1x00_enable(struct ucb1x00 *ucb) +-{ +- mcp_enable(ucb->mcp); +-} +- +-/** +- * ucb1x00_disable - disable the UCB1x00 SIB clock +- * @ucb: UCB1x00 structure describing chip +- * +- * Disable the SIB clock. The SIB clock will only be disabled +- * when the number of ucb1x00_enable calls match the number of +- * ucb1x00_disable calls. +- */ +-static inline void ucb1x00_disable(struct ucb1x00 *ucb) +-{ +- mcp_disable(ucb->mcp); +-} +- +-/** +- * ucb1x00_reg_write - write a UCB1x00 register +- * @ucb: UCB1x00 structure describing chip +- * @reg: UCB1x00 4-bit register index to write +- * @val: UCB1x00 16-bit value to write +- * +- * Write the UCB1x00 register @reg with value @val. The SIB +- * clock must be running for this function to return. +- */ +-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val) +-{ +- mcp_reg_write(ucb->mcp, reg, val); +-} +- +-/** +- * ucb1x00_reg_read - read a UCB1x00 register +- * @ucb: UCB1x00 structure describing chip +- * @reg: UCB1x00 4-bit register index to write +- * +- * Read the UCB1x00 register @reg and return its value. The SIB +- * clock must be running for this function to return. +- */ +-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg) +-{ +- return mcp_reg_read(ucb->mcp, reg); +-} +-/** +- * ucb1x00_set_audio_divisor - +- * @ucb: UCB1x00 structure describing chip +- * @div: SIB clock divisor +- */ +-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div) +-{ +- mcp_set_audio_divisor(ucb->mcp, div); +-} +- +-/** +- * ucb1x00_set_telecom_divisor - +- * @ucb: UCB1x00 structure describing chip +- * @div: SIB clock divisor +- */ +-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div) +-{ +- mcp_set_telecom_divisor(ucb->mcp, div); +-} +- +-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int); +-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int); +-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb); +- +-#define UCB_NOSYNC (0) +-#define UCB_SYNC (1) +- +-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); +-void ucb1x00_adc_enable(struct ucb1x00 *ucb); +-void ucb1x00_adc_disable(struct ucb1x00 *ucb); +- +-/* +- * Which edges of the IRQ do you want to control today? +- */ +-#define UCB_RISING (1 << 0) +-#define UCB_FALLING (1 << 1) +- +-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); +-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); +-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); +-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); +- +-#endif +diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h +new file mode 100644 +index 0000000..be95e09 +--- /dev/null ++++ b/include/linux/mfd/mcp.h +@@ -0,0 +1,68 @@ ++/* ++ * linux/drivers/mfd/mcp.h ++ * ++ * Copyright (C) 2001 Russell King, All Rights Reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License. ++ */ ++#ifndef MCP_H ++#define MCP_H ++ ++#include <mach/dma.h> ++ ++struct mcp_ops; ++ ++struct mcp { ++ struct module *owner; ++ struct mcp_ops *ops; ++ spinlock_t lock; ++ int use_count; ++ unsigned int sclk_rate; ++ unsigned int rw_timeout; ++ dma_device_t dma_audio_rd; ++ dma_device_t dma_audio_wr; ++ dma_device_t dma_telco_rd; ++ dma_device_t dma_telco_wr; ++ struct device attached_device; ++}; ++ ++struct mcp_ops { ++ void (*set_telecom_divisor)(struct mcp *, unsigned int); ++ void (*set_audio_divisor)(struct mcp *, unsigned int); ++ void (*reg_write)(struct mcp *, unsigned int, unsigned int); ++ unsigned int (*reg_read)(struct mcp *, unsigned int); ++ void (*enable)(struct mcp *); ++ void (*disable)(struct mcp *); ++}; ++ ++void mcp_set_telecom_divisor(struct mcp *, unsigned int); ++void mcp_set_audio_divisor(struct mcp *, unsigned int); ++void mcp_reg_write(struct mcp *, unsigned int, unsigned int); ++unsigned int mcp_reg_read(struct mcp *, unsigned int); ++void mcp_enable(struct mcp *); ++void mcp_disable(struct mcp *); ++#define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) ++ ++struct mcp *mcp_host_alloc(struct device *, size_t); ++int mcp_host_register(struct mcp *); ++void mcp_host_unregister(struct mcp *); ++ ++struct mcp_driver { ++ struct device_driver drv; ++ int (*probe)(struct mcp *); ++ void (*remove)(struct mcp *); ++ int (*suspend)(struct mcp *, pm_message_t); ++ int (*resume)(struct mcp *); ++}; ++ ++int mcp_driver_register(struct mcp_driver *); ++void mcp_driver_unregister(struct mcp_driver *); ++ ++#define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) ++#define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) ++ ++#define mcp_priv(mcp) ((void *)((mcp)+1)) ++ ++#endif +diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h +new file mode 100644 +index 0000000..eac3463 +--- /dev/null ++++ b/include/linux/mfd/ucb1x00.h +@@ -0,0 +1,255 @@ ++/* ++ * linux/include/mfd/ucb1x00.h ++ * ++ * Copyright (C) 2001 Russell King, All Rights Reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License. ++ */ ++#ifndef UCB1200_H ++#define UCB1200_H ++ ++#include <linux/mfd/mcp.h> ++#define UCB_IO_DATA 0x00 ++#define UCB_IO_DIR 0x01 ++ ++#define UCB_IO_0 (1 << 0) ++#define UCB_IO_1 (1 << 1) ++#define UCB_IO_2 (1 << 2) ++#define UCB_IO_3 (1 << 3) ++#define UCB_IO_4 (1 << 4) ++#define UCB_IO_5 (1 << 5) ++#define UCB_IO_6 (1 << 6) ++#define UCB_IO_7 (1 << 7) ++#define UCB_IO_8 (1 << 8) ++#define UCB_IO_9 (1 << 9) ++ ++#define UCB_IE_RIS 0x02 ++#define UCB_IE_FAL 0x03 ++#define UCB_IE_STATUS 0x04 ++#define UCB_IE_CLEAR 0x04 ++#define UCB_IE_ADC (1 << 11) ++#define UCB_IE_TSPX (1 << 12) ++#define UCB_IE_TSMX (1 << 13) ++#define UCB_IE_TCLIP (1 << 14) ++#define UCB_IE_ACLIP (1 << 15) ++ ++#define UCB_IRQ_TSPX 12 ++ ++#define UCB_TC_A 0x05 ++#define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */ ++#define UCB_TC_A_AMPL (1 << 7) /* UCB1300 */ ++ ++#define UCB_TC_B 0x06 ++#define UCB_TC_B_VOICE_ENA (1 << 3) ++#define UCB_TC_B_CLIP (1 << 4) ++#define UCB_TC_B_ATT (1 << 6) ++#define UCB_TC_B_SIDE_ENA (1 << 11) ++#define UCB_TC_B_MUTE (1 << 13) ++#define UCB_TC_B_IN_ENA (1 << 14) ++#define UCB_TC_B_OUT_ENA (1 << 15) ++ ++#define UCB_AC_A 0x07 ++#define UCB_AC_B 0x08 ++#define UCB_AC_B_LOOP (1 << 8) ++#define UCB_AC_B_MUTE (1 << 13) ++#define UCB_AC_B_IN_ENA (1 << 14) ++#define UCB_AC_B_OUT_ENA (1 << 15) ++ ++#define UCB_TS_CR 0x09 ++#define UCB_TS_CR_TSMX_POW (1 << 0) ++#define UCB_TS_CR_TSPX_POW (1 << 1) ++#define UCB_TS_CR_TSMY_POW (1 << 2) ++#define UCB_TS_CR_TSPY_POW (1 << 3) ++#define UCB_TS_CR_TSMX_GND (1 << 4) ++#define UCB_TS_CR_TSPX_GND (1 << 5) ++#define UCB_TS_CR_TSMY_GND (1 << 6) ++#define UCB_TS_CR_TSPY_GND (1 << 7) ++#define UCB_TS_CR_MODE_INT (0 << 8) ++#define UCB_TS_CR_MODE_PRES (1 << 8) ++#define UCB_TS_CR_MODE_POS (2 << 8) ++#define UCB_TS_CR_BIAS_ENA (1 << 11) ++#define UCB_TS_CR_TSPX_LOW (1 << 12) ++#define UCB_TS_CR_TSMX_LOW (1 << 13) ++ ++#define UCB_ADC_CR 0x0a ++#define UCB_ADC_SYNC_ENA (1 << 0) ++#define UCB_ADC_VREFBYP_CON (1 << 1) ++#define UCB_ADC_INP_TSPX (0 << 2) ++#define UCB_ADC_INP_TSMX (1 << 2) ++#define UCB_ADC_INP_TSPY (2 << 2) ++#define UCB_ADC_INP_TSMY (3 << 2) ++#define UCB_ADC_INP_AD0 (4 << 2) ++#define UCB_ADC_INP_AD1 (5 << 2) ++#define UCB_ADC_INP_AD2 (6 << 2) ++#define UCB_ADC_INP_AD3 (7 << 2) ++#define UCB_ADC_EXT_REF (1 << 5) ++#define UCB_ADC_START (1 << 7) ++#define UCB_ADC_ENA (1 << 15) ++ ++#define UCB_ADC_DATA 0x0b ++#define UCB_ADC_DAT_VAL (1 << 15) ++#define UCB_ADC_DAT(x) (((x) & 0x7fe0) >> 5) ++ ++#define UCB_ID 0x0c ++#define UCB_ID_1200 0x1004 ++#define UCB_ID_1300 0x1005 ++#define UCB_ID_TC35143 0x9712 ++ ++#define UCB_MODE 0x0d ++#define UCB_MODE_DYN_VFLAG_ENA (1 << 12) ++#define UCB_MODE_AUD_OFF_CAN (1 << 13) ++ ++ ++struct ucb1x00_irq { ++ void *devid; ++ void (*fn)(int, void *); ++}; ++ ++struct ucb1x00 { ++ spinlock_t lock; ++ struct mcp *mcp; ++ unsigned int irq; ++ struct semaphore adc_sem; ++ spinlock_t io_lock; ++ u16 id; ++ u16 io_dir; ++ u16 io_out; ++ u16 adc_cr; ++ u16 irq_fal_enbl; ++ u16 irq_ris_enbl; ++ struct ucb1x00_irq irq_handler[16]; ++ struct device dev; ++ struct list_head node; ++ struct list_head devs; ++}; ++ ++struct ucb1x00_driver; ++ ++struct ucb1x00_dev { ++ struct list_head dev_node; ++ struct list_head drv_node; ++ struct ucb1x00 *ucb; ++ struct ucb1x00_driver *drv; ++ void *priv; ++}; ++ ++struct ucb1x00_driver { ++ struct list_head node; ++ struct list_head devs; ++ int (*add)(struct ucb1x00_dev *dev); ++ void (*remove)(struct ucb1x00_dev *dev); ++ int (*suspend)(struct ucb1x00_dev *dev, pm_message_t state); ++ int (*resume)(struct ucb1x00_dev *dev); ++}; ++ ++#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev) ++ ++int ucb1x00_register_driver(struct ucb1x00_driver *); ++void ucb1x00_unregister_driver(struct ucb1x00_driver *); ++ ++/** ++ * ucb1x00_clkrate - return the UCB1x00 SIB clock rate ++ * @ucb: UCB1x00 structure describing chip ++ * ++ * Return the SIB clock rate in Hz. ++ */ ++static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb) ++{ ++ return mcp_get_sclk_rate(ucb->mcp); ++} ++ ++/** ++ * ucb1x00_enable - enable the UCB1x00 SIB clock ++ * @ucb: UCB1x00 structure describing chip ++ * ++ * Enable the SIB clock. This can be called multiple times. ++ */ ++static inline void ucb1x00_enable(struct ucb1x00 *ucb) ++{ ++ mcp_enable(ucb->mcp); ++} ++ ++/** ++ * ucb1x00_disable - disable the UCB1x00 SIB clock ++ * @ucb: UCB1x00 structure describing chip ++ * ++ * Disable the SIB clock. The SIB clock will only be disabled ++ * when the number of ucb1x00_enable calls match the number of ++ * ucb1x00_disable calls. ++ */ ++static inline void ucb1x00_disable(struct ucb1x00 *ucb) ++{ ++ mcp_disable(ucb->mcp); ++} ++ ++/** ++ * ucb1x00_reg_write - write a UCB1x00 register ++ * @ucb: UCB1x00 structure describing chip ++ * @reg: UCB1x00 4-bit register index to write ++ * @val: UCB1x00 16-bit value to write ++ * ++ * Write the UCB1x00 register @reg with value @val. The SIB ++ * clock must be running for this function to return. ++ */ ++static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val) ++{ ++ mcp_reg_write(ucb->mcp, reg, val); ++} ++ ++/** ++ * ucb1x00_reg_read - read a UCB1x00 register ++ * @ucb: UCB1x00 structure describing chip ++ * @reg: UCB1x00 4-bit register index to write ++ * ++ * Read the UCB1x00 register @reg and return its value. The SIB ++ * clock must be running for this function to return. ++ */ ++static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg) ++{ ++ return mcp_reg_read(ucb->mcp, reg); ++} ++/** ++ * ucb1x00_set_audio_divisor - ++ * @ucb: UCB1x00 structure describing chip ++ * @div: SIB clock divisor ++ */ ++static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div) ++{ ++ mcp_set_audio_divisor(ucb->mcp, div); ++} ++ ++/** ++ * ucb1x00_set_telecom_divisor - ++ * @ucb: UCB1x00 structure describing chip ++ * @div: SIB clock divisor ++ */ ++static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div) ++{ ++ mcp_set_telecom_divisor(ucb->mcp, div); ++} ++ ++void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int); ++void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int); ++unsigned int ucb1x00_io_read(struct ucb1x00 *ucb); ++ ++#define UCB_NOSYNC (0) ++#define UCB_SYNC (1) ++ ++unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync); ++void ucb1x00_adc_enable(struct ucb1x00 *ucb); ++void ucb1x00_adc_disable(struct ucb1x00 *ucb); ++ ++/* ++ * Which edges of the IRQ do you want to control today? ++ */ ++#define UCB_RISING (1 << 0) ++#define UCB_FALLING (1 << 1) ++ ++int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid); ++void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); ++void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges); ++int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid); ++ ++#endif +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0012-move-ucb1200-ts-driver.patch b/recipes/linux/linux-2.6.28/collie/0012-move-ucb1200-ts-driver.patch new file mode 100644 index 0000000000..c1aafef5e2 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0012-move-ucb1200-ts-driver.patch @@ -0,0 +1,981 @@ +From 9e0d71c4a6247d88d3b772f6b05bcaa39711a937 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 19:31:25 +0100 +Subject: [PATCH 12/23] move ucb1200-ts driver + +Move the touchscreen driver to drivers/input/touchscreen +where touchscreen drivers belong. + +Conflicts: + + drivers/input/touchscreen/Makefile + drivers/mfd/Kconfig + drivers/mfd/Makefile + +Conflicts: + + drivers/mfd/Kconfig + drivers/mfd/Makefile +--- + drivers/input/touchscreen/Kconfig | 7 + + drivers/input/touchscreen/Makefile | 1 + + drivers/input/touchscreen/ucb1x00-ts.c | 438 ++++++++++++++++++++++++++++++++ + drivers/mfd/Kconfig | 3 - + drivers/mfd/Makefile | 3 +- + drivers/mfd/ucb1x00-ts.c | 438 -------------------------------- + 6 files changed, 447 insertions(+), 443 deletions(-) + create mode 100644 drivers/input/touchscreen/ucb1x00-ts.c + delete mode 100644 drivers/mfd/ucb1x00-ts.c + +diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig +index 3d1ab8f..3ac8cd6 100644 +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -221,6 +221,13 @@ config TOUCHSCREEN_ATMEL_TSADCC + To compile this driver as a module, choose M here: the + module will be called atmel_tsadcc. + ++config TOUCHSCREEN_UCB1200_TS ++ tristate "Philips UCB1200 touchscreen" ++ depends on MCP_UCB1200 ++ help ++ This enabled support for the Pilips UCB1200 touchscreen interface ++ and compatible. ++ + config TOUCHSCREEN_UCB1400 + tristate "Philips UCB1400 touchscreen" + depends on AC97_BUS +diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile +index 15cf290..77ba930 100644 +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -25,6 +25,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o ++obj-$(CONFIG_TOUCHSCREEN_UCB1200_TS) += ucb1x00-ts.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o + obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o +diff --git a/drivers/input/touchscreen/ucb1x00-ts.c b/drivers/input/touchscreen/ucb1x00-ts.c +new file mode 100644 +index 0000000..b5feae9 +--- /dev/null ++++ b/drivers/input/touchscreen/ucb1x00-ts.c +@@ -0,0 +1,438 @@ ++/* ++ * Touchscreen driver for UCB1x00-based touchscreens ++ * ++ * Copyright (C) 2001 Russell King, All Rights Reserved. ++ * Copyright (C) 2005 Pavel Machek ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * 21-Jan-2002 <jco@ict.es> : ++ * ++ * Added support for synchronous A/D mode. This mode is useful to ++ * avoid noise induced in the touchpanel by the LCD, provided that ++ * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin. ++ * It is important to note that the signal connected to the ADCSYNC ++ * pin should provide pulses even when the LCD is blanked, otherwise ++ * a pen touch needed to unblank the LCD will never be read. ++ */ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/smp.h> ++#include <linux/sched.h> ++#include <linux/completion.h> ++#include <linux/delay.h> ++#include <linux/string.h> ++#include <linux/input.h> ++#include <linux/device.h> ++#include <linux/freezer.h> ++#include <linux/slab.h> ++#include <linux/kthread.h> ++#include <linux/mfd/ucb1x00.h> ++ ++#include <asm/dma.h> ++#include <mach/collie.h> ++#include <asm/mach-types.h> ++ ++ ++ ++struct ucb1x00_ts { ++ struct input_dev *idev; ++ struct ucb1x00 *ucb; ++ ++ wait_queue_head_t irq_wait; ++ struct task_struct *rtask; ++ u16 x_res; ++ u16 y_res; ++ ++ unsigned int restart:1; ++ unsigned int adcsync:1; ++}; ++ ++static int adcsync; ++ ++static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) ++{ ++ struct input_dev *idev = ts->idev; ++ ++ input_report_abs(idev, ABS_X, x); ++ input_report_abs(idev, ABS_Y, y); ++ input_report_abs(idev, ABS_PRESSURE, pressure); ++ input_sync(idev); ++} ++ ++static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) ++{ ++ struct input_dev *idev = ts->idev; ++ ++ input_report_abs(idev, ABS_PRESSURE, 0); ++ input_sync(idev); ++} ++ ++/* ++ * Switch to interrupt mode. ++ */ ++static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | ++ UCB_TS_CR_MODE_INT); ++} ++ ++/* ++ * Switch to pressure mode, and read pressure. We don't need to wait ++ * here, since both plates are being driven. ++ */ ++static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts) ++{ ++ if (machine_is_collie()) { ++ ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ udelay(55); ++ ++ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync); ++ } else { ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ ++ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); ++ } ++} ++ ++/* ++ * Switch to X position mode and measure Y plate. We switch the plate ++ * configuration in pressure mode, then switch to position mode. This ++ * gives a faster response time. Even so, we need to wait about 55us ++ * for things to stabilise. ++ */ ++static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts) ++{ ++ if (machine_is_collie()) ++ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); ++ else { ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ } ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ udelay(55); ++ ++ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); ++} ++ ++/* ++ * Switch to Y position mode and measure X plate. We switch the plate ++ * configuration in pressure mode, then switch to position mode. This ++ * gives a faster response time. Even so, we need to wait about 55us ++ * for things to stabilise. ++ */ ++static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts) ++{ ++ if (machine_is_collie()) ++ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); ++ else { ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ } ++ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ udelay(55); ++ ++ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync); ++} ++ ++/* ++ * Switch to X plate resistance mode. Set MX to ground, PX to ++ * supply. Measure current. ++ */ ++static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); ++} ++ ++/* ++ * Switch to Y plate resistance mode. Set MY to ground, PY to ++ * supply. Measure current. ++ */ ++static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); ++} ++ ++static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts) ++{ ++ unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR); ++ ++ if (machine_is_collie()) ++ return (!(val & (UCB_TS_CR_TSPX_LOW))); ++ else ++ return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)); ++} ++ ++/* ++ * This is a RT kernel thread that handles the ADC accesses ++ * (mainly so we can use semaphores in the UCB1200 core code ++ * to serialise accesses to the ADC). ++ */ ++static int ucb1x00_thread(void *_ts) ++{ ++ struct ucb1x00_ts *ts = _ts; ++ DECLARE_WAITQUEUE(wait, current); ++ int valid = 0; ++ ++ set_freezable(); ++ add_wait_queue(&ts->irq_wait, &wait); ++ while (!kthread_should_stop()) { ++ unsigned int x, y, p; ++ signed long timeout; ++ ++ ts->restart = 0; ++ ++ ucb1x00_adc_enable(ts->ucb); ++ ++ x = ucb1x00_ts_read_xpos(ts); ++ y = ucb1x00_ts_read_ypos(ts); ++ p = ucb1x00_ts_read_pressure(ts); ++ ++ /* ++ * Switch back to interrupt mode. ++ */ ++ ucb1x00_ts_mode_int(ts); ++ ucb1x00_adc_disable(ts->ucb); ++ ++ msleep(10); ++ ++ ucb1x00_enable(ts->ucb); ++ ++ ++ if (ucb1x00_ts_pen_down(ts)) { ++ set_current_state(TASK_INTERRUPTIBLE); ++ ++ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING); ++ ucb1x00_disable(ts->ucb); ++ ++ /* ++ * If we spat out a valid sample set last time, ++ * spit out a "pen off" sample here. ++ */ ++ if (valid) { ++ ucb1x00_ts_event_release(ts); ++ valid = 0; ++ } ++ ++ timeout = MAX_SCHEDULE_TIMEOUT; ++ } else { ++ ucb1x00_disable(ts->ucb); ++ ++ /* ++ * Filtering is policy. Policy belongs in user ++ * space. We therefore leave it to user space ++ * to do any filtering they please. ++ */ ++ if (!ts->restart) { ++ ucb1x00_ts_evt_add(ts, p, x, y); ++ valid = 1; ++ } ++ ++ set_current_state(TASK_INTERRUPTIBLE); ++ timeout = HZ / 100; ++ } ++ ++ try_to_freeze(); ++ ++ schedule_timeout(timeout); ++ } ++ ++ remove_wait_queue(&ts->irq_wait, &wait); ++ ++ ts->rtask = NULL; ++ return 0; ++} ++ ++/* ++ * We only detect touch screen _touches_ with this interrupt ++ * handler, and even then we just schedule our task. ++ */ ++static void ucb1x00_ts_irq(int idx, void *id) ++{ ++ struct ucb1x00_ts *ts = id; ++ ++ ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); ++ wake_up(&ts->irq_wait); ++} ++ ++static int ucb1x00_ts_open(struct input_dev *idev) ++{ ++ struct ucb1x00_ts *ts = input_get_drvdata(idev); ++ int ret = 0; ++ ++ BUG_ON(ts->rtask); ++ ++ init_waitqueue_head(&ts->irq_wait); ++ ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); ++ if (ret < 0) ++ goto out; ++ ++ /* ++ * If we do this at all, we should allow the user to ++ * measure and read the X and Y resistance at any time. ++ */ ++ ucb1x00_adc_enable(ts->ucb); ++ ts->x_res = ucb1x00_ts_read_xres(ts); ++ ts->y_res = ucb1x00_ts_read_yres(ts); ++ ucb1x00_adc_disable(ts->ucb); ++ ++ ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd"); ++ if (!IS_ERR(ts->rtask)) { ++ ret = 0; ++ } else { ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); ++ ts->rtask = NULL; ++ ret = -EFAULT; ++ } ++ ++ out: ++ return ret; ++} ++ ++/* ++ * Release touchscreen resources. Disable IRQs. ++ */ ++static void ucb1x00_ts_close(struct input_dev *idev) ++{ ++ struct ucb1x00_ts *ts = input_get_drvdata(idev); ++ ++ if (ts->rtask) ++ kthread_stop(ts->rtask); ++ ++ ucb1x00_enable(ts->ucb); ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ++ ucb1x00_disable(ts->ucb); ++} ++ ++#ifdef CONFIG_PM ++static int ucb1x00_ts_resume(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts = dev->priv; ++ ++ if (ts->rtask != NULL) { ++ /* ++ * Restart the TS thread to ensure the ++ * TS interrupt mode is set up again ++ * after sleep. ++ */ ++ ts->restart = 1; ++ wake_up(&ts->irq_wait); ++ } ++ return 0; ++} ++#else ++#define ucb1x00_ts_resume NULL ++#endif ++ ++ ++/* ++ * Initialisation. ++ */ ++static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts; ++ struct input_dev *idev; ++ int err; ++ ++ ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); ++ idev = input_allocate_device(); ++ if (!ts || !idev) { ++ err = -ENOMEM; ++ goto fail; ++ } ++ ++ ts->ucb = dev->ucb; ++ ts->idev = idev; ++ ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; ++ ++ idev->name = "Touchscreen panel"; ++ idev->id.product = ts->ucb->id; ++ idev->open = ucb1x00_ts_open; ++ idev->close = ucb1x00_ts_close; ++ ++ __set_bit(EV_ABS, idev->evbit); ++ __set_bit(ABS_X, idev->absbit); ++ __set_bit(ABS_Y, idev->absbit); ++ __set_bit(ABS_PRESSURE, idev->absbit); ++ ++ input_set_drvdata(idev, ts); ++ ++ err = input_register_device(idev); ++ if (err) ++ goto fail; ++ ++ dev->priv = ts; ++ ++ return 0; ++ ++ fail: ++ input_free_device(idev); ++ kfree(ts); ++ return err; ++} ++ ++static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts = dev->priv; ++ ++ input_unregister_device(ts->idev); ++ kfree(ts); ++} ++ ++static struct ucb1x00_driver ucb1x00_ts_driver = { ++ .add = ucb1x00_ts_add, ++ .remove = ucb1x00_ts_remove, ++ .resume = ucb1x00_ts_resume, ++}; ++ ++static int __init ucb1x00_ts_init(void) ++{ ++ return ucb1x00_register_driver(&ucb1x00_ts_driver); ++} ++ ++static void __exit ucb1x00_ts_exit(void) ++{ ++ ucb1x00_unregister_driver(&ucb1x00_ts_driver); ++} ++ ++module_param(adcsync, int, 0444); ++module_init(ucb1x00_ts_init); ++module_exit(ucb1x00_ts_exit); ++ ++MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); ++MODULE_DESCRIPTION("UCB1x00 touchscreen driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig +index 2572773..bbc137d 100644 +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -172,8 +172,5 @@ config MCP_UCB1200 + tristate "Support for UCB1200 / UCB1300" + depends on MCP + +-config MCP_UCB1200_TS +- tristate "Touchscreen interface support" +- depends on MCP_UCB1200 && INPUT + + endmenu +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 9a5ad8a..4981aff 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -24,11 +24,10 @@ obj-$(CONFIG_MFD_CORE) += mfd-core.o + obj-$(CONFIG_MCP) += mcp-core.o + obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o +-obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o + + ifeq ($(CONFIG_SA1100_ASSABET),y) + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o + endif + obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o + +-obj-$(CONFIG_PMIC_DA903X) += da903x.o +\ No newline at end of file ++obj-$(CONFIG_PMIC_DA903X) += da903x.o +diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c +deleted file mode 100644 +index b5feae9..0000000 +--- a/drivers/mfd/ucb1x00-ts.c ++++ /dev/null +@@ -1,438 +0,0 @@ +-/* +- * Touchscreen driver for UCB1x00-based touchscreens +- * +- * Copyright (C) 2001 Russell King, All Rights Reserved. +- * Copyright (C) 2005 Pavel Machek +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. +- * +- * 21-Jan-2002 <jco@ict.es> : +- * +- * Added support for synchronous A/D mode. This mode is useful to +- * avoid noise induced in the touchpanel by the LCD, provided that +- * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin. +- * It is important to note that the signal connected to the ADCSYNC +- * pin should provide pulses even when the LCD is blanked, otherwise +- * a pen touch needed to unblank the LCD will never be read. +- */ +-#include <linux/module.h> +-#include <linux/moduleparam.h> +-#include <linux/init.h> +-#include <linux/smp.h> +-#include <linux/sched.h> +-#include <linux/completion.h> +-#include <linux/delay.h> +-#include <linux/string.h> +-#include <linux/input.h> +-#include <linux/device.h> +-#include <linux/freezer.h> +-#include <linux/slab.h> +-#include <linux/kthread.h> +-#include <linux/mfd/ucb1x00.h> +- +-#include <asm/dma.h> +-#include <mach/collie.h> +-#include <asm/mach-types.h> +- +- +- +-struct ucb1x00_ts { +- struct input_dev *idev; +- struct ucb1x00 *ucb; +- +- wait_queue_head_t irq_wait; +- struct task_struct *rtask; +- u16 x_res; +- u16 y_res; +- +- unsigned int restart:1; +- unsigned int adcsync:1; +-}; +- +-static int adcsync; +- +-static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) +-{ +- struct input_dev *idev = ts->idev; +- +- input_report_abs(idev, ABS_X, x); +- input_report_abs(idev, ABS_Y, y); +- input_report_abs(idev, ABS_PRESSURE, pressure); +- input_sync(idev); +-} +- +-static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) +-{ +- struct input_dev *idev = ts->idev; +- +- input_report_abs(idev, ABS_PRESSURE, 0); +- input_sync(idev); +-} +- +-/* +- * Switch to interrupt mode. +- */ +-static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts) +-{ +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | +- UCB_TS_CR_MODE_INT); +-} +- +-/* +- * Switch to pressure mode, and read pressure. We don't need to wait +- * here, since both plates are being driven. +- */ +-static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts) +-{ +- if (machine_is_collie()) { +- ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0); +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW | +- UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); +- +- udelay(55); +- +- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync); +- } else { +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- +- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); +- } +-} +- +-/* +- * Switch to X position mode and measure Y plate. We switch the plate +- * configuration in pressure mode, then switch to position mode. This +- * gives a faster response time. Even so, we need to wait about 55us +- * for things to stabilise. +- */ +-static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts) +-{ +- if (machine_is_collie()) +- ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); +- else { +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- } +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); +- +- udelay(55); +- +- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync); +-} +- +-/* +- * Switch to Y position mode and measure X plate. We switch the plate +- * configuration in pressure mode, then switch to position mode. This +- * gives a faster response time. Even so, we need to wait about 55us +- * for things to stabilise. +- */ +-static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts) +-{ +- if (machine_is_collie()) +- ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); +- else { +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- } +- +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | +- UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); +- +- udelay(55); +- +- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPX, ts->adcsync); +-} +- +-/* +- * Switch to X plate resistance mode. Set MX to ground, PX to +- * supply. Measure current. +- */ +-static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts) +-{ +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); +-} +- +-/* +- * Switch to Y plate resistance mode. Set MY to ground, PY to +- * supply. Measure current. +- */ +-static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts) +-{ +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, +- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | +- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); +- return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); +-} +- +-static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts) +-{ +- unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR); +- +- if (machine_is_collie()) +- return (!(val & (UCB_TS_CR_TSPX_LOW))); +- else +- return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)); +-} +- +-/* +- * This is a RT kernel thread that handles the ADC accesses +- * (mainly so we can use semaphores in the UCB1200 core code +- * to serialise accesses to the ADC). +- */ +-static int ucb1x00_thread(void *_ts) +-{ +- struct ucb1x00_ts *ts = _ts; +- DECLARE_WAITQUEUE(wait, current); +- int valid = 0; +- +- set_freezable(); +- add_wait_queue(&ts->irq_wait, &wait); +- while (!kthread_should_stop()) { +- unsigned int x, y, p; +- signed long timeout; +- +- ts->restart = 0; +- +- ucb1x00_adc_enable(ts->ucb); +- +- x = ucb1x00_ts_read_xpos(ts); +- y = ucb1x00_ts_read_ypos(ts); +- p = ucb1x00_ts_read_pressure(ts); +- +- /* +- * Switch back to interrupt mode. +- */ +- ucb1x00_ts_mode_int(ts); +- ucb1x00_adc_disable(ts->ucb); +- +- msleep(10); +- +- ucb1x00_enable(ts->ucb); +- +- +- if (ucb1x00_ts_pen_down(ts)) { +- set_current_state(TASK_INTERRUPTIBLE); +- +- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING); +- ucb1x00_disable(ts->ucb); +- +- /* +- * If we spat out a valid sample set last time, +- * spit out a "pen off" sample here. +- */ +- if (valid) { +- ucb1x00_ts_event_release(ts); +- valid = 0; +- } +- +- timeout = MAX_SCHEDULE_TIMEOUT; +- } else { +- ucb1x00_disable(ts->ucb); +- +- /* +- * Filtering is policy. Policy belongs in user +- * space. We therefore leave it to user space +- * to do any filtering they please. +- */ +- if (!ts->restart) { +- ucb1x00_ts_evt_add(ts, p, x, y); +- valid = 1; +- } +- +- set_current_state(TASK_INTERRUPTIBLE); +- timeout = HZ / 100; +- } +- +- try_to_freeze(); +- +- schedule_timeout(timeout); +- } +- +- remove_wait_queue(&ts->irq_wait, &wait); +- +- ts->rtask = NULL; +- return 0; +-} +- +-/* +- * We only detect touch screen _touches_ with this interrupt +- * handler, and even then we just schedule our task. +- */ +-static void ucb1x00_ts_irq(int idx, void *id) +-{ +- struct ucb1x00_ts *ts = id; +- +- ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); +- wake_up(&ts->irq_wait); +-} +- +-static int ucb1x00_ts_open(struct input_dev *idev) +-{ +- struct ucb1x00_ts *ts = input_get_drvdata(idev); +- int ret = 0; +- +- BUG_ON(ts->rtask); +- +- init_waitqueue_head(&ts->irq_wait); +- ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); +- if (ret < 0) +- goto out; +- +- /* +- * If we do this at all, we should allow the user to +- * measure and read the X and Y resistance at any time. +- */ +- ucb1x00_adc_enable(ts->ucb); +- ts->x_res = ucb1x00_ts_read_xres(ts); +- ts->y_res = ucb1x00_ts_read_yres(ts); +- ucb1x00_adc_disable(ts->ucb); +- +- ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd"); +- if (!IS_ERR(ts->rtask)) { +- ret = 0; +- } else { +- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); +- ts->rtask = NULL; +- ret = -EFAULT; +- } +- +- out: +- return ret; +-} +- +-/* +- * Release touchscreen resources. Disable IRQs. +- */ +-static void ucb1x00_ts_close(struct input_dev *idev) +-{ +- struct ucb1x00_ts *ts = input_get_drvdata(idev); +- +- if (ts->rtask) +- kthread_stop(ts->rtask); +- +- ucb1x00_enable(ts->ucb); +- ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); +- ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); +- ucb1x00_disable(ts->ucb); +-} +- +-#ifdef CONFIG_PM +-static int ucb1x00_ts_resume(struct ucb1x00_dev *dev) +-{ +- struct ucb1x00_ts *ts = dev->priv; +- +- if (ts->rtask != NULL) { +- /* +- * Restart the TS thread to ensure the +- * TS interrupt mode is set up again +- * after sleep. +- */ +- ts->restart = 1; +- wake_up(&ts->irq_wait); +- } +- return 0; +-} +-#else +-#define ucb1x00_ts_resume NULL +-#endif +- +- +-/* +- * Initialisation. +- */ +-static int ucb1x00_ts_add(struct ucb1x00_dev *dev) +-{ +- struct ucb1x00_ts *ts; +- struct input_dev *idev; +- int err; +- +- ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); +- idev = input_allocate_device(); +- if (!ts || !idev) { +- err = -ENOMEM; +- goto fail; +- } +- +- ts->ucb = dev->ucb; +- ts->idev = idev; +- ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; +- +- idev->name = "Touchscreen panel"; +- idev->id.product = ts->ucb->id; +- idev->open = ucb1x00_ts_open; +- idev->close = ucb1x00_ts_close; +- +- __set_bit(EV_ABS, idev->evbit); +- __set_bit(ABS_X, idev->absbit); +- __set_bit(ABS_Y, idev->absbit); +- __set_bit(ABS_PRESSURE, idev->absbit); +- +- input_set_drvdata(idev, ts); +- +- err = input_register_device(idev); +- if (err) +- goto fail; +- +- dev->priv = ts; +- +- return 0; +- +- fail: +- input_free_device(idev); +- kfree(ts); +- return err; +-} +- +-static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) +-{ +- struct ucb1x00_ts *ts = dev->priv; +- +- input_unregister_device(ts->idev); +- kfree(ts); +-} +- +-static struct ucb1x00_driver ucb1x00_ts_driver = { +- .add = ucb1x00_ts_add, +- .remove = ucb1x00_ts_remove, +- .resume = ucb1x00_ts_resume, +-}; +- +-static int __init ucb1x00_ts_init(void) +-{ +- return ucb1x00_register_driver(&ucb1x00_ts_driver); +-} +- +-static void __exit ucb1x00_ts_exit(void) +-{ +- ucb1x00_unregister_driver(&ucb1x00_ts_driver); +-} +- +-module_param(adcsync, int, 0444); +-module_init(ucb1x00_ts_init); +-module_exit(ucb1x00_ts_exit); +- +-MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); +-MODULE_DESCRIPTION("UCB1x00 touchscreen driver"); +-MODULE_LICENSE("GPL"); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0013-add-collie-touchscreen-driver.patch b/recipes/linux/linux-2.6.28/collie/0013-add-collie-touchscreen-driver.patch new file mode 100644 index 0000000000..92159d5649 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0013-add-collie-touchscreen-driver.patch @@ -0,0 +1,528 @@ +From 40787f3e48d1cc1e63dc5dd6aeda720f688fc05e Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 20 Oct 2008 17:44:23 +0200 +Subject: [PATCH 13/23] add collie touchscreen driver + +--- + drivers/input/touchscreen/Kconfig | 6 + + drivers/input/touchscreen/Makefile | 1 + + drivers/input/touchscreen/collie-ts.c | 449 +++++++++++++++++++++++++++++++++ + drivers/mfd/Makefile | 1 - + include/linux/mfd/ucb1x00.h | 3 + + 5 files changed, 459 insertions(+), 1 deletions(-) + create mode 100644 drivers/input/touchscreen/collie-ts.c + +diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig +index 3ac8cd6..a9f89ed 100644 +--- a/drivers/input/touchscreen/Kconfig ++++ b/drivers/input/touchscreen/Kconfig +@@ -228,6 +228,12 @@ config TOUCHSCREEN_UCB1200_TS + This enabled support for the Pilips UCB1200 touchscreen interface + and compatible. + ++config TOUCHSCREEN_COLLIE_TS ++ tristate "Touchscreen collie support" ++ depends on MCP_UCB1200 && INPUT && !MCP_UCB1200_TS ++ help ++ Driver for touchscreen on collie - sharp sl-5500. ++ + config TOUCHSCREEN_UCB1400 + tristate "Philips UCB1400 touchscreen" + depends on AC97_BUS +diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile +index 77ba930..77715cd 100644 +--- a/drivers/input/touchscreen/Makefile ++++ b/drivers/input/touchscreen/Makefile +@@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o + obj-$(CONFIG_TOUCHSCREEN_UCB1200_TS) += ucb1x00-ts.o ++obj-$(CONFIG_TOUCHSCREEN_COLLIE_TS) += collie-ts.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o + obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o + wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o +diff --git a/drivers/input/touchscreen/collie-ts.c b/drivers/input/touchscreen/collie-ts.c +new file mode 100644 +index 0000000..c7c0272 +--- /dev/null ++++ b/drivers/input/touchscreen/collie-ts.c +@@ -0,0 +1,449 @@ ++/* ++ * Touchscreen driver for UCB1x00-based touchscreens ++ * ++ * Copyright (C) 2001 Russell King, All Rights Reserved. ++ * Copyright (C) 2005 Pavel Machek ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * 21-Jan-2002 <jco@ict.es> : ++ * ++ * Added support for synchronous A/D mode. This mode is useful to ++ * avoid noise induced in the touchpanel by the LCD, provided that ++ * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin. ++ * It is important to note that the signal connected to the ADCSYNC ++ * pin should provide pulses even when the LCD is blanked, otherwise ++ * a pen touch needed to unblank the LCD will never be read. ++ */ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/smp.h> ++#include <linux/smp_lock.h> ++#include <linux/sched.h> ++#include <linux/completion.h> ++#include <linux/delay.h> ++#include <linux/string.h> ++#include <linux/input.h> ++#include <linux/device.h> ++#include <linux/freezer.h> ++#include <linux/slab.h> ++#include <linux/kthread.h> ++#include <linux/semaphore.h> ++ ++#include <mach/dma.h> ++#include <mach/collie.h> ++#include <asm/mach-types.h> ++ ++#include <linux/mfd/ucb1x00.h> ++ ++struct ucb1x00_ts { ++ struct input_dev *idev; ++ struct ucb1x00 *ucb; ++ ++ wait_queue_head_t irq_wait; ++ struct task_struct *rtask; ++ u16 x_res; ++ u16 y_res; ++ ++ unsigned int adcsync:1; ++}; ++ ++static int adcsync; ++ ++/********************************** ++ ++ ................ ++ . . = 340 ++ . . ++ . ^. ++ . ^. ++ . ^. ++ . ^. ++ . . ++ . X. = 10 ++ . <<<<<<<< Y . ++ ................ ++ . Sharp =200 ++ . . ++ . - O - . ++ . . ++ ................ ++ ++**********************************/ ++ ++ ++static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) ++{ ++ struct input_dev *idev = ts->idev; ++ ++ input_report_abs(idev, ABS_X, x); ++ input_report_abs(idev, ABS_Y, y); ++ input_report_abs(idev, ABS_PRESSURE, pressure); ++ input_report_key(idev, BTN_TOUCH, 1); ++ input_sync(idev); ++} ++ ++static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) ++{ ++ struct input_dev *idev = ts->idev; ++ ++ input_report_abs(idev, ABS_PRESSURE, 0); ++ input_report_key(idev, BTN_TOUCH, 0); ++ input_sync(idev); ++} ++ ++/* ++ * Switch to interrupt mode. This set touchscreen to interrupt ++ * mode, so that chip is able to send interrupt. ++ */ ++static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND | ++ UCB_TS_CR_MODE_INT); ++} ++ ++/* ++ * Switch to pressure mode, and read pressure. We don't need to wait ++ * here, since both plates are being driven. ++ * ++ * set_read_pressure() in sharp code ++ */ ++static inline void ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_AD2 | ++ UCB_ADC_SYNC_ENA); ++ udelay(100); ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_AD2 | ++ UCB_ADC_SYNC_ENA | UCB_ADC_START); ++} ++ ++/* ++ * Switch to X position mode and measure Y plate. We switch the plate ++ * configuration in pressure mode, then switch to position mode. This ++ * gives a faster response time. Even so, we need to wait about 55us ++ * for things to stabilise. ++ */ ++static inline void ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA); ++ udelay(100); ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA | ++ UCB_ADC_START); ++} ++ ++/* ++ * Switch to Y position mode and measure X plate. We switch the plate ++ * configuration in pressure mode, then switch to position mode. This ++ * gives a faster response time. Even so, we need to wait about 55us ++ * for things to stabilise. ++ */ ++static inline void ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); ++ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA); ++ ++ ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA); ++ udelay(100); ++ ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | ++ UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA | ++ UCB_ADC_START); ++} ++ ++/* ++ * Switch to X plate resistance mode. Set MX to ground, PX to ++ * supply. Measure current. ++ */ ++static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); ++} ++ ++/* ++ * Switch to Y plate resistance mode. Set MY to ground, PY to ++ * supply. Measure current. ++ */ ++static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts) ++{ ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, ++ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW | ++ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA); ++ return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync); ++} ++ ++/* ++ * This is a RT kernel thread that handles the ADC accesses ++ * (mainly so we can use semaphores in the UCB1200 core code ++ * to serialise accesses to the ADC). ++ */ ++static int ucb1x00_thread(void *_ts) ++{ ++ struct ucb1x00_ts *ts = _ts; ++ struct task_struct *tsk = current; ++ DECLARE_WAITQUEUE(wait, tsk); ++ int state; ++ ++ /* ++ * We could run as a real-time thread. However, thus far ++ * this doesn't seem to be necessary. ++ */ ++ ++ add_wait_queue(&ts->irq_wait, &wait); ++ ++ while (!kthread_should_stop()) { ++ unsigned int data[3]; ++ ++ for (state=0; state<3; state++) { ++ ++ ucb1x00_adc_enable(ts->ucb); ++ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING); ++ switch (state) { ++ /* Order matters here; last measurement seems to be more noisy then the ++ rest, and we care about pressure least */ ++ case 2: ucb1x00_ts_read_pressure(ts); ++ break; ++ case 0: ucb1x00_ts_read_ypos(ts); ++ break; ++ case 1: ucb1x00_ts_read_xpos(ts); ++ break; ++ } ++ /* wait for adc */ ++ try_to_freeze(); ++ schedule_timeout(1000 * HZ); ++ ucb1x00_disable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING); ++ data[state] = UCB_ADC_DAT(ucb1x00_reg_read(ts->ucb, UCB_ADC_DATA)); ++ ucb1x00_adc_disable(ts->ucb); ++ } ++ ++ /* If not pressed any more, try to sleep! */ ++ if (data[2] < 300) { ++ set_task_state(tsk, TASK_INTERRUPTIBLE); ++ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING); ++ ucb1x00_ts_mode_int(ts); ++ ucb1x00_disable(ts->ucb); ++ ucb1x00_ts_event_release(ts); ++ try_to_freeze(); ++ schedule_timeout(1000 * HZ); ++ ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING); ++ ucb1x00_enable(ts->ucb); ++ } else { ++ ucb1x00_ts_evt_add(ts, data[2], data[1], data[0]); ++ } ++ ucb1x00_disable(ts->ucb); ++ msleep(20); ++ ucb1x00_enable(ts->ucb); ++ } ++ ++ remove_wait_queue(&ts->irq_wait, &wait); ++ ++ ts->rtask = NULL; ++ return 0; ++} ++ ++/* ++ * We only detect touch screen _touches_ with this interrupt ++ * handler, and even then we just schedule our task. ++ */ ++static void ucb1x00_ts_irq(int idx, void *id) ++{ ++ struct ucb1x00_ts *ts = id; ++ wake_up(&ts->irq_wait); ++} ++ ++static void ucb1x00_adc_irq(int idx, void *id) ++{ ++ struct ucb1x00_ts *ts = id; ++ wake_up(&ts->irq_wait); ++} ++ ++static int ucb1x00_ts_open(struct input_dev *idev) ++{ ++ struct ucb1x00_ts *ts = input_get_drvdata(idev); ++ int ret = 0; ++ ++ BUG_ON(ts->rtask); ++ ++ init_waitqueue_head(&ts->irq_wait); ++ ++ ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); ++ if (ret < 0) ++ return ret; ++ ++ ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_ADC, ucb1x00_adc_irq, ts); ++ if (ret < 0) { ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); ++ return ret; ++ } ++ ++ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING); ++ ++ /* ++ * If we do this at all, we should allow the user to ++ * measure and read the X and Y resistance at any time. ++ */ ++ ucb1x00_adc_enable(ts->ucb); ++ ts->x_res = ucb1x00_ts_read_xres(ts); ++ ts->y_res = ucb1x00_ts_read_yres(ts); ++ ucb1x00_adc_disable(ts->ucb); ++ ++ if (machine_is_collie()) { ++ ucb1x00_io_set_dir(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK); ++ } ++ ++ ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd"); ++ if (!IS_ERR(ts->rtask)) { ++ ret = 0; ++ } else { ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); ++ ts->rtask = NULL; ++ ret = -EFAULT; ++ } ++ ++ return ret; ++} ++ ++/* ++ * Release touchscreen resources. Disable IRQs. ++ */ ++static void ucb1x00_ts_close(struct input_dev *idev) ++{ ++ struct ucb1x00_ts *ts = input_get_drvdata(idev); ++ ++ if (ts->rtask) ++ kthread_stop(ts->rtask); ++ ++ ucb1x00_enable(ts->ucb); ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); ++ ucb1x00_free_irq(ts->ucb, UCB_IRQ_ADC, ts); ++ ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ++ ucb1x00_disable(ts->ucb); ++} ++ ++#ifdef CONFIG_PM ++static int ucb1x00_ts_resume(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts = dev->priv; ++ ++ if (ts->rtask != NULL) { ++ /* ++ * Restart the TS thread to ensure the ++ * TS interrupt mode is set up again ++ * after sleep. ++ */ ++ wake_up(&ts->irq_wait); ++ } ++ return 0; ++} ++#else ++#define ucb1x00_ts_resume NULL ++#endif ++ ++ ++/* ++ * Initialisation. ++ */ ++static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts; ++ struct input_dev *idev; ++ int err; ++ ++ ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); ++ idev = input_allocate_device(); ++ if (!ts || !idev) { ++ err = -ENOMEM; ++ goto fail; ++ } ++ ++ ts->ucb = dev->ucb; ++ ts->idev = idev; ++ ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; ++ ++ input_set_drvdata(idev, ts); ++ idev->name = "Touchscreen panel"; ++ idev->id.product = ts->ucb->id; ++ idev->open = ucb1x00_ts_open; ++ idev->close = ucb1x00_ts_close; ++ ++ __set_bit(EV_ABS, idev->evbit); ++ __set_bit(ABS_X, idev->absbit); ++ __set_bit(ABS_Y, idev->absbit); ++ __set_bit(ABS_PRESSURE, idev->absbit); ++ ++ input_set_abs_params(ts->idev, ABS_X, 0, 450, 0, 0); ++ input_set_abs_params(ts->idev, ABS_Y, 200, 800, 0, 0); ++ input_set_abs_params(ts->idev, ABS_PRESSURE, 400, 800, 0, 0); ++ ++ ++ err = input_register_device(idev); ++ if (err) ++ goto fail; ++ ++ dev->priv = ts; ++ ++ return 0; ++ ++ fail: ++ input_free_device(idev); ++ kfree(ts); ++ return err; ++} ++ ++static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) ++{ ++ struct ucb1x00_ts *ts = dev->priv; ++ ++ input_unregister_device(ts->idev); ++ kfree(ts); ++} ++ ++static struct ucb1x00_driver ucb1x00_ts_driver = { ++ .add = ucb1x00_ts_add, ++ .remove = ucb1x00_ts_remove, ++ .resume = ucb1x00_ts_resume, ++}; ++ ++static int __init ucb1x00_ts_init(void) ++{ ++ return ucb1x00_register_driver(&ucb1x00_ts_driver); ++} ++ ++static void __exit ucb1x00_ts_exit(void) ++{ ++ ucb1x00_unregister_driver(&ucb1x00_ts_driver); ++} ++ ++module_param(adcsync, int, 0444); ++module_init(ucb1x00_ts_init); ++module_exit(ucb1x00_ts_exit); ++ ++MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); ++MODULE_DESCRIPTION("UCB1x00 touchscreen driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile +index 4981aff..7bbba6e 100644 +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -24,7 +24,6 @@ obj-$(CONFIG_MFD_CORE) += mfd-core.o + obj-$(CONFIG_MCP) += mcp-core.o + obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o +- + ifeq ($(CONFIG_SA1100_ASSABET),y) + obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o + endif +diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h +index eac3463..70eb763 100644 +--- a/include/linux/mfd/ucb1x00.h ++++ b/include/linux/mfd/ucb1x00.h +@@ -35,7 +35,10 @@ + #define UCB_IE_TCLIP (1 << 14) + #define UCB_IE_ACLIP (1 << 15) + ++/* UCB1200 irqs */ ++#define UCB_IRQ_ADC 11 + #define UCB_IRQ_TSPX 12 ++#define UCB_IRQ_TSMX 13 + + #define UCB_TC_A 0x05 + #define UCB_TC_A_LOOP (1 << 7) /* UCB1200 */ +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0014-collie-locomo-led-change-default-trigger.patch b/recipes/linux/linux-2.6.28/collie/0014-collie-locomo-led-change-default-trigger.patch new file mode 100644 index 0000000000..4d2828e53a --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0014-collie-locomo-led-change-default-trigger.patch @@ -0,0 +1,27 @@ +From 047e4432e024fbec1e308e3c496822f52ce63ecb Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 13:21:42 +0100 +Subject: [PATCH 14/23] collie: locomo-led change default trigger + +Collie uses now the powersupply framework. Change the +default led-trigger of locomo-led to reflect that. +--- + drivers/leds/leds-locomo.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c +index 5d91362..1f7c10f 100644 +--- a/drivers/leds/leds-locomo.c ++++ b/drivers/leds/leds-locomo.c +@@ -44,7 +44,7 @@ static void locomoled_brightness_set1(struct led_classdev *led_cdev, + + static struct led_classdev locomo_led0 = { + .name = "locomo:amber:charge", +- .default_trigger = "sharpsl-charge", ++ .default_trigger = "main-battery-charging", + .brightness_set = locomoled_brightness_set0, + }; + +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0015-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch b/recipes/linux/linux-2.6.28/collie/0015-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch new file mode 100644 index 0000000000..99d0314a46 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0015-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch @@ -0,0 +1,43 @@ +From 87e4ecb2702d0d1a800da0ba81cd867b0f150410 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Mon, 9 Feb 2009 23:14:44 +0100 +Subject: [PATCH 15/23] SA1100: make gpio_to_irq and reverse a macro + +The function can't be used for static initialisations so +convert them to macros. +--- + arch/arm/mach-sa1100/include/mach/gpio.h | 19 ++++--------------- + 1 files changed, 4 insertions(+), 15 deletions(-) + +diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h +index 582a0c9..7befc10 100644 +--- a/arch/arm/mach-sa1100/include/mach/gpio.h ++++ b/arch/arm/mach-sa1100/include/mach/gpio.h +@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value) + + #define gpio_cansleep __gpio_cansleep + +-static inline unsigned gpio_to_irq(unsigned gpio) +-{ +- if (gpio < 11) +- return IRQ_GPIO0 + gpio; +- else +- return IRQ_GPIO11 - 11 + gpio; +-} +- +-static inline unsigned irq_to_gpio(unsigned irq) +-{ +- if (irq < IRQ_GPIO11_27) +- return irq - IRQ_GPIO0; +- else +- return irq - IRQ_GPIO11 + 11; +-} ++#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \ ++ (IRQ_GPIO11 - 11 + gpio)) ++#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \ ++ (irq - IRQ_GPIO11 + 11)) + + #endif +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0016-add-gpiolib-support-to-ucb1x00.patch b/recipes/linux/linux-2.6.28/collie/0016-add-gpiolib-support-to-ucb1x00.patch new file mode 100644 index 0000000000..aab08a66c9 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0016-add-gpiolib-support-to-ucb1x00.patch @@ -0,0 +1,242 @@ +From 1de1b5c2860d889a9422f187ad90d8e38b2431fd Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 14:50:56 +0100 +Subject: [PATCH 16/23] add gpiolib support to ucb1x00 + +The old access methods to the gpios will be removed when +all users has been converted. (mainly ucb1x00-ts) +--- + arch/arm/mach-sa1100/include/mach/mcp.h | 1 + + drivers/mfd/mcp-sa11x0.c | 1 + + drivers/mfd/ucb1x00-core.c | 87 ++++++++++++++++++++++++++++++- + include/linux/mfd/mcp.h | 1 + + include/linux/mfd/ucb1x00.h | 3 + + 5 files changed, 91 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h +index fb8b09a..ed1a331 100644 +--- a/arch/arm/mach-sa1100/include/mach/mcp.h ++++ b/arch/arm/mach-sa1100/include/mach/mcp.h +@@ -16,6 +16,7 @@ struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; ++ int gpio_base; + }; + + #endif +diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c +index 88c81cf..dfa59eb 100644 +--- a/drivers/mfd/mcp-sa11x0.c ++++ b/drivers/mfd/mcp-sa11x0.c +@@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; ++ mcp->gpio_base = data->gpio_base; + + platform_set_drvdata(pdev, mcp); + +diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c +index bc2c1ba..b9c3f3d 100644 +--- a/drivers/mfd/ucb1x00-core.c ++++ b/drivers/mfd/ucb1x00-core.c +@@ -25,11 +25,11 @@ + #include <linux/device.h> + #include <linux/mutex.h> + #include <linux/mfd/ucb1x00.h> ++#include <linux/gpio.h> + + #include <asm/dma.h> + #include <mach/hardware.h> + +- + static DEFINE_MUTEX(ucb1x00_mutex); + static LIST_HEAD(ucb1x00_drivers); + static LIST_HEAD(ucb1x00_devices); +@@ -107,6 +107,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) + return ucb1x00_reg_read(ucb, UCB_IO_DATA); + } + ++static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value) ++{ ++ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ucb->io_lock, flags); ++ if (value) ++ ucb->io_out |= 1 << offset; ++ else ++ ucb->io_out &= ~(1 << offset); ++ ++ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ++ spin_unlock_irqrestore(&ucb->io_lock, flags); ++} ++ ++static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); ++ return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset); ++} ++ ++static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ucb->io_lock, flags); ++ ucb->io_dir &= ~(1 << offset); ++ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); ++ spin_unlock_irqrestore(&ucb->io_lock, flags); ++ ++ return 0; ++} ++ ++static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset ++ , int value) ++{ ++ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ucb->io_lock, flags); ++ ucb->io_dir |= (1 << offset); ++ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); ++ ++ if (value) ++ ucb->io_out |= 1 << offset; ++ else ++ ucb->io_out &= ~(1 << offset); ++ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ++ spin_unlock_irqrestore(&ucb->io_lock, flags); ++ ++ return 0; ++} ++ + /* + * UCB1300 data sheet says we must: + * 1. enable ADC => 5us (including reference startup time) +@@ -475,6 +529,7 @@ static int ucb1x00_probe(struct mcp *mcp) + struct ucb1x00_driver *drv; + unsigned int id; + int ret = -ENODEV; ++ int temp; + + mcp_enable(mcp); + id = mcp_reg_read(mcp, UCB_ID); +@@ -507,12 +562,27 @@ static int ucb1x00_probe(struct mcp *mcp) + goto err_free; + } + ++ ucb->gpio.base = -1; ++ if (mcp->gpio_base != 0) { ++ ucb->gpio.label = dev_name(&ucb->dev); ++ ucb->gpio.base = mcp->gpio_base; ++ ucb->gpio.ngpio = 10; ++ ucb->gpio.set = ucb1x00_gpio_set; ++ ucb->gpio.get = ucb1x00_gpio_get; ++ ucb->gpio.direction_input = ucb1x00_gpio_direction_input; ++ ucb->gpio.direction_output = ucb1x00_gpio_direction_output; ++ ret = gpiochip_add(&ucb->gpio); ++ if (ret) ++ goto err_free; ++ } else ++ dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); ++ + ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, + "UCB1x00", ucb); + if (ret) { + printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", + ucb->irq, ret); +- goto err_free; ++ goto err_gpio; + } + + mcp_set_drvdata(mcp, ucb); +@@ -521,6 +591,7 @@ static int ucb1x00_probe(struct mcp *mcp) + if (ret) + goto err_irq; + ++ + INIT_LIST_HEAD(&ucb->devs); + mutex_lock(&ucb1x00_mutex); + list_add(&ucb->node, &ucb1x00_devices); +@@ -528,10 +599,14 @@ static int ucb1x00_probe(struct mcp *mcp) + ucb1x00_add_dev(ucb, drv); + } + mutex_unlock(&ucb1x00_mutex); ++ + goto out; + + err_irq: + free_irq(ucb->irq, ucb); ++ err_gpio: ++ if (ucb->gpio.base != -1) ++ temp = gpiochip_remove(&ucb->gpio); + err_free: + kfree(ucb); + err_disable: +@@ -544,6 +619,7 @@ static void ucb1x00_remove(struct mcp *mcp) + { + struct ucb1x00 *ucb = mcp_get_drvdata(mcp); + struct list_head *l, *n; ++ int ret; + + mutex_lock(&ucb1x00_mutex); + list_del(&ucb->node); +@@ -553,6 +629,12 @@ static void ucb1x00_remove(struct mcp *mcp) + } + mutex_unlock(&ucb1x00_mutex); + ++ if (ucb->gpio.base != -1) { ++ ret = gpiochip_remove(&ucb->gpio); ++ if (ret) ++ dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); ++ } ++ + free_irq(ucb->irq, ucb); + device_unregister(&ucb->dev); + } +@@ -603,6 +685,7 @@ static int ucb1x00_resume(struct mcp *mcp) + struct ucb1x00 *ucb = mcp_get_drvdata(mcp); + struct ucb1x00_dev *dev; + ++ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + mutex_lock(&ucb1x00_mutex); + list_for_each_entry(dev, &ucb->devs, dev_node) { + if (dev->drv->resume) +diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h +index be95e09..ee49670 100644 +--- a/include/linux/mfd/mcp.h ++++ b/include/linux/mfd/mcp.h +@@ -26,6 +26,7 @@ struct mcp { + dma_device_t dma_telco_rd; + dma_device_t dma_telco_wr; + struct device attached_device; ++ int gpio_base; + }; + + struct mcp_ops { +diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h +index 70eb763..b13171e 100644 +--- a/include/linux/mfd/ucb1x00.h ++++ b/include/linux/mfd/ucb1x00.h +@@ -11,6 +11,8 @@ + #define UCB1200_H + + #include <linux/mfd/mcp.h> ++#include <linux/gpio.h> ++ + #define UCB_IO_DATA 0x00 + #define UCB_IO_DIR 0x01 + +@@ -126,6 +128,7 @@ struct ucb1x00 { + struct device dev; + struct list_head node; + struct list_head devs; ++ struct gpio_chip gpio; + }; + + struct ucb1x00_driver; +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0017-collie-convert-to-gpiolib-for-ucb1x00.patch b/recipes/linux/linux-2.6.28/collie/0017-collie-convert-to-gpiolib-for-ucb1x00.patch new file mode 100644 index 0000000000..c08c21a977 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0017-collie-convert-to-gpiolib-for-ucb1x00.patch @@ -0,0 +1,137 @@ +From c1bf0dcce68a5e01213e18c9ca1fd49efad4ddff Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 18:15:34 +0100 +Subject: [PATCH 17/23] collie: convert to gpiolib for ucb1x00 + +Only the parts used for collie_battery are converted. +The rest will be cleaned up later. + +Conflicts: + + arch/arm/mach-sa1100/collie.c + arch/arm/mach-sa1100/include/mach/collie.h +--- + arch/arm/mach-sa1100/collie.c | 3 +- + arch/arm/mach-sa1100/include/mach/collie.h | 68 ++++++++++++++------------- + 2 files changed, 37 insertions(+), 34 deletions(-) + +diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c +index ec673b8..4b52f30 100644 +--- a/arch/arm/mach-sa1100/collie.c ++++ b/arch/arm/mach-sa1100/collie.c +@@ -87,6 +87,7 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { + static struct mcp_plat_data collie_mcp_data = { + .mccr0 = MCCR0_ADM | MCCR0_ExtClk, + .sclk_rate = 9216000, ++ .gpio_base = COLLIE_TC35143_GPIO_BASE, + }; + + #ifdef CONFIG_SHARP_LOCOMO +@@ -256,7 +257,7 @@ static void __init collie_init(void) + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | + PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; + +- PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | ++ PWER = COLLIE_GPIO_AC_IN_ | COLLIE_GPIO_CO_ | COLLIE_GPIO_ON_KEY | + COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + + PGSR = COLLIE_GPIO_nREMOCON_ON; +diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h +index 799c930..bba8978 100644 +--- a/arch/arm/mach-sa1100/include/mach/collie.h ++++ b/arch/arm/mach-sa1100/include/mach/collie.h +@@ -15,7 +15,7 @@ + + + #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) +-#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 ++#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE) + #define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 + #define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13 + #define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14 +@@ -25,28 +25,29 @@ + #define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7) + #define COLLIE_GPIO_LB_VOL_CHG (COLLIE_SCOOP_GPIO_BASE + 8) + +-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ ++#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ + COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON ) +-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ +- COLLIE_SCP_CHARGE_ON ) ++#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R) + + /* GPIOs for which the generic definition doesn't say much */ + +-#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0) +-#define COLLIE_GPIO_AC_IN GPIO_GPIO (1) +-#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11) +-#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14) +-#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15) +-#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16) +-#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17) +-#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18) +-#define COLLIE_GPIO_CO GPIO_GPIO (20) +-#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21) +-#define COLLIE_GPIO_CF_CD GPIO_GPIO (22) +-#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23) +-#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24) +-#define COLLIE_GPIO_GA_INT GPIO_GPIO (25) +-#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26) ++#define COLLIE_GPIO_ON_KEY GPIO_GPIO(0) ++#define COLLIE_GPIO_AC_IN (1) ++#define COLLIE_GPIO_AC_IN_ GPIO_GPIO(1) ++#define COLLIE_GPIO_SDIO_INT GPIO_GPIO(11) ++#define COLLIE_GPIO_CF_IRQ GPIO_GPIO(14) ++#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15) ++#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16) ++#define COLLIE_GPIO_nMIC_ON GPIO_GPIO(17) ++#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18) ++#define COLLIE_GPIO_CO (20) ++#define COLLIE_GPIO_CO_ GPIO_GPIO(20) ++#define COLLIE_GPIO_MCP_CLK GPIO_GPIO(21) ++#define COLLIE_GPIO_CF_CD GPIO_GPIO(22) ++#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO(23) ++#define COLLIE_GPIO_WAKEUP GPIO_GPIO(24) ++#define COLLIE_GPIO_GA_INT GPIO_GPIO(25) ++#define COLLIE_GPIO_MAIN_BAT_LOW (26) + + /* Interrupts */ + +@@ -70,19 +71,20 @@ + #define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14 + + /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */ +-#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */ +-#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */ +-#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */ +-#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */ +-#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */ +-#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */ +-#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */ +-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */ +-#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */ +-#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */ +-#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */ +-#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 ) +-#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \ +- UCB_IO_7 | UCB_IO_8 | UCB_IO_9 ) ++#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13) ++#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 ++#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 ++#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 ++#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 ++#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 ++#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 ++#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 ++#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 ++#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7) ++#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8) ++#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9) ++#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5) ++#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \ ++ | UCB_IO_6) + + #endif +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0018-collie-add-battery-driver.patch b/recipes/linux/linux-2.6.28/collie/0018-collie-add-battery-driver.patch new file mode 100644 index 0000000000..b28db63d87 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0018-collie-add-battery-driver.patch @@ -0,0 +1,473 @@ +From a2cf77eaf64b201a00b9682c25596ef0bcda8dc4 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 18:16:03 +0100 +Subject: [PATCH 18/23] collie: add battery driver + +This driver is based on tosa_battery.c. + +Conflicts: + + drivers/power/Makefile +--- + drivers/power/Kconfig | 7 + + drivers/power/Makefile | 1 + + drivers/power/collie_battery.c | 418 ++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 426 insertions(+), 0 deletions(-) + create mode 100644 drivers/power/collie_battery.c + +diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig +index 8e0c2b4..a945046 100644 +--- a/drivers/power/Kconfig ++++ b/drivers/power/Kconfig +@@ -56,6 +56,13 @@ config BATTERY_TOSA + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + ++config BATTERY_COLLIE ++ tristate "Sharp SL-5500 (collie) battery" ++ depends on SA1100_COLLIE && MCP_UCB1200 ++ help ++ Say Y to enable support for the battery on the Sharp Zaurus ++ SL-5500 (collie) models. ++ + config BATTERY_WM97XX + bool "WM97xx generic battery driver" + depends on TOUCHSCREEN_WM97XX=y +diff --git a/drivers/power/Makefile b/drivers/power/Makefile +index e8f1ece..51a7263 100644 +--- a/drivers/power/Makefile ++++ b/drivers/power/Makefile +@@ -21,5 +21,6 @@ obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o + obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o + obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o + obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o ++obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o + obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o + obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o +diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c +new file mode 100644 +index 0000000..039f41a +--- /dev/null ++++ b/drivers/power/collie_battery.c +@@ -0,0 +1,418 @@ ++/* ++ * Battery and Power Management code for the Sharp SL-5x00 ++ * ++ * Copyright (C) 2009 Thomas Kunze ++ * ++ * based on tosa_battery.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/power_supply.h> ++#include <linux/delay.h> ++#include <linux/spinlock.h> ++#include <linux/interrupt.h> ++#include <linux/gpio.h> ++#include <linux/mfd/ucb1x00.h> ++ ++#include <asm/mach/sharpsl_param.h> ++#include <asm/mach-types.h> ++#include <mach/collie.h> ++ ++static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ ++static struct work_struct bat_work; ++static struct ucb1x00 *ucb; ++ ++struct collie_bat { ++ int status; ++ struct power_supply psy; ++ int full_chrg; ++ ++ struct mutex work_lock; /* protects data */ ++ ++ bool (*is_present)(struct collie_bat *bat); ++ int gpio_full; ++ int gpio_charge_on; ++ ++ int technology; ++ ++ int gpio_bat; ++ int adc_bat; ++ int adc_bat_divider; ++ int bat_max; ++ int bat_min; ++ ++ int gpio_temp; ++ int adc_temp; ++ int adc_temp_divider; ++}; ++ ++static struct collie_bat collie_bat_main; ++ ++static unsigned long collie_read_bat(struct collie_bat *bat) ++{ ++ unsigned long value = 0; ++ ++ if (bat->gpio_bat < 0 || bat->adc_bat < 0) ++ return 0; ++ mutex_lock(&bat_lock); ++ gpio_set_value(bat->gpio_bat, 1); ++ msleep(5); ++ ucb1x00_adc_enable(ucb); ++ value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC); ++ ucb1x00_adc_disable(ucb); ++ gpio_set_value(bat->gpio_bat, 0); ++ mutex_unlock(&bat_lock); ++ value = value * 1000000 / bat->adc_bat_divider; ++ ++ return value; ++} ++ ++static unsigned long collie_read_temp(struct collie_bat *bat) ++{ ++ unsigned long value = 0; ++ if (bat->gpio_temp < 0 || bat->adc_temp < 0) ++ return 0; ++ ++ mutex_lock(&bat_lock); ++ gpio_set_value(bat->gpio_temp, 1); ++ msleep(5); ++ ucb1x00_adc_enable(ucb); ++ value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC); ++ ucb1x00_adc_disable(ucb); ++ gpio_set_value(bat->gpio_temp, 0); ++ mutex_unlock(&bat_lock); ++ ++ value = value * 10000 / bat->adc_temp_divider; ++ ++ return value; ++} ++ ++static int collie_bat_get_property(struct power_supply *psy, ++ enum power_supply_property psp, ++ union power_supply_propval *val) ++{ ++ int ret = 0; ++ struct collie_bat *bat = container_of(psy, struct collie_bat, psy); ++ ++ if (bat->is_present && !bat->is_present(bat) ++ && psp != POWER_SUPPLY_PROP_PRESENT) { ++ return -ENODEV; ++ } ++ ++ switch (psp) { ++ case POWER_SUPPLY_PROP_STATUS: ++ val->intval = bat->status; ++ break; ++ case POWER_SUPPLY_PROP_TECHNOLOGY: ++ val->intval = bat->technology; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_NOW: ++ val->intval = collie_read_bat(bat); ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MAX: ++ if (bat->full_chrg == -1) ++ val->intval = bat->bat_max; ++ else ++ val->intval = bat->full_chrg; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: ++ val->intval = bat->bat_max; ++ break; ++ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: ++ val->intval = bat->bat_min; ++ break; ++ case POWER_SUPPLY_PROP_TEMP: ++ val->intval = collie_read_temp(bat); ++ break; ++ case POWER_SUPPLY_PROP_PRESENT: ++ val->intval = bat->is_present ? bat->is_present(bat) : 1; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ return ret; ++} ++ ++static void collie_bat_external_power_changed(struct power_supply *psy) ++{ ++ schedule_work(&bat_work); ++} ++ ++static irqreturn_t collie_bat_gpio_isr(int irq, void *data) ++{ ++ pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); ++ schedule_work(&bat_work); ++ return IRQ_HANDLED; ++} ++ ++static void collie_bat_update(struct collie_bat *bat) ++{ ++ int old; ++ struct power_supply *psy = &bat->psy; ++ ++ mutex_lock(&bat->work_lock); ++ ++ old = bat->status; ++ ++ if (bat->is_present && !bat->is_present(bat)) { ++ printk(KERN_NOTICE "%s not present\n", psy->name); ++ bat->status = POWER_SUPPLY_STATUS_UNKNOWN; ++ bat->full_chrg = -1; ++ } else if (power_supply_am_i_supplied(psy)) { ++ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { ++ gpio_set_value(bat->gpio_charge_on, 1); ++ mdelay(15); ++ } ++ ++ if (gpio_get_value(bat->gpio_full)) { ++ if (old == POWER_SUPPLY_STATUS_CHARGING || ++ bat->full_chrg == -1) ++ bat->full_chrg = collie_read_bat(bat); ++ ++ gpio_set_value(bat->gpio_charge_on, 0); ++ bat->status = POWER_SUPPLY_STATUS_FULL; ++ } else { ++ gpio_set_value(bat->gpio_charge_on, 1); ++ bat->status = POWER_SUPPLY_STATUS_CHARGING; ++ } ++ } else { ++ gpio_set_value(bat->gpio_charge_on, 0); ++ bat->status = POWER_SUPPLY_STATUS_DISCHARGING; ++ } ++ ++ if (old != bat->status) ++ power_supply_changed(psy); ++ ++ mutex_unlock(&bat->work_lock); ++} ++ ++static void collie_bat_work(struct work_struct *work) ++{ ++ collie_bat_update(&collie_bat_main); ++} ++ ++ ++static enum power_supply_property collie_bat_main_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX, ++ POWER_SUPPLY_PROP_PRESENT, ++ POWER_SUPPLY_PROP_TEMP, ++}; ++ ++static enum power_supply_property collie_bat_bu_props[] = { ++ POWER_SUPPLY_PROP_STATUS, ++ POWER_SUPPLY_PROP_TECHNOLOGY, ++ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_NOW, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, ++ POWER_SUPPLY_PROP_VOLTAGE_MAX, ++ POWER_SUPPLY_PROP_PRESENT, ++}; ++ ++static struct collie_bat collie_bat_main = { ++ .status = POWER_SUPPLY_STATUS_DISCHARGING, ++ .full_chrg = -1, ++ .psy = { ++ .name = "main-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = collie_bat_main_props, ++ .num_properties = ARRAY_SIZE(collie_bat_main_props), ++ .get_property = collie_bat_get_property, ++ .external_power_changed = collie_bat_external_power_changed, ++ .use_for_apm = 1, ++ }, ++ ++ .gpio_full = COLLIE_GPIO_CO, ++ .gpio_charge_on = COLLIE_GPIO_CHARGE_ON, ++ ++ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, ++ ++ .gpio_bat = COLLIE_GPIO_MBAT_ON, ++ .adc_bat = UCB_ADC_INP_AD1, ++ .adc_bat_divider = 155, ++ .bat_max = 4310000, ++ .bat_min = 1551 * 1000000 / 414, ++ ++ .gpio_temp = COLLIE_GPIO_TMP_ON, ++ .adc_temp = UCB_ADC_INP_AD0, ++ .adc_temp_divider = 10000, ++}; ++ ++static struct collie_bat collie_bat_bu = { ++ .status = POWER_SUPPLY_STATUS_UNKNOWN, ++ .full_chrg = -1, ++ ++ .psy = { ++ .name = "backup-battery", ++ .type = POWER_SUPPLY_TYPE_BATTERY, ++ .properties = collie_bat_bu_props, ++ .num_properties = ARRAY_SIZE(collie_bat_bu_props), ++ .get_property = collie_bat_get_property, ++ .external_power_changed = collie_bat_external_power_changed, ++ }, ++ ++ .gpio_full = -1, ++ .gpio_charge_on = -1, ++ ++ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, ++ ++ .gpio_bat = COLLIE_GPIO_BBAT_ON, ++ .adc_bat = UCB_ADC_INP_AD1, ++ .adc_bat_divider = 155, ++ .bat_max = 3000000, ++ .bat_min = 1900000, ++ ++ .gpio_temp = -1, ++ .adc_temp = -1, ++ .adc_temp_divider = -1, ++}; ++ ++static struct { ++ int gpio; ++ char *name; ++ bool output; ++ int value; ++} gpios[] = { ++ { COLLIE_GPIO_CO, "main battery full", 0, 0 }, ++ { COLLIE_GPIO_MAIN_BAT_LOW, "main battery low", 0, 0 }, ++ { COLLIE_GPIO_CHARGE_ON, "main charge on", 1, 0 }, ++ { COLLIE_GPIO_MBAT_ON, "main battery", 1, 0 }, ++ { COLLIE_GPIO_TMP_ON, "main battery temp", 1, 0 }, ++ { COLLIE_GPIO_BBAT_ON, "backup battery", 1, 0 }, ++}; ++ ++#ifdef CONFIG_PM ++static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state) ++{ ++ /* flush all pending status updates */ ++ flush_scheduled_work(); ++ return 0; ++} ++ ++static int collie_bat_resume(struct ucb1x00_dev *dev) ++{ ++ /* things may have changed while we were away */ ++ schedule_work(&bat_work); ++ return 0; ++} ++#else ++#define collie_bat_suspend NULL ++#define collie_bat_resume NULL ++#endif ++ ++static int __devinit collie_bat_probe(struct ucb1x00_dev *dev) ++{ ++ int ret; ++ int i; ++ ++ if (!machine_is_collie()) ++ return -ENODEV; ++ ++ ucb = dev->ucb; ++ ++ for (i = 0; i < ARRAY_SIZE(gpios); i++) { ++ ret = gpio_request(gpios[i].gpio, gpios[i].name); ++ if (ret) { ++ i--; ++ goto err_gpio; ++ } ++ ++ if (gpios[i].output) ++ ret = gpio_direction_output(gpios[i].gpio, ++ gpios[i].value); ++ else ++ ret = gpio_direction_input(gpios[i].gpio); ++ ++ if (ret) ++ goto err_gpio; ++ } ++ ++ mutex_init(&collie_bat_main.work_lock); ++ ++ INIT_WORK(&bat_work, collie_bat_work); ++ ++ ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy); ++ if (ret) ++ goto err_psy_reg_main; ++ ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy); ++ if (ret) ++ goto err_psy_reg_bu; ++ ++ ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO), ++ collie_bat_gpio_isr, ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "main full", &collie_bat_main); ++ if (!ret) { ++ schedule_work(&bat_work); ++ return 0; ++ } ++ power_supply_unregister(&collie_bat_bu.psy); ++err_psy_reg_bu: ++ power_supply_unregister(&collie_bat_main.psy); ++err_psy_reg_main: ++ ++ /* see comment in collie_bat_remove */ ++ flush_scheduled_work(); ++ ++ i--; ++err_gpio: ++ for (; i >= 0; i--) ++ gpio_free(gpios[i].gpio); ++ ++ return ret; ++} ++ ++static void __devexit collie_bat_remove(struct ucb1x00_dev *dev) ++{ ++ int i; ++ ++ free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main); ++ ++ power_supply_unregister(&collie_bat_bu.psy); ++ power_supply_unregister(&collie_bat_main.psy); ++ ++ /* ++ * now flush all pending work. ++ * we won't get any more schedules, since all ++ * sources (isr and external_power_changed) ++ * are unregistered now. ++ */ ++ flush_scheduled_work(); ++ ++ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) ++ gpio_free(gpios[i].gpio); ++} ++ ++static struct ucb1x00_driver collie_bat_driver = { ++ .add = collie_bat_probe, ++ .remove = __devexit_p(collie_bat_remove), ++ .suspend = collie_bat_suspend, ++ .resume = collie_bat_resume, ++}; ++ ++static int __init collie_bat_init(void) ++{ ++ return ucb1x00_register_driver(&collie_bat_driver); ++} ++ ++static void __exit collie_bat_exit(void) ++{ ++ ucb1x00_unregister_driver(&collie_bat_driver); ++} ++ ++module_init(collie_bat_init); ++module_exit(collie_bat_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Thomas Kunze"); ++MODULE_DESCRIPTION("Collie battery driver"); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0019-collie-support-pda_power-driver.patch b/recipes/linux/linux-2.6.28/collie/0019-collie-support-pda_power-driver.patch new file mode 100644 index 0000000000..7d74cb72af --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0019-collie-support-pda_power-driver.patch @@ -0,0 +1,103 @@ +From c1a769bcd789ef7284ee4ece4324274278ee6401 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 13:48:32 +0100 +Subject: [PATCH 19/23] collie: support pda_power driver + +This add the pda-power platform device to collie. +--- + arch/arm/mach-sa1100/collie.c | 65 +++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 65 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c +index 4b52f30..7da2f28 100644 +--- a/arch/arm/mach-sa1100/collie.c ++++ b/arch/arm/mach-sa1100/collie.c +@@ -26,6 +26,7 @@ + #include <linux/mtd/partitions.h> + #include <linux/timer.h> + #include <linux/gpio.h> ++#include <linux/pda_power.h> + + #include <mach/hardware.h> + #include <asm/mach-types.h> +@@ -90,6 +91,69 @@ static struct mcp_plat_data collie_mcp_data = { + .gpio_base = COLLIE_TC35143_GPIO_BASE, + }; + ++/* ++ * Collie AC IN ++ */ ++static int collie_power_init(struct device *dev) ++{ ++ int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in"); ++ if (ret) ++ goto err_gpio_req; ++ ++ ret = gpio_direction_input(COLLIE_GPIO_AC_IN); ++ if (ret) ++ goto err_gpio_in; ++ ++ return 0; ++ ++err_gpio_in: ++ gpio_free(COLLIE_GPIO_AC_IN); ++err_gpio_req: ++ return ret; ++} ++ ++static void collie_power_exit(struct device *dev) ++{ ++ gpio_free(COLLIE_GPIO_AC_IN); ++} ++ ++static int collie_power_ac_online(void) ++{ ++ return gpio_get_value(COLLIE_GPIO_AC_IN) == 2; ++} ++ ++static char *collie_ac_supplied_to[] = { ++ "main-battery", ++ "backup-battery", ++}; ++ ++static struct pda_power_pdata collie_power_data = { ++ .init = collie_power_init, ++ .is_ac_online = collie_power_ac_online, ++ .exit = collie_power_exit, ++ .supplied_to = collie_ac_supplied_to, ++ .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to), ++}; ++ ++static struct resource collie_power_resource[] = { ++ { ++ .name = "ac", ++ .start = gpio_to_irq(COLLIE_GPIO_AC_IN), ++ .end = gpio_to_irq(COLLIE_GPIO_AC_IN), ++ .flags = IORESOURCE_IRQ | ++ IORESOURCE_IRQ_HIGHEDGE | ++ IORESOURCE_IRQ_LOWEDGE, ++ }, ++}; ++ ++static struct platform_device collie_power_device = { ++ .name = "pda-power", ++ .id = -1, ++ .dev.platform_data = &collie_power_data, ++ .resource = collie_power_resource, ++ .num_resources = ARRAY_SIZE(collie_power_resource), ++}; ++ + #ifdef CONFIG_SHARP_LOCOMO + /* + * low-level UART features. +@@ -180,6 +244,7 @@ struct platform_device collie_locomo_device = { + static struct platform_device *devices[] __initdata = { + &collie_locomo_device, + &colliescoop_device, ++ &collie_power_device, + }; + + static struct mtd_partition collie_partitions[] = { +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0020-remove-collie_pm.c.patch b/recipes/linux/linux-2.6.28/collie/0020-remove-collie_pm.c.patch new file mode 100644 index 0000000000..490e333976 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0020-remove-collie_pm.c.patch @@ -0,0 +1,323 @@ +From 702663223fdc1e3f73e9adbcb1415713b2c92652 Mon Sep 17 00:00:00 2001 +From: Thomas Kunze <thommycheck@gmx.de> +Date: Tue, 10 Feb 2009 18:16:57 +0100 +Subject: [PATCH 20/23] remove collie_pm.c + +This file was unused. The new battery driver makes it +obsolete. So remove it + +Conflicts: + + arch/arm/mach-sa1100/collie_pm.c +--- + arch/arm/mach-sa1100/collie_pm.c | 298 -------------------------------------- + 1 files changed, 0 insertions(+), 298 deletions(-) + delete mode 100644 arch/arm/mach-sa1100/collie_pm.c + +diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c +deleted file mode 100644 +index 65b8b31..0000000 +--- a/arch/arm/mach-sa1100/collie_pm.c ++++ /dev/null +@@ -1,298 +0,0 @@ +-/* +- * Based on spitz_pm.c and sharp code. +- * +- * Copyright (C) 2001 SHARP +- * Copyright 2005 Pavel Machek <pavel@suse.cz> +- * +- * Distribute under GPLv2. +- * +- * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished, +- * and sometimes charges them when it should not. If it makes angry lithium to come your way... +- * ...well, you have been warned. +- * +- * Actually, this should be quite safe, it seems sharp leaves charger enabled by default, +- * and my collie did not explode (yet). +- */ +- +-#include <linux/module.h> +-#include <linux/stat.h> +-#include <linux/init.h> +-#include <linux/kernel.h> +-#include <linux/delay.h> +-#include <linux/interrupt.h> +-#include <linux/device.h> +-#include <linux/platform_device.h> +-#include <linux/mfd/ucb1x00.h> +- +-#include <asm/irq.h> +-#include <mach/hardware.h> +-#include <asm/hardware/scoop.h> +-#include <asm/dma.h> +-#include <mach/collie.h> +-#include <asm/mach/sharpsl_param.h> +-#include <asm/hardware/sharpsl_pm.h> +- +- +-static struct ucb1x00 *ucb; +-static int ad_revise; +- +-#define ADCtoPower(x) ((330 * x * 2) / 1024) +- +-static void collie_charger_init(void) +-{ +- int err; +- +- if (sharpsl_param.adadj != -1) +- ad_revise = sharpsl_param.adadj; +- +- /* Register interrupt handler. */ +- if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED, +- "ACIN", sharpsl_ac_isr))) { +- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_AC_IN); +- return; +- } +- if ((err = request_irq(COLLIE_IRQ_GPIO_CO, sharpsl_chrg_full_isr, IRQF_DISABLED, +- "CO", sharpsl_chrg_full_isr))) { +- free_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr); +- printk("Could not get irq %d.\n", COLLIE_IRQ_GPIO_CO); +- return; +- } +- +- ucb1x00_io_set_dir(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON | COLLIE_TC35143_GPIO_TMP_ON | +- COLLIE_TC35143_GPIO_BBAT_ON); +- return; +-} +- +-static void collie_measure_temp(int on) +-{ +- if (on) +- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); +- else +- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); +-} +- +-static void collie_charge(int on) +-{ +- extern struct platform_device colliescoop_device; +- +- /* Zaurus seems to contain LTC1731; it should know when to +- * stop charging itself, so setting charge on should be +- * relatively harmless (as long as it is not done too often). +- */ +- if (on) { +- set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); +- } else { +- reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON); +- } +-} +- +-static void collie_discharge(int on) +-{ +-} +- +-static void collie_discharge1(int on) +-{ +-} +- +-static void collie_presuspend(void) +-{ +-} +- +-static void collie_postsuspend(void) +-{ +-} +- +-static int collie_should_wakeup(unsigned int resume_on_alarm) +-{ +- return 0; +-} +- +-static unsigned long collie_charger_wakeup(void) +-{ +- return 0; +-} +- +-int collie_read_backup_battery(void) +-{ +- int voltage; +- +- ucb1x00_adc_enable(ucb); +- +- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0); +- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); +- +- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); +- ucb1x00_adc_disable(ucb); +- +- printk("Backup battery = %d(%d)\n", ADCtoPower(voltage), voltage); +- +- return ADCtoPower(voltage); +-} +- +-int collie_read_main_battery(void) +-{ +- int voltage, voltage_rev, voltage_volts; +- +- ucb1x00_adc_enable(ucb); +- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON); +- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0); +- +- mdelay(1); +- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC); +- +- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON); +- ucb1x00_adc_disable(ucb); +- +- voltage_rev = voltage + ((ad_revise * voltage) / 652); +- voltage_volts = ADCtoPower(voltage_rev); +- +- printk("Main battery = %d(%d)\n", voltage_volts, voltage); +- +- if (voltage != -1) +- return voltage_volts; +- else +- return voltage; +-} +- +-int collie_read_temp(void) +-{ +- int voltage; +- +- /* According to Sharp, temp must be > 973, main battery must be < 465, +- FIXME: sharpsl_pm.c has both conditions negated? FIXME: values +- are way out of range? */ +- +- ucb1x00_adc_enable(ucb); +- ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0); +- /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */ +- voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC); +- ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON); +- ucb1x00_adc_disable(ucb); +- +- printk("Battery temp = %d\n", voltage); +- return voltage; +-} +- +-static unsigned long read_devdata(int which) +-{ +- switch (which) { +- case SHARPSL_BATT_VOLT: +- return collie_read_main_battery(); +- case SHARPSL_BATT_TEMP: +- return collie_read_temp(); +- case SHARPSL_ACIN_VOLT: +- return 500; +- case SHARPSL_STATUS_ACIN: { +- int ret = GPLR & COLLIE_GPIO_AC_IN; +- printk("AC status = %d\n", ret); +- return ret; +- } +- case SHARPSL_STATUS_FATAL: { +- int ret = GPLR & COLLIE_GPIO_MAIN_BAT_LOW; +- printk("Fatal bat = %d\n", ret); +- return ret; +- } +- default: +- return ~0; +- } +-} +- +-struct battery_thresh collie_battery_levels_acin[] = { +- { 420, 100}, +- { 417, 95}, +- { 415, 90}, +- { 413, 80}, +- { 411, 75}, +- { 408, 70}, +- { 406, 60}, +- { 403, 50}, +- { 398, 40}, +- { 391, 25}, +- { 10, 5}, +- { 0, 0}, +-}; +- +-struct battery_thresh collie_battery_levels[] = { +- { 394, 100}, +- { 390, 95}, +- { 380, 90}, +- { 370, 80}, +- { 368, 75}, /* From sharp code: battery high with frontlight */ +- { 366, 70}, /* 60..90 -- fake values invented by me for testing */ +- { 364, 60}, +- { 362, 50}, +- { 360, 40}, +- { 358, 25}, /* From sharp code: battery low with frontlight */ +- { 356, 5}, /* From sharp code: battery verylow with frontlight */ +- { 0, 0}, +-}; +- +-struct sharpsl_charger_machinfo collie_pm_machinfo = { +- .init = collie_charger_init, +- .read_devdata = read_devdata, +- .discharge = collie_discharge, +- .discharge1 = collie_discharge1, +- .charge = collie_charge, +- .measure_temp = collie_measure_temp, +- .presuspend = collie_presuspend, +- .postsuspend = collie_postsuspend, +- .charger_wakeup = collie_charger_wakeup, +- .should_wakeup = collie_should_wakeup, +- .bat_levels = 12, +- .bat_levels_noac = collie_battery_levels, +- .bat_levels_acin = collie_battery_levels_acin, +- .status_high_acin = 368, +- .status_low_acin = 358, +- .status_high_noac = 368, +- .status_low_noac = 358, +- .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */ +- .charge_on_temp = 550, +- .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */ +- .charge_acin_low = 450, /* ignored, too */ +- .fatal_acin_volt = 356, +- .fatal_noacin_volt = 356, +- +- .batfull_irq = 1, /* We do not want periodical charge restarts */ +-}; +- +-static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev) +-{ +- sharpsl_pm.machinfo = &collie_pm_machinfo; +- ucb = pdev->ucb; +- return 0; +-} +- +-static struct ucb1x00_driver collie_pm_ucb_driver = { +- .add = collie_pm_ucb_add, +-}; +- +-static struct platform_device *collie_pm_device; +- +-static int __init collie_pm_init(void) +-{ +- int ret; +- +- collie_pm_device = platform_device_alloc("sharpsl-pm", -1); +- if (!collie_pm_device) +- return -ENOMEM; +- +- collie_pm_device->dev.platform_data = &collie_pm_machinfo; +- ret = platform_device_add(collie_pm_device); +- +- if (ret) +- platform_device_put(collie_pm_device); +- +- if (!ret) +- ret = ucb1x00_register_driver(&collie_pm_ucb_driver); +- +- return ret; +-} +- +-static void __exit collie_pm_exit(void) +-{ +- ucb1x00_unregister_driver(&collie_pm_ucb_driver); +- platform_device_unregister(collie_pm_device); +-} +- +-module_init(collie_pm_init); +-module_exit(collie_pm_exit); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0021-mmc-trivial-annotation-of-blocks.patch b/recipes/linux/linux-2.6.28/collie/0021-mmc-trivial-annotation-of-blocks.patch new file mode 100644 index 0000000000..c40be53d9b --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0021-mmc-trivial-annotation-of-blocks.patch @@ -0,0 +1,40 @@ +From 0057c3469772d6cddcaa486abe46a2957bc62a2c Mon Sep 17 00:00:00 2001 +From: Harvey Harrison <harvey.harrison@gmail.com> +Date: Wed, 22 Oct 2008 17:09:00 -0700 +Subject: [PATCH 21/23] mmc: trivial annotation of 'blocks' + +sg_init_one is reading a be32, annotate as such. + +Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> +Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> +--- + drivers/mmc/card/block.c | 6 ++---- + 1 files changed, 2 insertions(+), 4 deletions(-) + +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index 3d067c3..903c8aa 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -145,7 +145,7 @@ struct mmc_blk_request { + static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) + { + int err; +- u32 blocks; ++ __be32 blocks; + + struct mmc_request mrq; + struct mmc_command cmd; +@@ -204,9 +204,7 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) + if (cmd.error || data.error) + return (u32)-1; + +- blocks = ntohl(blocks); +- +- return blocks; ++ return ntohl(blocks); + } + + static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0022-mmc_block-print-better-error-messages.patch b/recipes/linux/linux-2.6.28/collie/0022-mmc_block-print-better-error-messages.patch new file mode 100644 index 0000000000..b6cef07c19 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0022-mmc_block-print-better-error-messages.patch @@ -0,0 +1,93 @@ +From d71af40a7a15a2ee7040fa0d5c8ac1bc19873c7d Mon Sep 17 00:00:00 2001 +From: Adrian Hunter <ext-adrian.hunter@nokia.com> +Date: Thu, 16 Oct 2008 12:55:25 +0300 +Subject: [PATCH 22/23] mmc_block: print better error messages + +Add command response and card status to error +messages. + +Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> +Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> +--- + drivers/mmc/card/block.c | 44 +++++++++++++++++++++++++++++++++++++------- + 1 files changed, 37 insertions(+), 7 deletions(-) + +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index 903c8aa..cc9b3ab 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -207,6 +207,23 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) + return ntohl(blocks); + } + ++static u32 get_card_status(struct mmc_card *card, struct request *req) ++{ ++ struct mmc_command cmd; ++ int err; ++ ++ memset(&cmd, 0, sizeof(struct mmc_command)); ++ cmd.opcode = MMC_SEND_STATUS; ++ if (!mmc_host_is_spi(card->host)) ++ cmd.arg = card->rca << 16; ++ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; ++ err = mmc_wait_for_cmd(card->host, &cmd, 0); ++ if (err) ++ printk(KERN_ERR "%s: error %d sending status comand", ++ req->rq_disk->disk_name, err); ++ return cmd.resp[0]; ++} ++ + static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + { + struct mmc_blk_data *md = mq->data; +@@ -218,7 +235,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + + do { + struct mmc_command cmd; +- u32 readcmd, writecmd; ++ u32 readcmd, writecmd, status = 0; + + memset(&brq, 0, sizeof(struct mmc_blk_request)); + brq.mrq.cmd = &brq.cmd; +@@ -273,19 +290,32 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + * until later as we need to wait for the card to leave + * programming mode even when things go wrong. + */ ++ if (brq.cmd.error || brq.data.error || brq.stop.error) ++ status = get_card_status(card, req); ++ + if (brq.cmd.error) { +- printk(KERN_ERR "%s: error %d sending read/write command\n", +- req->rq_disk->disk_name, brq.cmd.error); ++ printk(KERN_ERR "%s: error %d sending read/write " ++ "command, response %#x, card status %#x\n", ++ req->rq_disk->disk_name, brq.cmd.error, ++ brq.cmd.resp[0], status); + } + + if (brq.data.error) { +- printk(KERN_ERR "%s: error %d transferring data\n", +- req->rq_disk->disk_name, brq.data.error); ++ if (brq.data.error == -ETIMEDOUT && brq.mrq.stop) ++ /* 'Stop' response contains card status */ ++ status = brq.mrq.stop->resp[0]; ++ printk(KERN_ERR "%s: error %d transferring data," ++ " sector %u, nr %u, card status %#x\n", ++ req->rq_disk->disk_name, brq.data.error, ++ (unsigned)req->sector, ++ (unsigned)req->nr_sectors, status); + } + + if (brq.stop.error) { +- printk(KERN_ERR "%s: error %d sending stop command\n", +- req->rq_disk->disk_name, brq.stop.error); ++ printk(KERN_ERR "%s: error %d sending stop command, " ++ "response %#x, card status %#x\n", ++ req->rq_disk->disk_name, brq.stop.error, ++ brq.stop.resp[0], status); + } + + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/0023-mmc_block-ensure-all-sectors-that-do-not-have-error.patch b/recipes/linux/linux-2.6.28/collie/0023-mmc_block-ensure-all-sectors-that-do-not-have-error.patch new file mode 100644 index 0000000000..3ff32b0a94 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/0023-mmc_block-ensure-all-sectors-that-do-not-have-error.patch @@ -0,0 +1,148 @@ +From fba35a4bb8f9cabcd374e19a2a34ee5496d971d2 Mon Sep 17 00:00:00 2001 +From: Adrian Hunter <ext-adrian.hunter@nokia.com> +Date: Wed, 31 Dec 2008 18:21:17 +0100 +Subject: [PATCH 23/23] mmc_block: ensure all sectors that do not have errors are read + +If a card encounters an ECC error while reading a sector it will +timeout. Instead of reporting the entire I/O request as having +an error, redo the I/O one sector at a time so that all readable +sectors are provided to the upper layers. + +Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> +Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> +--- + drivers/mmc/card/block.c | 76 +++++++++++++++++++++++++++++++++++---------- + 1 files changed, 59 insertions(+), 17 deletions(-) + +diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c +index cc9b3ab..45b1f43 100644 +--- a/drivers/mmc/card/block.c ++++ b/drivers/mmc/card/block.c +@@ -229,7 +229,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + struct mmc_blk_data *md = mq->data; + struct mmc_card *card = md->queue.card; + struct mmc_blk_request brq; +- int ret = 1; ++ int ret = 1, disable_multi = 0; + + mmc_claim_host(card->host); + +@@ -251,6 +251,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + brq.data.blocks = req->nr_sectors; + ++ /* ++ * After a read error, we redo the request one sector at a time ++ * in order to accurately determine which sectors can be read ++ * successfully. ++ */ ++ if (disable_multi && brq.data.blocks > 1) ++ brq.data.blocks = 1; ++ + if (brq.data.blocks > 1) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. +@@ -279,6 +287,25 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + brq.data.sg = mq->sg; + brq.data.sg_len = mmc_queue_map_sg(mq); + ++ /* ++ * Adjust the sg list so it is the same size as the ++ * request. ++ */ ++ if (brq.data.blocks != req->nr_sectors) { ++ int i, data_size = brq.data.blocks << 9; ++ struct scatterlist *sg; ++ ++ for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { ++ data_size -= sg->length; ++ if (data_size <= 0) { ++ sg->length += data_size; ++ i++; ++ break; ++ } ++ } ++ brq.data.sg_len = i; ++ } ++ + mmc_queue_bounce_pre(mq); + + mmc_wait_for_req(card->host, &brq.mrq); +@@ -290,8 +317,16 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + * until later as we need to wait for the card to leave + * programming mode even when things go wrong. + */ +- if (brq.cmd.error || brq.data.error || brq.stop.error) ++ if (brq.cmd.error || brq.data.error || brq.stop.error) { ++ if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { ++ /* Redo read one sector at a time */ ++ printk(KERN_WARNING "%s: retrying using single " ++ "block read\n", req->rq_disk->disk_name); ++ disable_multi = 1; ++ continue; ++ } + status = get_card_status(card, req); ++ } + + if (brq.cmd.error) { + printk(KERN_ERR "%s: error %d sending read/write " +@@ -348,8 +383,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + #endif + } + +- if (brq.cmd.error || brq.data.error || brq.stop.error) ++ if (brq.cmd.error || brq.stop.error || brq.data.error) { ++ if (rq_data_dir(req) == READ) { ++ /* ++ * After an error, we redo I/O one sector at a ++ * time, so we only reach here after trying to ++ * read a single sector. ++ */ ++ spin_lock_irq(&md->lock); ++ ret = __blk_end_request(req, -EIO, brq.data.blksz); ++ spin_unlock_irq(&md->lock); ++ continue; ++ } + goto cmd_err; ++ } + + /* + * A block was successfully transferred. +@@ -371,25 +418,20 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) + * If the card is not SD, we can still ok written sectors + * as reported by the controller (which might be less than + * the real number of written sectors, but never more). +- * +- * For reads we just fail the entire chunk as that should +- * be safe in all cases. + */ +- if (rq_data_dir(req) != READ) { +- if (mmc_card_sd(card)) { +- u32 blocks; ++ if (mmc_card_sd(card)) { ++ u32 blocks; + +- blocks = mmc_sd_num_wr_blocks(card); +- if (blocks != (u32)-1) { +- spin_lock_irq(&md->lock); +- ret = __blk_end_request(req, 0, blocks << 9); +- spin_unlock_irq(&md->lock); +- } +- } else { ++ blocks = mmc_sd_num_wr_blocks(card); ++ if (blocks != (u32)-1) { + spin_lock_irq(&md->lock); +- ret = __blk_end_request(req, 0, brq.data.bytes_xfered); ++ ret = __blk_end_request(req, 0, blocks << 9); + spin_unlock_irq(&md->lock); + } ++ } else { ++ spin_lock_irq(&md->lock); ++ ret = __blk_end_request(req, 0, brq.data.bytes_xfered); ++ spin_unlock_irq(&md->lock); + } + + mmc_release_host(card->host); +-- +1.5.6.5 + diff --git a/recipes/linux/linux-2.6.28/collie/defconfig b/recipes/linux/linux-2.6.28/collie/defconfig new file mode 100644 index 0000000000..e815c97e42 --- /dev/null +++ b/recipes/linux/linux-2.6.28/collie/defconfig @@ -0,0 +1,1677 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28 +# Fri Feb 13 10:42:04 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=m +CONFIG_IOSCHED_CFQ=m +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +CONFIG_SA1100_COLLIE=y +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_SA1100=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=3 mem=64M fbcon=rotate:1 debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_ASK_IP_FIB_HASH is not set +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +# CONFIG_DEFAULT_BIC is not set +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SCTP_HMAC_MD5 is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# FIR device drivers +# +# CONFIG_SA1100_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_SHARP=y + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SA1100=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=m +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_PCMCIA_RAYCS=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM=m +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_ATMEL=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_WL3501=m +CONFIG_MAC80211_HWSIM=m +CONFIG_P54_COMMON=m +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +CONFIG_B43=m +# CONFIG_B43_PCMCIA is not set +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +# CONFIG_B43LEGACY_DEBUG is not set +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_RT2X00=m +CONFIG_NET_PCMCIA=y +CONFIG_PCMCIA_3C589=m +CONFIG_PCMCIA_3C574=m +CONFIG_PCMCIA_FMVJ18X=m +CONFIG_PCMCIA_PCNET=m +CONFIG_PCMCIA_NMCLAN=m +CONFIG_PCMCIA_SMC91C92=m +CONFIG_PCMCIA_XIRC2PS=m +CONFIG_PCMCIA_AXNET=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +CONFIG_INPUT_APMPOWER=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_HTCPEN is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1200_TS is not set +CONFIG_TOUCHSCREEN_COLLIE_TS=y +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_LOCOMO=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PDA_POWER=y +CONFIG_APM_POWER=y +# CONFIG_BATTERY_DS2760 is not set +CONFIG_BATTERY_COLLIE=y +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_SA1100_WATCHDOG=m + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia Capabilities Port drivers +# +CONFIG_MCP=y +CONFIG_MCP_SA11X0=y +CONFIG_MCP_UCB1200=y + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LOCOMO=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_HID=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_SA1100=y +CONFIG_USB_SA1100=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_SDIO_UART=m +CONFIG_MMC_TEST=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_LOCOMO=y +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_SMX=m +CONFIG_UIO_SERCOS3=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_UBIFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-2.6.28/linux-2.6.28-at91.patch.bz2 b/recipes/linux/linux-2.6.28/linux-2.6.28-at91.patch.bz2 Binary files differnew file mode 100644 index 0000000000..7069c54dd4 --- /dev/null +++ b/recipes/linux/linux-2.6.28/linux-2.6.28-at91.patch.bz2 diff --git a/recipes/linux/linux-2.6.28/linux-2.6.28-exp.patch.bz2 b/recipes/linux/linux-2.6.28/linux-2.6.28-exp.patch.bz2 Binary files differnew file mode 100644 index 0000000000..9417b3aab6 --- /dev/null +++ b/recipes/linux/linux-2.6.28/linux-2.6.28-exp.patch.bz2 diff --git a/recipes/linux/linux-2.6.28/ronetix-pm9263/defconfig b/recipes/linux/linux-2.6.28/ronetix-pm9263/defconfig new file mode 100644 index 0000000000..ec5bf7a39a --- /dev/null +++ b/recipes/linux/linux-2.6.28/ronetix-pm9263/defconfig @@ -0,0 +1,1438 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28 +# Tue Dec 30 15:28:55 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-pm9263" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +CONFIG_ARCH_AT91SAM9263=y +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9263 Board Type +# +# CONFIG_MACH_AT91SAM9263EK is not set +# CONFIG_MACH_USB_A9263 is not set +# CONFIG_MACH_CSB737 is not set +# CONFIG_MACH_TOTEMNOVA is not set +# CONFIG_MACH_NEOCORE926 is not set +CONFIG_MACH_PM9263=y + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_AT91_CF=y + +# +# Kernel Features +# +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=y +CONFIG_MTD_ABSENT=y + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x10000000 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +# CONFIG_ATMEL_TCLIB is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=y + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +CONFIG_W1_SLAVE_SMEM=y +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_ARM=y +CONFIG_SND_AT91_AC97=y +CONFIG_SND_SPI=y +# CONFIG_SND_AT73C213 is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_PCMCIA=y +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-2.6.28/ronetix-pm9263/linux-2.6.28-at91-ronetix-12012009.patch b/recipes/linux/linux-2.6.28/ronetix-pm9263/linux-2.6.28-at91-ronetix-12012009.patch new file mode 100644 index 0000000000..fbd0c90a23 --- /dev/null +++ b/recipes/linux/linux-2.6.28/ronetix-pm9263/linux-2.6.28-at91-ronetix-12012009.patch @@ -0,0 +1,1751 @@ +diff -urNp linux-2.6.28-at91/arch/arm/mach-at91/at91sam9263_devices.c.rej linux-2.6.28-at91-ronetix/arch/arm/mach-at91/at91sam9263_devices.c.rej +--- linux-2.6.28-at91/arch/arm/mach-at91/at91sam9263_devices.c.rej 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/arch/arm/mach-at91/at91sam9263_devices.c.rej 2009-01-12 16:00:42.000000000 +0100 +@@ -0,0 +1,17 @@ ++*************** ++*** 645,651 **** ++ if (data->reset_pin) ++ at91_set_gpio_output(data->reset_pin, 0); ++ ++- ac97_data = *ek_data; ++ platform_device_register(&at91sam9263_ac97_device); ++ } ++ #else ++--- 645,651 ---- ++ if (data->reset_pin) ++ at91_set_gpio_output(data->reset_pin, 0); ++ +++ ac97_data = *data; ++ platform_device_register(&at91sam9263_ac97_device); ++ } ++ #else +diff -urNp linux-2.6.28-at91/arch/arm/mach-at91/board-pm9263.c linux-2.6.28-at91-ronetix/arch/arm/mach-at91/board-pm9263.c +--- linux-2.6.28-at91/arch/arm/mach-at91/board-pm9263.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/arch/arm/mach-at91/board-pm9263.c 2009-01-12 16:00:42.000000000 +0100 +@@ -0,0 +1,528 @@ ++/* ++ * linux/arch/arm/mach-at91/board-pm9263.c ++ * ++ * Copyright (C) 2008 Ronetix ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++#include <linux/init.h> ++#include <linux/mm.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/ads7846.h> ++#include <linux/i2c/at24.h> ++#include <linux/fb.h> ++#include <linux/gpio_keys.h> ++#include <linux/input.h> ++#include <linux/leds.h> ++#include <linux/w1-gpio.h> ++ ++#include <video/atmel_lcdc.h> ++ ++#include <asm/setup.h> ++#include <asm/mach-types.h> ++#include <asm/irq.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <mach/hardware.h> ++#include <mach/board.h> ++#include <mach/gpio.h> ++#include <mach/at91sam9_smc.h> ++#include <mach/at91_shdwc.h> ++#include <mach/at91sam9263_matrix.h> ++ ++#include "sam9_smc.h" ++#include "generic.h" ++ ++ ++static void __init pm9263_map_io(void) ++{ ++ /* Initialize processor: 18.432 MHz crystal */ ++ at91sam9263_initialize(18432000); ++ ++ /* DGBU on ttyS0. (Rx & Tx only) */ ++ at91_register_uart(0, 0, 0); ++ ++ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */ ++ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); ++ ++ /* set serial console to ttyS0 (ie, DBGU) */ ++ at91_set_serial_console(0); ++} ++ ++static void __init pm9263_init_irq(void) ++{ ++ at91sam9263_init_interrupts(NULL); ++} ++ ++ ++/* ++ * USB Host port ++ */ ++static struct at91_usbh_data __initdata pm9263_usbh_data = { ++ .ports = 2, ++ .vbus_pin = { 0, 0 }, ++}; ++ ++/* ++ * USB Device port ++ */ ++static struct at91_udc_data __initdata pm9263_udc_data = { ++ .vbus_pin = AT91_PIN_PA25, ++ .pullup_pin = 0, /* pull-up driven by UDC */ ++}; ++ ++ ++/* ++ * ADS7846 Touchscreen ++ */ ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++static int ads7843_pendown_state(void) ++{ ++ return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */ ++} ++ ++static struct ads7846_platform_data ads_info = { ++ .model = 7843, ++ .x_min = 150, ++ .x_max = 3830, ++ .y_min = 190, ++ .y_max = 3830, ++ .vref_delay_usecs = 100, ++ .x_plate_ohms = 450, ++ .y_plate_ohms = 250, ++ .pressure_max = 15000, ++ .debounce_max = 1, ++ .debounce_rep = 0, ++ .debounce_tol = (~0), ++ .get_pendown_state = ads7843_pendown_state, ++}; ++ ++static void __init pm9263_add_device_ts(void) ++{ ++ at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */ ++ at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */ ++} ++#else ++static void __init pm9263_add_device_ts(void) {} ++#endif ++ ++/* ++ * SPI devices. ++ */ ++static struct spi_board_info pm9263_spi_devices[] = { ++#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) ++ { /* DataFlash card */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 15 * 1000 * 1000, ++ .bus_num = 0, ++ }, ++#endif ++#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) ++ { ++ .modalias = "ads7846", ++ .chip_select = 0, ++ .max_speed_hz = 125000 * 16, /* max sample rate * clocks per sample */ ++ .bus_num = 1, ++ .platform_data = &ads_info, ++ .irq = AT91SAM9263_ID_IRQ1, ++ }, ++#endif ++}; ++ ++ ++/* ++ * MCI (SD/MMC) ++ */ ++static struct at91_mmc_data __initdata pm9263_mmc_data = { ++ .wire4 = 1, ++ .det_pin = AT91_PIN_PA21, ++ .wp_pin = AT91_PIN_PA16, ++// .vcc_pin = ... not connected ++}; ++ ++ ++/* ++ * MACB Ethernet device ++ */ ++static struct at91_eth_data __initdata pm9263_macb_data = { ++ .phy_irq_pin = AT91_PIN_PE31, ++ .is_rmii = 1, ++}; ++ ++ ++/* ++ * NAND flash ++ */ ++static struct mtd_partition __initdata pm9263_nand_partition[] = { ++ { ++ .name = "Partition 1", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) ++{ ++ *num_partitions = ARRAY_SIZE(pm9263_nand_partition); ++ return pm9263_nand_partition; ++} ++ ++static struct atmel_nand_data __initdata pm9263_nand_data = { ++ .ale = 21, ++ .cle = 22, ++// .det_pin = ... not connected ++ .rdy_pin = AT91_PIN_PB30, ++ .enable_pin = AT91_PIN_PD15, ++ .partition_info = nand_partitions, ++#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) ++ .bus_width_16 = 1, ++#else ++ .bus_width_16 = 0, ++#endif ++}; ++ ++static struct sam9_smc_config __initdata pm9263_nand_smc_config = { ++ .ncs_read_setup = 0, ++ .nrd_setup = 1, ++ .ncs_write_setup = 0, ++ .nwe_setup = 1, ++ ++ .ncs_read_pulse = 3, ++ .nrd_pulse = 3, ++ .ncs_write_pulse = 3, ++ .nwe_pulse = 3, ++ ++ .read_cycle = 5, ++ .write_cycle = 5, ++ ++ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, ++ .tdf_cycles = 2, ++}; ++ ++static void __init pm9263_add_device_nand(void) ++{ ++ /* setup bus-width (8 or 16) */ ++ if (pm9263_nand_data.bus_width_16) ++ pm9263_nand_smc_config.mode |= AT91_SMC_DBW_16; ++ else ++ pm9263_nand_smc_config.mode |= AT91_SMC_DBW_8; ++ ++ /* configure chip-select 3 (NAND) */ ++ sam9_smc_configure(3, &pm9263_nand_smc_config); ++ ++ at91_add_device_nand(&pm9263_nand_data); ++} ++ ++ ++/* ++ * LCD Controller ++ */ ++#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) ++static struct fb_videomode at91_tft_vga_modes[] = { ++ { ++ .name = "TX09D50VM1CCA @ 60", ++ .refresh = 60, ++ .xres = 240, .yres = 320, ++ .pixclock = KHZ2PICOS(4965), ++ ++ .left_margin = 1, .right_margin = 33, ++ .upper_margin = 1, .lower_margin = 0, ++ .hsync_len = 5, .vsync_len = 1, ++ ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ }, ++}; ++ ++static struct fb_monspecs at91fb_default_monspecs = { ++ .manufacturer = "HIT", ++ .monitor = "TX09D70VM1CCA", ++ ++ .modedb = at91_tft_vga_modes, ++ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes), ++ .hfmin = 15000, ++ .hfmax = 64000, ++ .vfmin = 50, ++ .vfmax = 150, ++}; ++ ++#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ ++ | ATMEL_LCDC_DISTYPE_TFT \ ++ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) ++ ++static void at91_lcdc_power_control(int on) ++{ ++ at91_set_gpio_value(AT91_PIN_PA22, on); ++} ++ ++/* Driver datas */ ++static struct atmel_lcdfb_info __initdata pm9263_lcdc_data = { ++ .lcdcon_is_backlight = true, ++ .default_bpp = 16, ++ .default_dmacon = ATMEL_LCDC_DMAEN, ++ .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2, ++ .default_monspecs = &at91fb_default_monspecs, ++ .atmel_lcdfb_power_control = at91_lcdc_power_control, ++ .guard_time = 1, ++}; ++ ++#else ++static struct atmel_lcdfb_info __initdata pm9263_lcdc_data; ++#endif ++ ++ ++/* ++ * GPIO Buttons ++ */ ++#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) ++static struct gpio_keys_button pm9263_buttons[] = { ++ { /* SW3 */ ++ .code = BTN_LEFT, ++ .gpio = AT91_PIN_PC5, ++ .active_low = 1, ++ .desc = "SW3", ++ .wakeup = 1, ++ }, ++ { /* SW4 */ ++ .code = BTN_RIGHT, ++ .gpio = AT91_PIN_PC4, ++ .active_low = 1, ++ .desc = "SW4", ++ .wakeup = 1, ++ } ++}; ++ ++static struct gpio_keys_platform_data pm9263_button_data = { ++ .buttons = pm9263_buttons, ++ .nbuttons = ARRAY_SIZE(pm9263_buttons), ++}; ++ ++static struct platform_device pm9263_button_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .num_resources = 0, ++ .dev = { ++ .platform_data = &pm9263_button_data, ++ } ++}; ++ ++static void __init pm9263_add_device_buttons(void) ++{ ++ int i; ++ ++ for (i = 0; i < pm9263_button_data.nbuttons; i ++) { ++ at91_set_gpio_input(pm9263_buttons[i].gpio, 1); ++ at91_set_deglitch(pm9263_buttons[i].gpio, 1); ++ } ++ ++// platform_device_register(&pm9263_button_device); ++} ++#else ++static void __init pm9263_add_device_buttons(void) {} ++#endif ++ ++ ++/* ++ * AC97 ++ */ ++static struct atmel_ac97_data pm9263_ac97_data = { ++ .reset_pin = 0, ++}; ++ ++ ++/* ++ * LEDs ... these could all be PWM-driven, for variable brightness ++ */ ++static struct gpio_led pm9263_leds[] = { ++ { /* "right" led, green, userled2 (could be driven by pwm2) */ ++ .name = "led0", ++ .gpio = AT91_PIN_PB7, ++ .active_low = 1, ++ .default_trigger = "nand-disk", ++ }, ++ { /* "power" led, yellow (could be driven by pwm0) */ ++ .name = "led1", ++ .gpio = AT91_PIN_PB8, ++ .active_low = 1, ++ .default_trigger = "heartbeat", ++ } ++}; ++ ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++struct w1_gpio_platform_data pm926x_w1_platdata = { ++ .pin = AT91_PIN_PB31, ++ .is_open_drain = 0, ++}; ++ ++static struct platform_device pm926x_w1_device = { ++ .name = "w1-gpio", ++ .id = 0, ++ .dev = { ++ .platform_data = &pm926x_w1_platdata, ++ }, ++}; ++#endif ++ ++#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) ++static struct at91_cf_data pm9263_cf_data = { ++ .det_pin = AT91_PIN_PA30, ++ .rst_pin = AT91_PIN_PA23, ++ .irq_pin = AT91_PIN_PA24, ++ // .vcc_pin = ... always powered ++ .chipselect = 4, ++}; ++ ++static struct resource pm9263_cf_resources[] = { ++ [0] = { ++ .start = AT91_CHIPSELECT_4, ++ .end = AT91_CHIPSELECT_4 + (0x10000000 - 1), ++ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, ++ }, ++}; ++ ++static struct platform_device pm9263_cf_device = { ++ .name = "at91_cf", ++ .id = -1, ++ .dev = { ++ .platform_data = &pm9263_cf_data, ++ }, ++ .resource = pm9263_cf_resources, ++ .num_resources = ARRAY_SIZE(pm9263_cf_resources), ++}; ++ ++#define CF_NWE_SETUP (9 << 0) ++#define CF_NCS_WR_SETUP (2 << 8) ++#define CF_NRD_SETUP (9 << 16) ++#define CF_NCS_RD_SETUP (2 << 24) ++ ++#define CF_NWE_PULSE (17 << 0) ++#define CF_NCS_WR_PULSE (27 << 8) ++#define CF_NRD_PULSE (17 << 16) ++#define CF_NCS_RD_PULSE (27 << 24) ++ ++#define CF_NWE_CYCLE (40 << 0) ++#define CF_NRD_CYCLE (40 << 16) ++ ++#define CF_TDF (1 << 16) ++ ++static void __init pm9263_add_device_cf(void) { ++struct at91_cf_data *data = & pm9263_cf_data; ++unsigned int csa; ++ ++ // Setup Compact flash, first enable the address range of ++ // CS4 in HMATRIX user interface ++ csa = at91_sys_read(AT91_MATRIX_EBI0CSA); ++ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS4A_SMC_CF1); ++ ++ /* Configure SMC CS4 */ ++ at91_sys_write(AT91_SMC_SETUP(4), ++ (CF_NWE_SETUP | ++ CF_NCS_WR_SETUP | ++ CF_NRD_SETUP | ++ CF_NCS_RD_SETUP)); ++ ++ at91_sys_write(AT91_SMC_PULSE(4), (CF_NWE_PULSE | ++ CF_NCS_WR_PULSE | ++ CF_NRD_PULSE | ++ CF_NCS_RD_PULSE)); ++ at91_sys_write(AT91_SMC_CYCLE(4), (CF_NWE_CYCLE | CF_NRD_CYCLE)); ++ // 16 bit ++ at91_sys_write (AT91_SMC_MODE(4), (AT91_SMC_READMODE | ++ AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++ AT91_SMC_DBW_16 | ++ CF_TDF)); ++ ++ /* input/irq */ ++ if (data->irq_pin) { ++ at91_set_gpio_input(data->irq_pin, 0); ++ at91_set_deglitch(data->irq_pin, 1); ++ } ++ at91_set_gpio_input(data->det_pin, 0); ++ at91_set_deglitch(data->det_pin, 1); ++ ++ /* outputs, initially off */ ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ if (data->rst_pin) ++ at91_set_gpio_output(data->rst_pin, 0); ++ ++ /* force poweron defaults for these pins ... */ ++ at91_set_A_periph(AT91_PIN_PD5, 0); /* PD5/CF_NWAIT */ ++ at91_set_A_periph(AT91_PIN_PD14, 0); /* A25/CFRNW */ ++ at91_set_A_periph(AT91_PIN_PD6, 0); /* NCS4/CFCS0 */ ++ at91_set_A_periph(AT91_PIN_PD8, 0); /* PD8/CFCE1 */ ++ at91_set_A_periph(AT91_PIN_PD9, 0); /* PD9/CFCE2 */ ++ ++ platform_device_register(&pm9263_cf_device); ++} ++#else ++void __init pm9263_add_device_cf(void) {} ++#endif ++ ++static void __init pm9263_board_init(void) ++{ ++ /* Serial */ ++ at91_add_device_serial(); ++ /* USB Host */ ++ at91_add_device_usbh(&pm9263_usbh_data); ++ /* USB Device */ ++ at91_add_device_udc(&pm9263_udc_data); ++ /* SPI */ ++ at91_add_device_spi(pm9263_spi_devices, ARRAY_SIZE(pm9263_spi_devices)); ++ /* Touchscreen */ ++ pm9263_add_device_ts(); ++ /* MMC */ ++ at91_add_device_mmc(1, &pm9263_mmc_data); ++ /* Ethernet */ ++ at91_add_device_eth(&pm9263_macb_data); ++ /* NAND */ ++ pm9263_add_device_nand(); ++ /* LCD Controller */ ++ at91_add_device_lcdc(&pm9263_lcdc_data); ++ /* Push Buttons */ ++ pm9263_add_device_buttons(); ++ /* AC97 */ ++ at91_add_device_ac97(&pm9263_ac97_data); ++#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE) ++ platform_device_register(&pm926x_w1_device); ++#endif ++ /* Compact flash */ ++ pm9263_add_device_cf(); ++ /* LEDs */ ++ at91_gpio_leds(pm9263_leds, ARRAY_SIZE(pm9263_leds)); ++ /* shutdown controller, wakeup button (5 msec low) */ ++ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW ++ | AT91_SHDW_RTTWKEN); ++} ++ ++MACHINE_START(PM9263, "Ronetix PM9263/BB9263") ++ /* Maintainer: Atmel */ ++ .phys_io = AT91_BASE_SYS, ++ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, ++ .boot_params = AT91_SDRAM_BASE + 0x100, ++ .timer = &at91sam926x_timer, ++ .map_io = pm9263_map_io, ++ .init_irq = pm9263_init_irq, ++ .init_machine = pm9263_board_init, ++MACHINE_END +diff -urNp linux-2.6.28-at91/arch/arm/mach-at91/include/mach/at91_ac97c.h linux-2.6.28-at91-ronetix/arch/arm/mach-at91/include/mach/at91_ac97c.h +--- linux-2.6.28-at91/arch/arm/mach-at91/include/mach/at91_ac97c.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/arch/arm/mach-at91/include/mach/at91_ac97c.h 2009-01-12 16:00:42.000000000 +0100 +@@ -0,0 +1,282 @@ ++/* linux/include/asm-arm/arch-at91rm9200/ac97c.h ++ * ++ * Hardware definition for the ac97c peripheral in the ATMEL at91sam926x processor ++ * ++ * Generated 12/09/2005 (11:54:20) AT91 SW Application Group from AC97C_XXXX V1.3 ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE ++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT ++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, ++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, ++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++ ++#ifndef __AC97C_H ++#define __AC97C_H ++ ++/* -------------------------------------------------------- */ ++/* AC97C ID definitions for AT91SAM926x */ ++/* -------------------------------------------------------- */ ++#ifndef AT91C_ID_AC97C ++#define AT91C_ID_AC97C 18 /**< AC97 Controller id */ ++#endif /* AT91C_ID_AC97C */ ++ ++/* -------------------------------------------------------- */ ++/* AC97C Base Address definitions for AT91SAM926x */ ++/* -------------------------------------------------------- */ ++#define AT91C_BASE_AC97C 0xFFFA0000 /**< AC97C base address */ ++ ++/* -------------------------------------------------------- */ ++/* PIO definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++#define AT91C_PB1_AC97CK (1 << 1) /**< */ ++#define AT91C_PB0_AC97FS (1 << 0) /**< */ ++#define AT91C_PB3_AC97RX (1 << 3) /**< */ ++#define AT91C_PB2_AC97TX (1 << 2) /**< */ ++ ++ ++/* -------------------------------------------------------- */ ++/* Register offset definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++#define AC97C_MR (0x0008) /**< Mode Register */ ++#define AC97C_ICA (0x0010) /**< Input Channel AssignementRegister */ ++#define AC97C_OCA (0x0014) /**< Output Channel Assignement Register */ ++#define AC97C_CARHR (0x0020) /**< Channel A Receive Holding Register */ ++#define AC97C_CATHR (0x0024) /**< Channel A Transmit Holding Register */ ++#define AC97C_CASR (0x0028) /**< Channel A Status Register */ ++#define AC97C_CAMR (0x002C) /**< Channel A Mode Register */ ++#define AC97C_CBRHR (0x0030) /**< Channel B Receive Holding Register (optional) */ ++#define AC97C_CBTHR (0x0034) /**< Channel B Transmit Holding Register (optional) */ ++#define AC97C_CBSR (0x0038) /**< Channel B Status Register */ ++#define AC97C_CBMR (0x003C) /**< Channel B Mode Register */ ++#define AC97C_CORHR (0x0040) /**< COdec Transmit Holding Register */ ++#define AC97C_COTHR (0x0044) /**< COdec Transmit Holding Register */ ++#define AC97C_COSR (0x0048) /**< CODEC Status Register */ ++#define AC97C_COMR (0x004C) /**< CODEC Mask Status Register */ ++#define AC97C_SR (0x0050) /**< Status Register */ ++#define AC97C_IER (0x0054) /**< Interrupt Enable Register */ ++#define AC97C_IDR (0x0058) /**< Interrupt Disable Register */ ++#define AC97C_IMR (0x005C) /**< Interrupt Mask Register */ ++#define AC97C_VERSION (0x00FC) /**< Version Register */ ++ ++/* -------------------------------------------------------- */ ++/* Bitfields definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++/* --- Register AC97C_MR */ ++#define AT91C_AC97C_ENA (0x1 << 0 ) /**< (AC97C) AC97 Controller Global Enable */ ++#define AT91C_AC97C_WRST (0x1 << 1 ) /**< (AC97C) Warm Reset */ ++#define AT91C_AC97C_VRA (0x1 << 2 ) /**< (AC97C) Variable RAte (for Data Slots) */ ++/* --- Register AC97C_ICA */ ++#define AT91C_AC97C_CHID3 (0x7 << 0 ) /**< (AC97C) Channel Id for the input slot 3 */ ++#define AT91C_AC97C_CHID3_NONE 0x0 /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CA 0x1 /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CB 0x2 /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CC 0x3 /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4 (0x7 << 3 ) /**< (AC97C) Channel Id for the input slot 4 */ ++#define AT91C_AC97C_CHID4_NONE (0x0 << 3) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CA (0x1 << 3) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CB (0x2 << 3) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CC (0x3 << 3) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5 (0x7 << 6 ) /**< (AC97C) Channel Id for the input slot 5 */ ++#define AT91C_AC97C_CHID5_NONE (0x0 << 6) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CA (0x1 << 6) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CB (0x2 << 6) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CC (0x3 << 6) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6 (0x7 << 9 ) /**< (AC97C) Channel Id for the input slot 6 */ ++#define AT91C_AC97C_CHID6_NONE (0x0 << 9) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CA (0x1 << 9) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CB (0x2 << 9) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CC (0x3 << 9) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7 (0x7 << 12) /**< (AC97C) Channel Id for the input slot 7 */ ++#define AT91C_AC97C_CHID7_NONE (0x0 << 12) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CA (0x1 << 12) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CB (0x2 << 12) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CC (0x3 << 12) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8 (0x7 << 15) /**< (AC97C) Channel Id for the input slot 8 */ ++#define AT91C_AC97C_CHID8_NONE (0x0 << 15) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CA (0x1 << 15) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CB (0x2 << 15) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CC (0x3 << 15) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9 (0x7 << 18) /**< (AC97C) Channel Id for the input slot 9 */ ++#define AT91C_AC97C_CHID9_NONE (0x0 << 18) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CA (0x1 << 18) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CB (0x2 << 18) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CC (0x3 << 18) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10 (0x7 << 21) /**< (AC97C) Channel Id for the input slot 10 */ ++#define AT91C_AC97C_CHID10_NONE (0x0 << 21) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CA (0x1 << 21) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CB (0x2 << 21) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CC (0x3 << 21) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11 (0x7 << 24) /**< (AC97C) Channel Id for the input slot 11 */ ++#define AT91C_AC97C_CHID11_NONE (0x0 << 24) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CA (0x1 << 24) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CB (0x2 << 24) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CC (0x3 << 24) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12 (0x7 << 27) /**< (AC97C) Channel Id for the input slot 12 */ ++#define AT91C_AC97C_CHID12_NONE (0x0 << 27) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CA (0x1 << 27) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CB (0x2 << 27) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CC (0x3 << 27) /**< (AC97C) Channel C data will be transmitted during this slot */ ++/* --- Register AC97C_OCA */ ++#define AT91C_AC97C_CHID3 (0x7 << 0 ) /**< (AC97C) Channel Id for the input slot 3 */ ++#define AT91C_AC97C_CHID3_NONE 0x0 /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CA 0x1 /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CB 0x2 /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CC 0x3 /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4 (0x7 << 3 ) /**< (AC97C) Channel Id for the input slot 4 */ ++#define AT91C_AC97C_CHID4_NONE (0x0 << 3) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CA (0x1 << 3) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CB (0x2 << 3) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CC (0x3 << 3) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5 (0x7 << 6 ) /**< (AC97C) Channel Id for the input slot 5 */ ++#define AT91C_AC97C_CHID5_NONE (0x0 << 6) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CA (0x1 << 6) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CB (0x2 << 6) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CC (0x3 << 6) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6 (0x7 << 9 ) /**< (AC97C) Channel Id for the input slot 6 */ ++#define AT91C_AC97C_CHID6_NONE (0x0 << 9) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CA (0x1 << 9) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CB (0x2 << 9) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CC (0x3 << 9) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7 (0x7 << 12) /**< (AC97C) Channel Id for the input slot 7 */ ++#define AT91C_AC97C_CHID7_NONE (0x0 << 12) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CA (0x1 << 12) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CB (0x2 << 12) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CC (0x3 << 12) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8 (0x7 << 15) /**< (AC97C) Channel Id for the input slot 8 */ ++#define AT91C_AC97C_CHID8_NONE (0x0 << 15) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CA (0x1 << 15) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CB (0x2 << 15) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CC (0x3 << 15) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9 (0x7 << 18) /**< (AC97C) Channel Id for the input slot 9 */ ++#define AT91C_AC97C_CHID9_NONE (0x0 << 18) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CA (0x1 << 18) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CB (0x2 << 18) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CC (0x3 << 18) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10 (0x7 << 21) /**< (AC97C) Channel Id for the input slot 10 */ ++#define AT91C_AC97C_CHID10_NONE (0x0 << 21) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CA (0x1 << 21) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CB (0x2 << 21) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CC (0x3 << 21) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11 (0x7 << 24) /**< (AC97C) Channel Id for the input slot 11 */ ++#define AT91C_AC97C_CHID11_NONE (0x0 << 24) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CA (0x1 << 24) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CB (0x2 << 24) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CC (0x3 << 24) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12 (0x7 << 27) /**< (AC97C) Channel Id for the input slot 12 */ ++#define AT91C_AC97C_CHID12_NONE (0x0 << 27) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CA (0x1 << 27) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CB (0x2 << 27) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CC (0x3 << 27) /**< (AC97C) Channel C data will be transmitted during this slot */ ++/* --- Register AC97C_CARHR */ ++#define AT91C_AC97C_RDATA (0xFFFFF << 0 ) /**< (AC97C) Receive data */ ++/* --- Register AC97C_CATHR */ ++#define AT91C_AC97C_TDATA (0xFFFFF << 0 ) /**< (AC97C) Transmit data */ ++/* --- Register AC97C_CASR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5 ) /**< (AC97C) */ ++#define AT91C_AC97C_ENDTX (0x1 << 10) /**< (AC97C) */ ++#define AT91C_AC97C_TXBUFE (0x1 << 11) /**< (AC97C) */ ++#define AT91C_AC97C_ENDRX (0x1 << 14) /**< (AC97C) */ ++#define AT91C_AC97C_RXBUFF (0x1 << 15) /**< (AC97C) */ ++/* --- Register AC97C_CAMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5 ) /**< (AC97C) */ ++#define AT91C_AC97C_ENDTX (0x1 << 10) /**< (AC97C) */ ++#define AT91C_AC97C_TXBUFE (0x1 << 11) /**< (AC97C) */ ++#define AT91C_AC97C_ENDRX (0x1 << 14) /**< (AC97C) */ ++#define AT91C_AC97C_RXBUFF (0x1 << 15) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE (0x3 << 16) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE_20_BITS (0x0 << 16) /**< (AC97C) Data size is 20 bits */ ++#define AT91C_AC97C_SIZE_18_BITS (0x1 << 16) /**< (AC97C) Data size is 18 bits */ ++#define AT91C_AC97C_SIZE_16_BITS (0x2 << 16) /**< (AC97C) Data size is 16 bits */ ++#define AT91C_AC97C_SIZE_10_BITS (0x3 << 16) /**< (AC97C) Data size is 10 bits */ ++#define AT91C_AC97C_CEM (0x1 << 18) /**< (AC97C) */ ++#define AT91C_AC97C_CEN (0x1 << 21) /**< (AC97C) */ ++#define AT91C_AC97C_PDCEN (0x1 << 22) /**< (AC97C) */ ++/* --- Register AC97C_CBRHR */ ++#define AT91C_AC97C_RDATA (0xFFFFF << 0 ) /**< (AC97C) Receive data */ ++/* --- Register AC97C_CBTHR */ ++#define AT91C_AC97C_TDATA (0xFFFFF << 0 ) /**< (AC97C) Transmit data */ ++/* --- Register AC97C_CBSR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5 ) /**< (AC97C) */ ++/* --- Register AC97C_CBMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5 ) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE (0x3 << 16) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE_20_BITS (0x0 << 16) /**< (AC97C) Data size is 20 bits */ ++#define AT91C_AC97C_SIZE_18_BITS (0x1 << 16) /**< (AC97C) Data size is 18 bits */ ++#define AT91C_AC97C_SIZE_16_BITS (0x2 << 16) /**< (AC97C) Data size is 16 bits */ ++#define AT91C_AC97C_SIZE_10_BITS (0x3 << 16) /**< (AC97C) Data size is 10 bits */ ++#define AT91C_AC97C_CEM (0x1 << 18) /**< (AC97C) */ ++#define AT91C_AC97C_CEN (0x1 << 21) /**< (AC97C) */ ++/* --- Register AC97C_CORHR */ ++#define AT91C_AC97C_SDATA (0xFFFF << 0 ) /**< (AC97C) Status Data */ ++/* --- Register AC97C_COTHR */ ++#define AT91C_AC97C_CDATA (0xFFFF << 0 ) /**< (AC97C) Command Data */ ++#define AT91C_AC97C_CADDR (0x7F << 16) /**< (AC97C) COdec control register index */ ++#define AT91C_AC97C_READ (0x1 << 23) /**< (AC97C) Read/Write command */ ++/* --- Register AC97C_COSR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++/* --- Register AC97C_COMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4 ) /**< (AC97C) */ ++/* --- Register AC97C_SR */ ++#define AT91C_AC97C_SOF (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3 ) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4 ) /**< (AC97C) */ ++/* --- Register AC97C_IER */ ++#define AT91C_AC97C_SOF (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3 ) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4 ) /**< (AC97C) */ ++/* --- Register AC97C_IDR */ ++#define AT91C_AC97C_SOF (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3 ) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4 ) /**< (AC97C) */ ++/* --- Register AC97C_IMR */ ++#define AT91C_AC97C_SOF (0x1 << 0 ) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1 ) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2 ) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3 ) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4 ) /**< (AC97C) */ ++ ++#endif /* __AC97C_H */ +diff -urNp linux-2.6.28-at91/arch/arm/mach-at91/Kconfig linux-2.6.28-at91-ronetix/arch/arm/mach-at91/Kconfig +--- linux-2.6.28-at91/arch/arm/mach-at91/Kconfig 2009-01-12 15:59:27.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/arch/arm/mach-at91/Kconfig 2009-01-12 16:00:41.000000000 +0100 +@@ -280,6 +280,13 @@ config MACH_NEOCORE926 + help + Select this if you are using the Adeneo Neocore 926 board. + ++config MACH_PM9263 ++ bool "Ronetix PM9263 Evaluation Kit" ++ depends on ARCH_AT91SAM9263 ++ help ++ Select this if you are using Ronetix's PM9263 board. ++ <http://ronetix.at/starter_kit_9263.html> ++ + endif + + # ---------------------------------------------------------- +@@ -347,13 +354,13 @@ comment "AT91 Board Options" + + config MTD_AT91_DATAFLASH_CARD + bool "Enable DataFlash Card support" +- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_TOTEMNOVA || MACH_NEOCORE926) ++ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_TOTEMNOVA || MACH_NEOCORE926 || MACH_PM9263) + help + Enable support for the DataFlash card. + + config MTD_NAND_ATMEL_BUSWIDTH_16 + bool "Enable 16-bit data bus interface to NAND flash" +- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) ++ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK || MACH_PM9263) + help + On AT91SAM926x boards both types of NAND flash can be present + (8 and 16 bit data bus width). +diff -urNp linux-2.6.28-at91/arch/arm/mach-at91/Makefile linux-2.6.28-at91-ronetix/arch/arm/mach-at91/Makefile +--- linux-2.6.28-at91/arch/arm/mach-at91/Makefile 2009-01-12 15:59:27.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/arch/arm/mach-at91/Makefile 2009-01-12 16:00:41.000000000 +0100 +@@ -54,6 +54,7 @@ obj-$(CONFIG_MACH_USB_A9263) += board-us + obj-$(CONFIG_MACH_CSB737) += board-csb737.o + obj-$(CONFIG_MACH_TOTEMNOVA) += board-totemnova.o + obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o ++obj-$(CONFIG_MACH_PM9263) += board-pm9263.o + + # AT91SAM9RL board-specific support + obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o +diff -urNp linux-2.6.28-at91/drivers/pcmcia/at91_cf.c linux-2.6.28-at91-ronetix/drivers/pcmcia/at91_cf.c +--- linux-2.6.28-at91/drivers/pcmcia/at91_cf.c 2009-01-12 15:59:27.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/drivers/pcmcia/at91_cf.c 2009-01-12 16:00:42.000000000 +0100 +@@ -27,7 +27,7 @@ + + #if defined(CONFIG_ARCH_AT91RM9200) + #include <mach/at91rm9200_mc.h> +-#elif defined(CONFIG_ARCH_AT91SAM9260) ++#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) + #include <mach/at91sam9_smc.h> + #else + #error "Unsupported AT91 processor" +@@ -138,7 +138,8 @@ at91_cf_set_socket(struct pcmcia_socket + } + + /* toggle reset if needed */ +- gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET); ++ if (cf->board->rst_pin) ++ gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET); + + pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n", + driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask); +diff -urNp linux-2.6.28-at91/drivers/pcmcia/Kconfig linux-2.6.28-at91-ronetix/drivers/pcmcia/Kconfig +--- linux-2.6.28-at91/drivers/pcmcia/Kconfig 2009-01-12 15:59:27.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/drivers/pcmcia/Kconfig 2009-01-12 16:00:42.000000000 +0100 +@@ -270,7 +270,7 @@ config BFIN_CFPCMCIA + + config AT91_CF + tristate "AT91 CompactFlash Controller" +- depends on PCMCIA && (ARCH_AT91RM9200 || ARCH_AT91SAM9260) ++ depends on PCMCIA && (ARCH_AT91RM9200 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263) + help + Say Y here to support the CompactFlash controller on AT91 chips. + Or choose M to compile the driver as a module named "at91_cf". +diff -urNp linux-2.6.28-at91/sound/arm/at91-ac97.c.rej linux-2.6.28-at91-ronetix/sound/arm/at91-ac97.c.rej +--- linux-2.6.28-at91/sound/arm/at91-ac97.c.rej 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/sound/arm/at91-ac97.c.rej 2009-01-12 16:00:43.000000000 +0100 +@@ -0,0 +1,702 @@ ++*************** ++*** 0 **** ++--- 1,699 ---- +++ /* drivers/sound/arm/at91-ac97c.c +++ * +++ * Driver for the Atmel AC97 Controller +++ * +++ * Copyright (C) 2005 Atmel Norway +++ */ +++ +++ #define CAPTURE 0 +++ +++ #define EXTRA_DEBUG 0 +++ +++ #undef DEBUG +++ #include <linux/platform_device.h> +++ #include <linux/module.h> +++ #include <linux/init.h> +++ #include <linux/interrupt.h> +++ #include <linux/delay.h> +++ #include <linux/clk.h> +++ #include <linux/atmel_pdc.h> +++ +++ //#include <sound/driver.h> +++ #include <sound/core.h> +++ #include <sound/initval.h> +++ #include <sound/pcm.h> +++ #include <sound/ac97_codec.h> +++ +++ #include <asm/io.h> +++ #include <mach/hardware.h> +++ #include <asm/cacheflush.h> +++ +++ #include <mach/gpio.h> +++ #include <mach/at91_ac97c.h> +++ #include <mach/board.h> +++ +++ #define platform_num_resources(dev) ((dev)->num_resources) +++ #define platform_resource_start(dev, i) ((dev)->resource[(i)].start) +++ #define platform_resource_end(dev, i) ((dev)->resource[(i)].end) +++ #define platform_resource_flags(dev, i) ((dev)->resource[(i)].flags) +++ #define platform_resource_len(dev, i) \ +++ (platform_resource_end((dev), (i)) - \ +++ platform_resource_start((dev), (i)) + 1) +++ +++ +++ /* module parameters */ +++ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +++ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +++ static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; +++ +++ module_param_array(index, int, NULL, 0444); +++ MODULE_PARM_DESC(index, "Index value for AC97 controller"); +++ module_param_array(id, charp, NULL, 0444); +++ MODULE_PARM_DESC(id, "ID string for AC97 controller"); +++ module_param_array(enable, bool, NULL, 0444); +++ MODULE_PARM_DESC(enable, "Enable AC97 controller"); +++ +++ typedef struct at91_ac97 { +++ spinlock_t lock; +++ void *regs; +++ int period; +++ struct clk *ac97_clk; +++ struct snd_pcm_substream *playback_substream; +++ struct snd_card *card; +++ struct snd_pcm *pcm; +++ struct snd_ac97 *ac97; +++ struct snd_ac97_bus *ac97_bus; +++ int irq; +++ struct platform_device *pdev; +++ u8 reset_pin; +++ } at91_ac97_t; +++ +++ #define get_chip(card) ((at91_ac97_t *)(card)->private_data) +++ +++ #define ac97c_writel(chip, reg, val) \ +++ writel((val), (chip)->regs + AC97C_##reg) +++ +++ #define ac97c_readl(chip, reg) \ +++ readl((chip)->regs + AC97C_##reg) +++ +++ // PIO management functions +++ void at91_ac97c_drive_reset(at91_ac97_t *chip, unsigned int value) +++ { +++ if (chip->reset_pin) +++ at91_set_gpio_value(chip->reset_pin, value); +++ } +++ +++ +++ static const char driver_name[] = "at91-ac97"; +++ +++ /* PCM part */ +++ +++ static struct snd_pcm_hardware snd_at91_ac97_hw = { +++ .info = (SNDRV_PCM_INFO_INTERLEAVED +++ | SNDRV_PCM_INFO_MMAP +++ | SNDRV_PCM_INFO_MMAP_VALID +++ | SNDRV_PCM_INFO_BLOCK_TRANSFER), +++ .formats = SNDRV_PCM_FMTBIT_S16_LE, +++ .rates = SNDRV_PCM_RATE_CONTINUOUS, +++ .rate_min = 8000, +++ .rate_max = 48000, +++ .channels_min = 2, +++ .channels_max = 2, +++ .buffer_bytes_max = 256*1024, +++ .period_bytes_min = 1024, +++ .period_bytes_max = 4*1024, +++ .periods_min = 1, +++ .periods_max = 64, +++ }; +++ +++ static int snd_at91_ac97_playback_open(struct snd_pcm_substream *substream) +++ { +++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); +++ struct snd_pcm_runtime *runtime = substream->runtime; +++ +++ runtime->hw = snd_at91_ac97_hw; +++ chip->playback_substream = substream; +++ chip->period = 0; +++ +++ snd_printd(KERN_DEBUG "%s : snd_at91_ac97_playback_open\n\r", driver_name); +++ +++ return 0; +++ } +++ +++ static int snd_at91_ac97_playback_close(struct snd_pcm_substream *substream) +++ { +++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); +++ +++ chip->playback_substream = NULL; +++ return 0; +++ } +++ +++ static int snd_at91_ac97_hw_params(struct snd_pcm_substream *substream, +++ struct snd_pcm_hw_params *hw_params) +++ { +++ int err; +++ +++ err = snd_pcm_lib_malloc_pages(substream, +++ params_buffer_bytes(hw_params)); +++ return err; +++ } +++ +++ static int snd_at91_ac97_hw_free(struct snd_pcm_substream *substream) +++ { +++ +++ snd_pcm_lib_free_pages(substream); +++ +++ return 0; +++ } +++ +++ static int snd_at91_ac97_playback_prepare(struct snd_pcm_substream *substream) +++ { +++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); +++ struct snd_pcm_runtime *runtime = substream->runtime; +++ int block_size = frames_to_bytes(runtime, runtime->period_size); +++ unsigned long word = 0; +++ +++ //clean_dcache_region(runtime->dma_area, block_size * 2); +++ snd_printd(KERN_DEBUG "%s : block_size = %d\n\r", driver_name, block_size); +++ +++ /* Assign slots to channels */ +++ switch (substream->runtime->channels) { +++ /* TODO: Support more than two channels */ +++ case 1: +++ word |= AT91C_AC97C_CHID3_CA; +++ break; +++ case 2: +++ default: +++ /* Assign Left and Right slots (3,4) to Channel A */ +++ word |= AT91C_AC97C_CHID3_CA | AT91C_AC97C_CHID4_CA; +++ break; +++ } +++ +++ ac97c_writel(chip, OCA, word); +++ +++ /* +++ * Configure sample format and size. +++ * FIXME: Avoid conflicts with capture channel. +++ */ +++ word = AT91C_AC97C_PDCEN | AT91C_AC97C_SIZE_16_BITS; +++ +++ switch (runtime->format){ +++ case SNDRV_PCM_FORMAT_S16_BE: +++ word |= AT91C_AC97C_CEM; +++ break; +++ case SNDRV_PCM_FORMAT_S16_LE: +++ default: +++ break; +++ } +++ +++ ac97c_writel(chip, CAMR, word); +++ +++ /* Set variable rate if needed */ +++ if ( runtime->rate != 48000 ){ +++ word = ac97c_readl(chip, MR); +++ word |= AT91C_AC97C_VRA; +++ ac97c_writel(chip, MR, word); +++ } else { +++ /* Clear Variable Rate Bit */ +++ word = ac97c_readl(chip, MR); +++ word &= ~AT91C_AC97C_VRA; +++ ac97c_writel(chip, MR, word); +++ } +++ +++ /* Set rate */ +++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate); +++ +++ snd_printd(KERN_DEBUG +++ "%s : dma_addr = %x\n\r" +++ " : dma_area = %p\n\r" +++ " : dma_bytes = %d\n\r", +++ driver_name, runtime->dma_addr, +++ runtime->dma_area, runtime->dma_bytes); +++ +++ /* Initialize and start the PDC */ +++ writel(runtime->dma_addr, chip->regs + ATMEL_PDC_TPR); +++ writel(block_size / 2, chip->regs + ATMEL_PDC_TCR); +++ writel(runtime->dma_addr + block_size, chip->regs + ATMEL_PDC_TNPR); +++ writel(block_size / 2, chip->regs + ATMEL_PDC_TNCR); +++ +++ /* Enable Channel A interrupts */ +++ ac97c_writel(chip, IER, AT91C_AC97C_CAEVT); +++ +++ snd_printd(KERN_DEBUG "%s : snd_at91_ac97_playback_prepare\n\r", driver_name); +++ +++ return 0; +++ } +++ +++ static int at91_ac97_trigger(struct snd_pcm_substream *substream, int cmd) +++ { +++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); +++ unsigned long camr, ptcr = 0, flags; +++ int err = 0; +++ +++ spin_lock_irqsave(&chip->lock, flags); +++ camr = ac97c_readl(chip, CAMR); +++ +++ switch (cmd) { +++ case SNDRV_PCM_TRIGGER_START: +++ camr |= (AT91C_AC97C_CEN | AT91C_AC97C_ENDTX); +++ ptcr = ATMEL_PDC_TXTEN; +++ break; +++ case SNDRV_PCM_TRIGGER_STOP: +++ camr &= ~(AT91C_AC97C_CEN | AT91C_AC97C_ENDTX); +++ ptcr = ATMEL_PDC_TXTDIS; +++ break; +++ default: +++ err = -EINVAL; +++ break; +++ } +++ +++ ac97c_writel(chip, CAMR, camr); +++ writel(ptcr, chip->regs + ATMEL_PDC_PTCR); +++ +++ spin_unlock_irqrestore(&chip->lock, flags); +++ +++ snd_printd(KERN_DEBUG "%s : snd_at91_ac97_trigger\n\r", driver_name); +++ +++ return err; +++ } +++ +++ static snd_pcm_uframes_t snd_at91_ac97_pointer(struct snd_pcm_substream *substream) +++ { +++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); +++ struct snd_pcm_runtime *runtime = substream->runtime; +++ snd_pcm_uframes_t pos; +++ unsigned long bytes; +++ +++ bytes = readl(chip->regs + ATMEL_PDC_TPR) - runtime->dma_addr; +++ +++ pos = bytes_to_frames(runtime, bytes); +++ if (pos >= runtime->buffer_size) +++ pos -= runtime->buffer_size; +++ +++ snd_printd(KERN_DEBUG "%s : snd_at91_ac97_pointer\n\r", driver_name); +++ +++ return pos; +++ } +++ +++ static struct snd_pcm_ops at91_ac97_playback_ops = { +++ .open = snd_at91_ac97_playback_open, +++ .close = snd_at91_ac97_playback_close, +++ .ioctl = snd_pcm_lib_ioctl, +++ .hw_params = snd_at91_ac97_hw_params, +++ .hw_free = snd_at91_ac97_hw_free, +++ .prepare = snd_at91_ac97_playback_prepare, +++ .trigger = at91_ac97_trigger, +++ .pointer = snd_at91_ac97_pointer, +++ }; +++ +++ #if CAPTURE +++ static struct snd_pcm_ops at91_ac97_capture_ops = { +++ .open = snd_at91_ac97_playback_open, +++ .close = snd_at91_ac97_playback_close, +++ .ioctl = snd_pcm_lib_ioctl, +++ .hw_params = snd_at91_ac97_hw_params, +++ .hw_free = snd_at91_ac97_hw_free, +++ .prepare = snd_at91_ac97_playback_prepare, +++ .trigger = at91_ac97_trigger, +++ .pointer = snd_at91_ac97_pointer, +++ }; +++ #endif +++ +++ static struct ac97_pcm at91_ac97_pcm_defs[] __devinitdata = { +++ /* Playback */ +++ { +++ .exclusive = 1, +++ .r = { { +++ .slots = ((1 << AC97_SLOT_PCM_LEFT) +++ | (1 << AC97_SLOT_PCM_RIGHT)), +++ } }, +++ }, +++ #if CAPTURE +++ { /* Mic in */ +++ .stream = 1, +++ .exclusive = 1, +++ .r = { +++ [0] = { +++ .slots = (1 << AC97_SLOT_MIC), +++ }, +++ }, +++ } +++ #endif +++ }; +++ +++ static int __devinit snd_at91_ac97_pcm_new(at91_ac97_t *chip) +++ { +++ struct snd_pcm *pcm; +++ int err; +++ +++ err = snd_ac97_pcm_assign(chip->ac97_bus, 1, at91_ac97_pcm_defs); +++ if (err) +++ return err; +++ +++ err = snd_pcm_new(chip->card, "Atmel AC97", 0, 1, 0, &pcm); +++ if (err) +++ return err; +++ +++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, +++ &chip->pdev->dev, +++ 128 * 1024, 256 * 1024); +++ +++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &at91_ac97_playback_ops); +++ #if CAPTURE +++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &at91_ac97_capture_ops); +++ #endif +++ pcm->private_data = chip; +++ pcm->info_flags = 0; +++ strcpy(pcm->name, "Atmel AC97"); +++ chip->pcm = pcm; +++ +++ return 0; +++ } +++ +++ /* Mixer part */ +++ static int snd_at91_ac97_mixer_new(at91_ac97_t *chip) +++ { +++ int err; +++ struct snd_ac97_template template; +++ +++ memset(&template, 0, sizeof(template)); +++ template.private_data = chip; +++ template.num = 0; +++ template.addr = 0; +++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97); +++ +++ return err; +++ } +++ +++ +++ static irqreturn_t snd_at91_ac97_interrupt(int irq, void *dev_id) +++ { +++ at91_ac97_t *chip = dev_id; +++ unsigned long status; +++ unsigned long dummy; +++ +++ status = ac97c_readl(chip, SR); +++ +++ if (status & AT91C_AC97C_CAEVT) { +++ struct snd_pcm_runtime *runtime; +++ int offset, next_period, block_size; +++ unsigned long casr; +++ +++ runtime = chip->playback_substream->runtime; +++ block_size = frames_to_bytes(runtime, runtime->period_size); +++ +++ casr = ac97c_readl(chip, CASR); +++ +++ if (casr & AT91C_AC97C_ENDTX) { +++ chip->period++; +++ if (chip->period == runtime->periods) +++ chip->period = 0; +++ next_period = chip->period + 1; +++ if (next_period == runtime->periods) +++ next_period = 0; +++ +++ offset = block_size * next_period; +++ +++ writel(runtime->dma_addr + offset, chip->regs + ATMEL_PDC_TNPR); +++ writel(block_size / 2, chip->regs + ATMEL_PDC_TNCR); +++ +++ snd_pcm_period_elapsed(chip->playback_substream); +++ } else { +++ printk(KERN_WARNING +++ "Spurious AC97A interrupt, status = 0x%08lx\n", +++ (unsigned long)casr); +++ } +++ } else { +++ printk(KERN_WARNING +++ "Spurious AC97 interrupt, status = 0x%08lx\n", +++ status); +++ } +++ +++ dummy = ac97c_readl(chip, SR); +++ +++ return IRQ_HANDLED; +++ } +++ +++ +++ /* CODEC part */ +++ +++ static void snd_at91_ac97_hard_reset(at91_ac97_t *chip) +++ { +++ // Enable AC97 Controller. +++ // Perform a cold (hard) reset of the AC97 codec. +++ ac97c_writel(chip, MR, 0); +++ ac97c_writel(chip, MR, AT91C_AC97C_ENA); +++ +++ at91_ac97c_drive_reset(chip, 0); +++ udelay(1); +++ at91_ac97c_drive_reset(chip, 1); +++ udelay(1); +++ } +++ +++ +++ static void snd_at91_ac97_write(struct snd_ac97 *ac97, unsigned short reg, +++ unsigned short val) +++ { +++ at91_ac97_t *chip = ac97->private_data; +++ unsigned long word; +++ int timeout = 0x100; +++ +++ snd_printd(KERN_DEBUG "%s : Writing codec register 0x%x = 0x%x\n\r", driver_name, reg, val); +++ +++ word = (reg & 0x7f) << 16 | val; +++ +++ do { +++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_TXRDY) { +++ ac97c_writel(chip, COTHR, word); +++ return; +++ } +++ udelay(1); +++ } while (--timeout); +++ +++ snd_printk(KERN_WARNING "at91-ac97: codec write timeout\n\r"); +++ } +++ +++ static unsigned short snd_at91_ac97_read(struct snd_ac97 *ac97, +++ unsigned short reg) +++ { +++ at91_ac97_t *chip = ac97->private_data; +++ unsigned long word; +++ int timeout = 0x100; +++ +++ +++ word = (0x80 | (reg & 0x7f)) << 16; +++ +++ do { +++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_TXRDY){ +++ ac97c_writel(chip, COTHR, word); +++ break; +++ } +++ udelay(1); +++ } while (--timeout); +++ +++ if (!timeout) +++ goto timed_out; +++ +++ timeout = 0x100; +++ +++ do { +++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_RXRDY){ +++ unsigned short val = (unsigned short) ac97c_readl(chip, CORHR); +++ return val; +++ } +++ udelay(1); +++ } while (--timeout); +++ +++ if (!timeout) +++ goto timed_out1; +++ +++ timed_out: +++ snd_printk(KERN_WARNING "at91-ac97: codec read timeout\n\r"); +++ return 0xffff; +++ +++ timed_out1: +++ #if EXTRA_DEBUG +++ snd_printk(KERN_WARNING "at91-ac97: codec read timeout 1\n\r"); +++ #endif +++ return 0xffff; +++ } +++ +++ static void snd_at91_ac97_warm_reset(struct snd_ac97 *ac97) +++ { +++ at91_ac97_t *chip = ac97->private_data; +++ volatile unsigned int mr = ac97c_readl(chip, MR); +++ +++ mr |= AT91C_AC97C_WRST; +++ +++ ac97c_writel(chip, MR, mr); +++ udelay(1); +++ +++ mr &= ~AT91C_AC97C_WRST; +++ ac97c_writel(chip, MR, mr); +++ } +++ +++ static void snd_at91_ac97_destroy(struct snd_card *card) +++ { +++ at91_ac97_t *chip = get_chip(card); +++ +++ #if 0 +++ // Disable AC97 Controller +++ ac97c_writel(chip, MR, 0); +++ +++ // Disable AC97 Controller clock +++ if (chip->ac97_clk) clk_disable(chip->ac97_clk); +++ #endif +++ if (chip->irq != -1) { +++ free_irq(chip->irq, chip); +++ chip->irq = -1; +++ } +++ if (chip->regs) { +++ iounmap(chip->regs); +++ chip->regs = NULL; +++ } +++ } +++ +++ static int __devinit snd_at91_ac97_create(struct snd_card *card, +++ struct platform_device *pdev) +++ { +++ static struct snd_ac97_bus_ops ops = { +++ .write = snd_at91_ac97_write, +++ .read = snd_at91_ac97_read, +++ .reset = snd_at91_ac97_warm_reset, +++ }; +++ +++ at91_ac97_t *chip = get_chip(card); +++ int irq, err = 0; +++ +++ card->private_free = snd_at91_ac97_destroy; +++ +++ spin_lock_init(&chip->lock); +++ chip->card = card; +++ chip->pdev = pdev; +++ chip->irq = -1; +++ +++ if (!(platform_resource_flags(pdev, 0) & IORESOURCE_MEM) +++ || !(platform_resource_flags(pdev, 1) & IORESOURCE_IRQ)) +++ return -ENODEV; +++ +++ irq = platform_resource_start(pdev, 1); +++ +++ err = request_irq(irq, snd_at91_ac97_interrupt, 0, "ac97", chip); +++ if (err) { +++ snd_printk(KERN_WARNING "unable to request IRQ%d\n", irq); +++ return err; +++ } +++ +++ chip->irq = irq; +++ #if EXTRA_DEBUG +++ snd_printk(KERN_INFO "AC97C regs = %08X \n", platform_resource_start(pdev, 0)); +++ snd_printk(KERN_INFO "AC97C irq = %d \n",irq); +++ #endif +++ +++ chip->regs = ioremap(platform_resource_start(pdev, 0), +++ platform_resource_len(pdev, 0)); +++ if (!chip->regs) { +++ snd_printk(KERN_WARNING "unable to remap AC97C io memory\n"); +++ return -ENOMEM; +++ } +++ +++ snd_card_set_dev(card, &pdev->dev); +++ +++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus); +++ +++ return err; +++ } +++ +++ static int __devinit snd_at91_ac97_probe(struct platform_device *pdev) +++ { +++ static int dev; +++ struct atmel_ac97_data *pdata = pdev->dev.platform_data; +++ struct snd_card *card; +++ at91_ac97_t *chip; +++ int err; +++ +++ if (dev >= SNDRV_CARDS) +++ return -ENODEV; +++ if (!enable[dev]) { +++ dev++; +++ return -ENOENT; +++ } +++ card = snd_card_new(index[dev], id[dev], THIS_MODULE, +++ sizeof(at91_ac97_t)); +++ if (!card) +++ return -ENOMEM; +++ chip = get_chip(card); +++ +++ err = snd_at91_ac97_create(card, pdev); +++ if (err) +++ goto out_free_card; +++ +++ // Enable AC97 Controller clock +++ chip->reset_pin = pdata->reset_pin; +++ chip->ac97_clk = clk_get(NULL, "ac97_clk"); +++ if(!chip->ac97_clk) +++ goto out_free_card; +++ +++ clk_enable(chip->ac97_clk); +++ +++ // Perform a codec hard reset. +++ // This also enables the AC97 Controller. +++ snd_at91_ac97_hard_reset(chip); +++ +++ err = snd_at91_ac97_mixer_new(chip); +++ if (err) +++ goto out_free_card; +++ +++ err = snd_at91_ac97_pcm_new(chip); +++ if (err) +++ goto out_free_card; +++ +++ +++ strcpy(card->driver, "ac97c"); +++ strcpy(card->shortname, "Atmel AC97"); +++ sprintf(card->longname, "Atmel AC97 Controller at %#lx, irq %i", +++ (unsigned long) platform_resource_start(pdev, 0), (int) chip->irq); +++ +++ err = snd_card_register(card); +++ if (err) +++ goto out_free_card; +++ +++ dev_set_drvdata(&pdev->dev, card); +++ dev++; +++ return 0; +++ +++ out_free_card: +++ snd_card_free(card); +++ return err; +++ } +++ +++ static int __devexit snd_at91_ac97_remove(struct platform_device *pdev) +++ { +++ struct snd_card *card = dev_get_drvdata(&pdev->dev); +++ at91_ac97_t *chip; +++ +++ +++ if (! card) return 0; +++ +++ chip = get_chip(card); +++ +++ snd_card_free(card); +++ +++ // Disable AC97 Controller +++ ac97c_writel(chip, MR, 0); +++ +++ // Disable AC97 Controller clock +++ clk_disable(chip->ac97_clk); +++ +++ dev_set_drvdata(&pdev->dev, NULL); +++ +++ return 0; +++ } +++ +++ static struct platform_driver at91_ac97_driver = +++ { +++ .probe = snd_at91_ac97_probe, +++ .remove = __devexit_p(snd_at91_ac97_remove), +++ .driver = +++ { +++ .name = "ac97c", +++ } +++ , +++ }; +++ +++ static int __init at91_ac97_init(void) +++ { +++ return platform_driver_register(&at91_ac97_driver); +++ } +++ +++ static void __exit at91_ac97_exit(void) +++ { +++ platform_driver_unregister(&at91_ac97_driver); +++ } +++ +++ module_init(at91_ac97_init); +++ module_exit(at91_ac97_exit); +++ +++ MODULE_LICENSE("GPL"); +++ MODULE_DESCRIPTION("Driver for Atmel AC97 Controller"); +++ MODULE_AUTHOR("Atmel"); +diff -urNp linux-2.6.28-at91/sound/arm/Kconfig linux-2.6.28-at91-ronetix/sound/arm/Kconfig +--- linux-2.6.28-at91/sound/arm/Kconfig 2009-01-12 15:59:32.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/sound/arm/Kconfig 2009-01-12 16:00:42.000000000 +0100 +@@ -59,5 +59,14 @@ config SND_AT91_AC97 + Say Y or M if you want to support any AC97 codec attached to + the SAM926X AC97 Controller. + ++config SND_AT91_AC97 ++ tristate "AC97 Controller driver for SAM926X familly from ATMEL" ++ depends on SND && ARCH_AT91SAM9263 ++ select SND_PCM ++ select SND_AC97_CODEC ++ help ++ Say Y or M if you want to support any AC97 codec attached to ++ the SAM926X AC97 Controller. ++ + endif # SND_ARM + +diff -urNp linux-2.6.28-at91/sound/arm/Kconfig.orig linux-2.6.28-at91-ronetix/sound/arm/Kconfig.orig +--- linux-2.6.28-at91/sound/arm/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/sound/arm/Kconfig.orig 2009-01-12 16:00:31.000000000 +0100 +@@ -0,0 +1,63 @@ ++# ALSA ARM drivers ++ ++menuconfig SND_ARM ++ bool "ARM sound devices" ++ depends on ARM ++ default y ++ help ++ Support for sound devices specific to ARM architectures. ++ Drivers that are implemented on ASoC can be found in ++ "ALSA for SoC audio support" section. ++ ++if SND_ARM ++ ++config SND_SA11XX_UDA1341 ++ tristate "SA11xx UDA1341TS driver (iPaq H3600)" ++ depends on ARCH_SA1100 && L3 ++ select SND_PCM ++ help ++ Say Y here if you have a Compaq iPaq H3x00 handheld computer ++ and want to use its Philips UDA 1341 audio chip. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called snd-sa11xx-uda1341. ++ ++config SND_ARMAACI ++ tristate "ARM PrimeCell PL041 AC Link support" ++ depends on ARM_AMBA ++ select SND_PCM ++ select SND_AC97_CODEC ++ ++config SND_PXA2XX_PCM ++ tristate ++ select SND_PCM ++ ++config SND_PXA2XX_LIB ++ tristate ++ select SND_AC97_CODEC if SND_PXA2XX_LIB_AC97 ++ ++config SND_PXA2XX_LIB_AC97 ++ bool ++ ++config SND_PXA2XX_AC97 ++ tristate "AC97 driver for the Intel PXA2xx chip" ++ depends on ARCH_PXA ++ select SND_PXA2XX_PCM ++ select SND_AC97_CODEC ++ select SND_PXA2XX_LIB ++ select SND_PXA2XX_LIB_AC97 ++ help ++ Say Y or M if you want to support any AC97 codec attached to ++ the PXA2xx AC97 interface. ++ ++config SND_AT91_AC97 ++ tristate "AC97 Controller driver for SAM926X familly from ATMEL" ++ depends on SND && ARCH_AT91 ++ select SND_PCM ++ select SND_AC97_CODEC ++ help ++ Say Y or M if you want to support any AC97 codec attached to ++ the SAM926X AC97 Controller. ++ ++endif # SND_ARM ++ +diff -urNp linux-2.6.28-at91/sound/arm/Makefile.orig linux-2.6.28-at91-ronetix/sound/arm/Makefile.orig +--- linux-2.6.28-at91/sound/arm/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/sound/arm/Makefile.orig 2009-01-12 16:00:31.000000000 +0100 +@@ -0,0 +1,23 @@ ++# ++# Makefile for ALSA ++# ++ ++obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o ++snd-sa11xx-uda1341-objs := sa11xx-uda1341.o ++ ++obj-$(CONFIG_SND_ARMAACI) += snd-aaci.o ++snd-aaci-objs := aaci.o devdma.o ++ ++obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o ++snd-pxa2xx-pcm-objs := pxa2xx-pcm.o ++ ++obj-$(CONFIG_SND_PXA2XX_LIB) += snd-pxa2xx-lib.o ++snd-pxa2xx-lib-y := pxa2xx-pcm-lib.o ++snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_AC97) += pxa2xx-ac97-lib.o ++ ++obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o ++snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++ ++obj-$(CONFIG_SND_AT91_AC97) += snd-at91-ac97.o ++snd-at91-ac97-objs := at91-ac97.o ++ +diff -urNp linux-2.6.28-at91/sound/arm/Makefile.rej linux-2.6.28-at91-ronetix/sound/arm/Makefile.rej +--- linux-2.6.28-at91/sound/arm/Makefile.rej 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.28-at91-ronetix/sound/arm/Makefile.rej 2009-01-12 16:00:42.000000000 +0100 +@@ -0,0 +1,12 @@ ++*************** ++*** 17,19 **** ++ ++ obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o ++ snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++--- 17,22 ---- ++ ++ obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o ++ snd-pxa2xx-ac97-objs := pxa2xx-ac97.o +++ +++ obj-$(CONFIG_SND_AT91_AC97) += snd-at91-ac97.o +++ snd-at91-ac97-objs := at91-ac97.o diff --git a/recipes/linux/linux-2.6.28/stb225/defconfig b/recipes/linux/linux-2.6.28/stb225/defconfig new file mode 100644 index 0000000000..fe27cef677 --- /dev/null +++ b/recipes/linux/linux-2.6.28/stb225/defconfig @@ -0,0 +1,1247 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc1 +# Fri Jan 16 20:04:29 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MACH_EMMA is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +CONFIG_NXP_STB225=y +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SOC_PNX833X=y +CONFIG_SOC_PNX8335=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR2=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_128=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=128 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set + +# +# Control Group support +# +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=y +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_LE_BYTE_SWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_IP3902=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_VT_CONSOLE is not set +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PNX8XXX=y +CONFIG_SERIAL_PNX8XXX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=y +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# +# DVB-S (satellite) frontends +# +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set +# CONFIG_DVB_L64781 is not set +CONFIG_DVB_TDA1004X=y +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +# CONFIG_DVB_DIB7000M is not set +# CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set + +# +# DVB-C (cable) frontends +# +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_STV0297 is not set + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set +# CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# SEC control devices for DVB-S +# +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_STB225_FB=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_MIPS=y +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=m +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-2.6.28/stb225/ebase-fix.patch b/recipes/linux/linux-2.6.28/stb225/ebase-fix.patch new file mode 100644 index 0000000000..bdd82ac1d5 --- /dev/null +++ b/recipes/linux/linux-2.6.28/stb225/ebase-fix.patch @@ -0,0 +1,37 @@ +diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c +index f6083c6..b3bcd3a 100644 +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -1592,8 +1592,6 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, + #ifdef CONFIG_64BIT + unsigned long uncached_ebase = TO_UNCAC(ebase); + #endif +- if (cpu_has_mips_r2) +- ebase += (read_c0_ebase() & 0x3ffff000); + + if (!addr) + panic(panic_null_cerr); +@@ -1629,8 +1627,6 @@ void __init trap_init(void) + ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); + else { + ebase = CAC_BASE; +- if (cpu_has_mips_r2) +- ebase += (read_c0_ebase() & 0x3ffff000); + } + + per_cpu_trap_init(); +@@ -1739,11 +1735,11 @@ void __init trap_init(void) + + if (cpu_has_vce) + /* Special exception: R4[04]00 uses also the divec space. */ +- memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100); ++ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100); + else if (cpu_has_4kex) +- memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80); ++ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80); + else +- memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); ++ memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80); + + signal_init(); + #ifdef CONFIG_MIPS32_COMPAT diff --git a/recipes/linux/linux-2.6.28/stb225/enable-uart.patch b/recipes/linux/linux-2.6.28/stb225/enable-uart.patch new file mode 100644 index 0000000000..e7bb03441c --- /dev/null +++ b/recipes/linux/linux-2.6.28/stb225/enable-uart.patch @@ -0,0 +1,13 @@ +diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig +index 3e525e3..91d4470 100644 +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE + + config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" +- depends on MIPS && SOC_PNX8550 ++ depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 diff --git a/recipes/linux/linux-2.6.28/stb225/ip3902.patch b/recipes/linux/linux-2.6.28/stb225/ip3902.patch new file mode 100644 index 0000000000..3f911b661d --- /dev/null +++ b/recipes/linux/linux-2.6.28/stb225/ip3902.patch @@ -0,0 +1,1549 @@ +diff -urN --exclude=.svn linux-2.6.26-rc4.orig/drivers/net/ip3902.c linux-2.6.26-rc4/drivers/net/ip3902.c +--- linux-2.6.26-rc4.orig/drivers/net/ip3902.c 1970-01-01 +01:00:00.000000000 +0100 ++++ linux-2.6.26-rc4/drivers/net/ip3902.c 2008-06-06 11:29:24.000000000 +0100 +@@ -0,0 +1,1510 @@ ++/* ++ * ip3902.c: NXP ip3902 embedded 10/100 Ethernet controller support ++ * Copyright 2008 NXP Semiconductors ++ * Chris Steel <chris.steel@nxp.com> ++ * Daniel Laird <daniel.j.laird@nxp.com> ++ * ++ * Based on ax88796.c, by Ben Dooks. ++ * Based on previous ip3902.c by Nikita V. Youshchenko ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <linux/isapnp.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/timer.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++#include <linux/crc32.h> ++#include <linux/inet_lro.h> ++#include <asm/system.h> ++#include <linux/io.h> ++ ++#define DRVNAME "ip3902-eth" ++#define DRVVERSION "1.00" ++ ++/* "Strange hardware" support macros */ ++ ++/* These control endianness of descriptors and statuses. ++ * If none if LITTLE_ENDIAN_xxx and BIG_ENDIAN_xxx is defined, system endian ++ * is used for xxx */ ++#define LITTLE_ENDIAN_DESCRIPTORS ++#undef BIG_ENDIAN_DESCRIPTORS ++#undef LITTLE_ENDIAN_STATUSES ++#define BIG_ENDIAN_STATUSES ++ ++#define ETH_RX_SKB_SIZE 0x600 /* 1536 bytes, just over max mtu */ ++#define TX_RING_SIZE 64 ++#define RX_RING_SIZE 64 ++#define IP3902_NAPI_WEIGHT 48 ++#define MAX_LRO_DESCRIPTORS 6 ++#define LRO_THRESHOLD 3 ++ ++#define BYTES_IN_ETHERNET_CRC 4 ++#define MAX_DESCS_PER_SKB (MAX_SKB_FRAGS + 1) ++ ++#define NEXT_TX(i) (((i) == TX_RING_SIZE-1) ? 0 : (i)+1) ++#define NEXT_RX(i) (((i) == RX_RING_SIZE-1) ? 0 : (i)+1) ++ ++/* Access to IP3902 registers */ ++ ++/* Alcatel (Packet Engines) core registers */ ++#define MAC1_REG 0x000 /* R/W: MAC configuration register 1 */ ++#define MAC2_REG 0x004 /* R/W: MAC configuration register 2 */ ++#define IPGT_REG 0x008 /* R/W: Back-to-Back Inter-Packet-Gap register */ ++#define IPGR_REG 0x00c /* R/W: Non Back-to-Back Inter-Packet-Gap register */ ++#define CLRT_REG 0x010 /* R/W: Collision window / Retry register */ ++#define MAXF_REG 0x014 /* R/W: Maximum Frame register */ ++#define SUPP_REG 0x018 /* R/W: PHY Support register */ ++#define TEST_REG 0x01C /* R/W: Test register */ ++#define MCFG_REG 0x020 /* R/W: MII Mgmt Con???guration register */ ++#define MCMD_REG 0x024 /* R/W: MII Mgmt Command register */ ++#define MADR_REG 0x028 /* R/W: MII Mgmt Address register */ ++#define MWTD_REG 0x02C /* WO: MII Mgmt Write Data register */ ++#define MRDD_REG 0x030 /* RO: MII Mgmt Read Data register */ ++#define MIND_REG 0x034 /* RO: MII Mgmt Indicators register */ ++#define SA0_REG 0x040 /* R/W: Station Address 0 register */ ++#define SA1_REG 0x044 /* R/W: Station Address 1 register */ ++#define SA2_REG 0x048 /* R/W: Station Address 2 register */ ++ ++/* Control registers */ ++#define COMMAND_REG 0x100 /* R/W: Command register */ ++#define STATUS_REG 0x104 /* RO: Status register */ ++#define RX_DESC_REG 0x108 /* R/W: Receive descriptor base address register */ ++#define RX_STATUS_REG 0x10C /* R/W: Receive status base address register */ ++#define RX_DESC_NUMBER_REG 0x110 /* R/W: Receive number of descriptors register */ ++#define RX_PRODUCE_INDEX_REG 0x114 /* RO: Receive produce index register */ ++#define RX_CONSUME_INDEX_REG 0x118 /* R/W: Receive consume index register */ ++#define TX_DESC_REG 0x11C /* R/W: Non real-time transmit descriptor base address register */ ++#define TX_STATUS_REG 0x120 /* R/W: Non real-time transmit status base address register */ ++#define TX_DESC_NUMBER_REG 0x124 /* R/W: Non real-time transmit number of descriptors register */ ++#define TX_PRODUCE_INDEX_REG 0x128 /* R/W: Non real-time transmit produce index register */ ++#define TX_CONSUME_INDEX_REG 0x12C /* RO: Non real-time transmit consume index register */ ++#define TX_RT_DESC_REG 0x130 /* R/W: Real-time transmit descriptor base address register */ ++#define TX_RT_STATUS_REG 0x134 /* R/W: Real-time transmit status base address register */ ++#define TX_RT_DESC_NUMBER_REG 0x138 /* R/W: Real-time transmit number of descriptors register */ ++#define TX_RT_PRODUCE_INDEX_REG 0x13C /* R/W: Real-time transmit produce index register */ ++#define TX_RT_CONSUME_INDEX_REG 0x140 /* RO: Real-time transmit consume index register */ ++#define QOS_TIMEOUT_REG 0x148 /* R/W: Transmit quality of service time-out register */ ++#define TSV0_REG 0x158 /* RO: Transmit status vector 0 register */ ++#define TSV1_REG 0x15C /* RO: Transmit status vector 1 register */ ++#define RSV_REG 0x160 /* RO: Receive status vector register */ ++#define FC_COUNTER_REG 0x170 /* R/W: Flow control counter register */ ++#define FC_STATUS_REG 0x174 /* RO: Flow control status register */ ++ ++/* Rx filter registers */ ++#define FILTER_CTRL_REG 0x200 /* R/W: Receive filter control register */ ++#define FILTER_WOL_STATUS_REG 0x204 /* RO: Receive filter WoL status register */ ++#define FILTER_WOL_CLEAR_REG 0x208 /* WO: Receive filter WoL clear register */ ++#define HASH_FILTER_L_REG 0x210 /* R/W: Hash filter table LSBs register */ ++#define HASH_FILTER_H_REG 0x214 /* R/W: Hash filter table MSBs register */ ++ ++/* DVP Standard registers */ ++#define INT_STATUS_REG 0xFE0 /* RO: Interrupt status register */ ++#define INT_ENABLE_REG 0xFE4 /* R/W: Interrupt enable register */ ++#define INT_CLEAR_REG 0xFE8 /* WO: Interrupt clear register */ ++#define INT_SET_REG 0xFEC /* WO: Interrupt set register */ ++#define POWERDOWN_REG 0xFF4 /* R/W: Power-down register */ ++#define MODULE_ID_REG 0xFFC /* RO: Module ID register */ ++ ++/* Bits for MAC1 register */ ++#define MAC1_SOFT_RESET (1 << 15) ++#define MAC1_TX_FLOW_CONTROL (1 << 3) ++#define MAC1_RX_FLOW_CONTROL (1 << 2) ++#define MAC1_RECEIVE_PASS_ALL (1 << 1) ++#define MAC1_RECEIVE_ENABLE (1 << 0) ++ ++/* Bits for MAC2 register */ ++#define MAC2_AUTO_DETECT_PAD_ENABLE (1 << 7) ++#define MAC2_VLAN_PAD_ENABLE (1 << 6) ++#define MAC2_PAD_CRC_ENABLE (1 << 5) ++#define MAC2_CRC_ENABLE (1 << 4) ++#define MAC2_FULL_DUPLEX (1 << 0) ++ ++#define INITIAL_MAC2 (MAC2_AUTO_DETECT_PAD_ENABLE | MAC2_VLAN_PAD_ENABLE | MAC2_PAD_CRC_ENABLE | MAC2_CRC_ENABLE) ++ ++/* Recommended values for IPGT register (see sec. 3.3.2.3 0f datasheet */ ++#define IPGT_FD_VALUE 0x15 ++#define IPGT_HD_VALUE 0x12 ++ ++/* Bits for MCMD register */ ++#define MCMD_READ (1 << 0) ++ ++/* Bits for MIND register */ ++#define MIND_NOT_VALID (1 << 2) ++#define MIND_BUSY (1 << 0) ++ ++/* Bits for command register */ ++#define COMMAND_ENABLE_QOS (1 << 11) ++#define COMMAND_FULL_DUPLEX (1 << 10) ++#define COMMAND_RMII_MODE (1 << 9) ++#define COMMAND_TX_FLOW_CONTROL (1 << 8) ++#define COMMAND_PROMISC (1 << 7) ++#define COMMAND_ALLOW_SHORT (1 << 6) ++#define COMMAND_RX_RESET (1 << 5) ++#define COMMAND_TX_RESET (1 << 4) ++#define COMMAND_RESET (1 << 3) ++#define COMMAND_TX_RT_ENABLE (1 << 2) ++#define COMMAND_TX_ENABLE (1 << 1) ++#define COMMAND_RX_ENABLE (1 << 0) ++ ++/* Bits for receive filter control register */ ++#define FILTER_ACCEPT_SELF (1 << 5) ++#define FILTER_ACCEPT_MCAST_HASH (1 << 4) ++#define FILTER_ACCEPT_UCAST_HASH (1 << 3) ++#define FILTER_ACCEPT_MCAST_ANY (1 << 2) ++#define FILTER_ACCEPT_BCAST_ANY (1 << 1) ++#define FILTER_ACCEPT_UCAST_ANY (1 << 0) ++ ++/* Bits for interrupt registers */ ++#define WAKEUP_INT (1 << 13) ++#define SOFT_INT (1 << 12) ++#define TX_RT_DONE_INT (1 << 11) ++#define TX_RT_FINISHED_INT (1 << 10) ++#define TX_RT_ERROR_INT (1 << 9) ++#define TX_RT_UNDERRUN_INT (1 << 8) ++#define TX_DONE_INT (1 << 7) ++#define TX_FINISHED_INT (1 << 6) ++#define TX_ERROR_INT (1 << 5) ++#define TX_UNDERRUN_INT (1 << 4) ++#define RX_DONE_INT (1 << 3) ++#define RX_FINISHED_INT (1 << 2) ++#define RX_ERROR_INT (1 << 1) ++#define RX_OVERRUN_INT (1 << 0) ++ ++/* Bit for POWERDOWN register */ ++#define POWERDOWN_VALUE (1 << 31) ++ ++/* Bits for TX control */ ++#define TX_CONTROL_INT (1 << 31) ++#define TX_CONTROL_LAST (1 << 30) ++#define TX_CONTROL_CRC (1 << 29) ++#define TX_CONTROL_PAD (1 << 28) ++#define TX_CONTROL_HUGE (1 << 27) ++#define TX_CONTROL_OVERRIDE (1 << 26) ++ ++/* these flags used for non-last fragment of a frame */ ++#define TX_CONTROL_ALL_NOTLAST (TX_CONTROL_CRC | TX_CONTROL_PAD | TX_CONTROL_OVERRIDE) ++/* these flags used for last fragment of a frame, and for single-fragment ++ * frames */ ++#define TX_CONTROL_ALL_LAST (TX_CONTROL_ALL_NOTLAST | TX_CONTROL_LAST | TX_CONTROL_INT) ++ ++/* Bits for TX status */ ++#define TX_STATUS_ERROR (1 << 31) ++#define TX_STATUS_UNDERRUN (1 << 29) ++#define TX_STATUS_LATE_COLLISION (1 << 28) ++#define TX_STATUS_MANY_COLLISIONS (1 << 27) ++#define TX_STATUS_MANY_DEFER (1 << 26) ++#define TX_STATUS_COLLISIONS(s) ((s >> 21) & 15) ++ ++/* Bits for RX control */ ++#define RX_CONTROL_INT (1 << 31) ++ ++/* Bits for RX status */ ++#define RX_STATUS_ERROR (1 << 31) ++#define RX_STATUS_LAST_FRAG (1 << 30) ++#define RX_STATUS_OVERRUN (1 << 28) ++#define RX_STATUS_ALIGNMENT_ERROR (1 << 27) ++#define RX_STATUS_RANGE_ERROR (1 << 26) ++#define RX_STATUS_LENGTH_ERROR (1 << 25) ++#define RX_STATUS_SYMBOL_ERROR (1 << 24) ++#define RX_STATUS_CRC_ERROR (1 << 23) ++#define RX_STATUS_BROADCAST (1 << 22) ++#define RX_STATUS_MULTICAST (1 << 21) ++#define RX_STATUS_FAIL_FILTER (1 << 20) ++#define RX_STATUS_VLAN (1 << 19) ++#define RX_STATUS_CONTROL_FRAME (1 << 18) ++#define RX_STATUS_LENGTH(s) ((s & 0x7ff) + 1) ++ ++/* Bits for RSV register */ ++#define RSV_VLAN (1 << 30) ++#define RSV_CONTROL_FRAME (1 << 27) ++#define RSV_DRIBBLE_NIBBLE (1 << 26) ++#define RSV_BROADCAST (1 << 25) ++#define RSV_MULTICAST (1 << 24) ++#define RSV_LENGTH_OUT_OF_RANGE (1 << 22) ++#define RSV_LENGTH_CHECK_ERROR (1 << 21) ++#define RSV_CRC_ERROR (1 << 20) ++#define RSV_RECEIVE_CODE_VIOLATION (1 << 19) ++#define RSV_MASK 0xFFFF ++ ++static char *mac_address; ++module_param(mac_address, charp, S_IRUGO); ++MODULE_PARM_DESC(mac_address, "MAC address of the device"); ++ ++ ++/* device private data */ ++struct ip3902_descriptor { ++ unsigned long address; ++ unsigned long control; ++}; ++ ++struct ip3902_rx_status { ++ unsigned long status; ++ unsigned long hash_crc; ++}; ++ ++struct ip3902_dma_struct { ++ struct ip3902_descriptor rx_desc[RX_RING_SIZE]; ++ struct ip3902_rx_status rx_status[RX_RING_SIZE]; ++ struct ip3902_descriptor tx_desc[TX_RING_SIZE]; ++ unsigned long tx_status[TX_RING_SIZE]; ++}; ++ ++struct ip3902_private { ++ spinlock_t mii_lock; ++ struct mii_if_info mii; ++ u32 msg_enable; ++ ++ spinlock_t lock; ++ struct net_device *ndev; ++ struct platform_device *pdev; ++ struct resource *bus; ++ void __iomem *mem; ++ struct napi_struct napi; ++ ++ struct ip3902_dma_struct *ds; /* descriptors and statuses */ ++ dma_addr_t ds_dma; ++ ++ struct sk_buff *rx_skb[RX_RING_SIZE]; /* where to recieve to */ ++ struct sk_buff *tx_skb[TX_RING_SIZE]; /* where to send from */ ++ bool tx_first_desc[TX_RING_SIZE]; /* true if this is the first desc of an skb */ ++ ++ int rx_next_allocate; /* index in rx ring where skb should be allocated */ ++ int rx_next_consume; /* index in rx ring where data should be read when available */ ++ int tx_next_produce; /* index in tx ring where new data should be put */ ++ int tx_next_deallocate; /* index in tx ring of first not freed skb */ ++ ++#ifdef CONFIG_INET_LRO ++ bool use_lro; ++ int lro_count; ++ struct net_lro_mgr lro_mgr; ++ struct net_lro_desc lro_desc[MAX_LRO_DESCRIPTORS]; ++ struct timer_list lro_timer; ++#endif ++ ++ unsigned char running; ++ unsigned char resume_open; ++ ++}; ++ ++static inline unsigned long ip3902_read_reg(struct net_device *ndev, int reg) ++{ ++ unsigned long value = readl((void * __iomem)(ndev->base_addr + reg)); ++ return value; ++} ++ ++static inline void ip3902_write_reg(struct net_device *ndev, int reg, ++ unsigned long val) ++{ ++ writel(val, (void * __iomem)(ndev->base_addr + reg)); ++} ++ ++static inline void ip3902_write_tx_desc(struct ip3902_private *ip3902_priv, int pos, unsigned long address, unsigned long control) ++{ ++#if defined(BIG_ENDIAN_DESCRIPTORS) ++ ip3902_priv->ds->tx_desc[pos].address = cpu_to_be32(address); ++ ip3902_priv->ds->tx_desc[pos].control = cpu_to_be32(control); ++#elif defined(LITTLE_ENDIAN_DESCRIPTORS) ++ ip3902_priv->ds->tx_desc[pos].address = cpu_to_le32(address); ++ ip3902_priv->ds->tx_desc[pos].control = cpu_to_le32(control); ++#else ++ ip3902_priv->ds->tx_desc[pos].address = address; ++ ip3902_priv->ds->tx_desc[pos].control = control; ++#endif ++ wmb(); ++} ++ ++static inline void ip3902_read_tx_desc(struct ip3902_private *ip3902_priv, int pos, dma_addr_t *address, int *length) ++{ ++#if defined(BIG_ENDIAN_DESCRIPTORS) ++ *address = (dma_addr_t)be32_to_cpu(ip3902_priv->ds->tx_desc[pos].address); ++ *length = (int)be32_to_cpu(ip3902_priv->ds->tx_desc[pos].control) & 0xffff; ++#elif defined(LITTLE_ENDIAN_DESCRIPTORS) ++ *address = (dma_addr_t)le32_to_cpu(ip3902_priv->ds->tx_desc[pos].address); ++ *length = (int)le32_to_cpu(ip3902_priv->ds->tx_desc[pos].control) & 0xffff; ++#else ++ *address = (dma_addr_t)ip3902_priv->ds->tx_desc[pos].address; ++ *length = (int)ip3902_priv->ds->tx_desc[pos].control & 0xffff; ++#endif ++} ++ ++static inline unsigned long ip3902_read_tx_status(struct ip3902_private *ip3902_priv, int pos) ++{ ++#if defined(BIG_ENDIAN_STATUSES) ++ return be32_to_cpu(ip3902_priv->ds->tx_status[pos]); ++#elif defined(LITTLE_ENDIAN_STATUSES) ++ return le32_to_cpu(ip3902_priv->ds->tx_status[pos]); ++#else ++ return ip3902_priv->ds->tx_status[pos]; ++#endif ++} ++ ++static inline void ip3902_write_rx_desc(struct ip3902_private *ip3902_priv, int pos, unsigned long address, unsigned long control) ++{ ++#if defined(BIG_ENDIAN_DESCRIPTORS) ++ ip3902_priv->ds->rx_desc[pos].address = cpu_to_be32(address); ++ ip3902_priv->ds->rx_desc[pos].control = cpu_to_be32(control); ++#elif defined(LITTLE_ENDIAN_DESCRIPTORS) ++ ip3902_priv->ds->rx_desc[pos].address = cpu_to_le32(address); ++ ip3902_priv->ds->rx_desc[pos].control = cpu_to_le32(control); ++#else ++ ip3902_priv->ds->rx_desc[pos].address = address; ++ ip3902_priv->ds->rx_desc[pos].control = control; ++#endif ++ wmb(); ++} ++ ++static inline void ip3902_read_rx_desc(struct ip3902_private *ip3902_priv, int pos, dma_addr_t *address, int *length) ++{ ++#if defined(BIG_ENDIAN_DESCRIPTORS) ++ *address = (dma_addr_t)be32_to_cpu(ip3902_priv->ds->rx_desc[pos].address); ++ *length = (int)be32_to_cpu(ip3902_priv->ds->rx_desc[pos].control) & 0xffff; ++#elif defined(LITTLE_ENDIAN_DESCRIPTORS) ++ *address = (dma_addr_t)le32_to_cpu(ip3902_priv->ds->rx_desc[pos].address); ++ *length = (int)le32_to_cpu(ip3902_priv->ds->rx_desc[pos].control) & 0xffff; ++#else ++ *address = (dma_addr_t)ip3902_priv->ds->rx_desc[pos].address; ++ *length = (int)ip3902_priv->ds->rx_desc[pos].control & 0xffff; ++#endif ++} ++ ++static inline unsigned long ip3902_read_rx_status(struct net_device *ndev, struct ip3902_private *ip3902_priv, int pos) ++{ ++#if defined(BIG_ENDIAN_STATUSES) ++ return be32_to_cpu(ip3902_priv->ds->rx_status[pos].status); ++#elif defined(LITTLE_ENDIAN_STATUSES) ++ return le32_to_cpu(ip3902_priv->ds->rx_status[pos].status); ++#else ++ return ip3902_priv->ds->rx_status[pos].status; ++#endif ++} ++ ++static inline void ip3902_write_madr_reg(struct net_device *ndev, int phy_id, int location) ++{ ++ /* assume ranges of phy_id and location are correct - we set masks in ++ * struct mii_if_info for that */ ++ ++ unsigned long val = (phy_id << 8) | location; ++ ip3902_write_reg(ndev, MADR_REG, val); ++} ++ ++static inline int ip3902_wait_mdio_op_complete(struct net_device *ndev, unsigned long mask) ++{ ++ int timeout = 10000; /* to avoid hangup in case of unexpected badness ... */ ++ ++ while (--timeout > 0) { ++ if ((ip3902_read_reg(ndev, MIND_REG) & mask) == 0) ++ return 0; ++ udelay(1); ++ } ++ ++ return -EIO; ++} ++ ++static int ip3902_mdio_read(struct net_device *ndev, int phy_id, int location) ++{ ++ ip3902_write_madr_reg(ndev, phy_id, location); ++ ip3902_write_reg(ndev, MCMD_REG, 0); ++ ip3902_write_reg(ndev, MCMD_REG, MCMD_READ); ++ if (ip3902_wait_mdio_op_complete(ndev, MIND_NOT_VALID | MIND_BUSY) < 0) ++ return 0; ++ else ++ return ip3902_read_reg(ndev, MRDD_REG) & 0xffff; ++} ++ ++static void ip3902_mdio_write(struct net_device *ndev, int phy_id, int location, int val) ++{ ++ ip3902_write_madr_reg(ndev, phy_id, location); ++ ip3902_write_reg(ndev, MWTD_REG, val & 0xffff); ++ ip3902_wait_mdio_op_complete(ndev, MIND_BUSY); ++} ++ ++static inline int ip3902_nr_free_descs(int head, int tail, int size) ++{ ++ int free; ++ ++ if (head >= tail) ++ free = (tail + size) - head; ++ else ++ free = tail - head; ++ ++ return free; ++} ++ ++static void ip3902_eth_rx_refill_descs(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ do { ++ int rx_index = ip3902_priv->rx_next_allocate; ++ struct sk_buff *skb = netdev_alloc_skb(ndev, ETH_RX_SKB_SIZE + dma_get_cache_alignment()); ++ ++ if (skb) { ++ int unaligned = (((u32)skb->data) + ETH_HLEN) & (dma_get_cache_alignment() - 1); ++ unsigned long desc_address; ++ ++ if (unaligned) ++ skb_reserve(skb, (dma_get_cache_alignment() - unaligned)); ++ ++ desc_address = dma_map_single(NULL, skb->data, ETH_RX_SKB_SIZE, DMA_FROM_DEVICE); ++ ip3902_write_rx_desc(ip3902_priv, rx_index, desc_address, (ETH_RX_SKB_SIZE - 1) | RX_CONTROL_INT); ++ ++ ip3902_priv->rx_skb[rx_index] = skb; ++ ip3902_priv->rx_next_allocate = NEXT_RX(rx_index); ++ } else { ++ ip3902_write_reg(ndev, RX_CONSUME_INDEX_REG, ip3902_priv->rx_next_allocate); ++ return; ++ } ++ } while (ip3902_priv->rx_next_allocate != ip3902_priv->rx_next_consume); ++ ++ ip3902_write_reg(ndev, RX_CONSUME_INDEX_REG, ip3902_priv->rx_next_allocate); ++} ++ ++static int ip3902_eth_receive_queue(struct net_device *ndev, struct ip3902_private *ip3902_priv, int budget) ++{ ++ int rx_index = ip3902_priv->rx_next_consume; ++ int write_index = ip3902_read_reg(ndev, RX_PRODUCE_INDEX_REG); ++ int received = 0; ++ int limit; ++ ++ do { ++ limit = write_index; ++ spin_lock(&ip3902_priv->lock); ++ while (rx_index != limit) { ++ unsigned long status = ip3902_read_rx_status(ndev, ip3902_priv, rx_index); ++ ++ if (!(status & RX_STATUS_LAST_FRAG)) { ++ printk(DRVNAME ": broken RX status: %08lx\n", status); ++ continue; ++ } ++ ++ if (status & RX_STATUS_FAIL_FILTER) ++ continue; ++ ++ /* Looks like hardware returns RANGE_ERROR for each frame */ ++ if (status & (RX_STATUS_OVERRUN | RX_STATUS_ALIGNMENT_ERROR | RX_STATUS_LENGTH_ERROR | RX_STATUS_CRC_ERROR)) { ++ ndev->stats.rx_errors++; ++ ++ if (status & RX_STATUS_OVERRUN) ++ ndev->stats.rx_fifo_errors++; ++ ++ if (status & RX_STATUS_ALIGNMENT_ERROR) ++ ndev->stats.rx_frame_errors++; ++ ++ if (status & (RX_STATUS_RANGE_ERROR | RX_STATUS_LENGTH_ERROR)) ++ ndev->stats.rx_length_errors++; ++ ++ if (status & RX_STATUS_CRC_ERROR) ++ ndev->stats.rx_crc_errors++; ++ ++ } else { ++ if (--budget < 0) { ++ /* we got packets, but no quota */ ++ /* store current ring pointer state */ ++ ip3902_priv->rx_next_consume = rx_index; ++ return received; ++ } else { ++ struct sk_buff *skb = ip3902_priv->rx_skb[rx_index]; ++ int length = RX_STATUS_LENGTH(status); ++ dma_addr_t data_addr; ++ int data_length; ++ ++ ndev->stats.rx_packets++; ++ ndev->stats.rx_bytes += length; ++ if (status & RX_STATUS_MULTICAST) ++ ndev->stats.multicast++; ++ ++ skb_put(skb, length - BYTES_IN_ETHERNET_CRC); ++ skb->protocol = eth_type_trans(skb, ndev); ++ ++#ifdef CONFIG_INET_LRO ++ if (ip3902_priv->use_lro) ++ lro_receive_skb(&ip3902_priv->lro_mgr, skb, ip3902_priv); ++ else ++ netif_receive_skb(skb); ++ ++ ip3902_priv->lro_count++; ++#else ++ netif_receive_skb(skb); ++#endif ++ ++ ip3902_read_rx_desc(ip3902_priv, rx_index, &data_addr, &data_length); ++ dma_unmap_single(NULL, data_addr, ETH_RX_SKB_SIZE, DMA_FROM_DEVICE); ++ ++ ip3902_priv->rx_skb[rx_index] = NULL; ++ ndev->last_rx = jiffies; ++ received++; ++ } ++ } ++ rx_index = NEXT_RX(rx_index); ++ } ++ ++ spin_unlock(&ip3902_priv->lock); ++ ip3902_priv->rx_next_consume = rx_index; ++ ip3902_eth_rx_refill_descs(ndev, ip3902_priv); ++ write_index = ip3902_read_reg(ndev, RX_PRODUCE_INDEX_REG); ++ } while (limit != write_index); ++ ++#ifdef CONFIG_INET_LRO ++ if (ip3902_priv->use_lro) { ++ if (timer_pending(&ip3902_priv->lro_timer)) { ++ mod_timer(&ip3902_priv->lro_timer, jiffies + 2); ++ } else { ++ ip3902_priv->lro_timer.expires = jiffies + 2; ++ add_timer(&ip3902_priv->lro_timer); ++ } ++ } ++#endif ++ ++ return received; ++} ++ ++static int ip3902_poll(struct napi_struct *napi, int budget) ++{ ++ struct ip3902_private *ip3902_priv = container_of(napi, struct ip3902_private, napi); ++ struct net_device *ndev = ip3902_priv->ndev; ++ int work_done; ++ ++ work_done = ip3902_eth_receive_queue(ndev, ip3902_priv, budget); ++ ++ if (work_done < budget) { ++ ip3902_write_reg(ndev, INT_CLEAR_REG, RX_DONE_INT); ++ ip3902_write_reg(ndev, INT_CLEAR_REG, 0); ++ netif_rx_complete(ndev, napi); ++ ip3902_write_reg(ndev, INT_ENABLE_REG, (TX_UNDERRUN_INT | RX_DONE_INT | RX_OVERRUN_INT)); ++ } ++ ++ return work_done; ++} ++ ++#ifdef CONFIG_INET_LRO ++static void ip3902_lro_timeout(unsigned long data) ++{ ++ struct ip3902_private *ip3902_priv = (struct ip3902_private *)data; ++ ++ spin_lock(&ip3902_priv->lock); ++ if (ip3902_priv->lro_count <= LRO_THRESHOLD) { ++ ip3902_priv->use_lro = false; ++ ip3902_priv->lro_count = 0; ++ } ++ lro_flush_all(&ip3902_priv->lro_mgr); ++ spin_unlock(&ip3902_priv->lock); ++} ++#endif ++ ++#define ip3902_eth_free_completed_tx_descs(ndev, priv) ip3902_eth_free_tx_descs(ndev, priv, 0) ++#define ip3902_eth_free_all_tx_descs(ndev, priv) ip3902_eth_free_tx_descs(ndev, priv, 1) ++ ++static void ip3902_eth_free_tx_descs(struct net_device *ndev, struct ip3902_private *ip3902_priv, int force) ++{ ++ int limit; ++ ++ if (force) ++ limit = ip3902_priv->tx_next_produce; ++ else ++ limit = ip3902_read_reg(ndev, TX_CONSUME_INDEX_REG); ++ ++ while (ip3902_priv->tx_next_deallocate != limit) { ++ int length; ++ int tx_index; ++ unsigned long status; ++ dma_addr_t addr; ++ struct sk_buff *skb; ++ ++ tx_index = ip3902_priv->tx_next_deallocate; ++ ++ ip3902_priv->tx_next_deallocate = NEXT_TX(tx_index); ++ ip3902_read_tx_desc(ip3902_priv, tx_index, &addr, &length); ++ skb = ip3902_priv->tx_skb[tx_index]; ++ ++ status = ip3902_read_tx_status(ip3902_priv, tx_index); ++ if (status & TX_STATUS_ERROR) { ++ ndev->stats.tx_errors++; ++ if (status & TX_STATUS_LATE_COLLISION) ++ ndev->stats.tx_aborted_errors++; ++ ++ if (status & (TX_STATUS_MANY_COLLISIONS | TX_STATUS_MANY_DEFER)) ++ ndev->stats.tx_window_errors++; ++ ++ } else { ++ ndev->stats.tx_packets++; ++ ndev->stats.tx_bytes += skb->len; ++ ndev->stats.collisions += TX_STATUS_COLLISIONS(status); ++ } ++ ++ if (skb) ++ ip3902_priv->tx_skb[tx_index] = NULL; ++ ++ if (ip3902_priv->tx_first_desc[tx_index] == true) ++ dma_unmap_single(NULL, addr, length, DMA_TO_DEVICE); ++ else ++ dma_unmap_page(NULL, addr, length, DMA_TO_DEVICE); ++ ++ if (skb) ++ dev_kfree_skb_irq(skb); ++ } ++} ++ ++static void ip3902_reset_tx(struct net_device *ndev, struct ip3902_private *ip3902_priv, int initial) ++{ ++ unsigned long val; ++ ++ /* Reset Tx hardware */ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val &= ~(COMMAND_TX_RT_ENABLE | COMMAND_TX_ENABLE); ++ val |= COMMAND_TX_RESET; ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ ++ if (!initial) ++ ip3902_eth_free_all_tx_descs(ndev, ip3902_priv); ++ ++ ip3902_priv->tx_next_produce = 0; ++ ip3902_priv->tx_next_deallocate = 0; ++ ++ /* Configure Tx registers */ ++ ip3902_write_reg(ndev, TX_DESC_REG, ip3902_priv->ds_dma + offsetof(struct ip3902_dma_struct, tx_desc)); ++ ip3902_write_reg(ndev, TX_STATUS_REG, ip3902_priv->ds_dma + offsetof(struct ip3902_dma_struct, tx_status)); ++ ip3902_write_reg(ndev, TX_DESC_NUMBER_REG, TX_RING_SIZE - 1); ++ ip3902_write_reg(ndev, TX_PRODUCE_INDEX_REG, ip3902_priv->tx_next_produce); ++ ip3902_write_reg(ndev, TX_CONSUME_INDEX_REG, ip3902_priv->tx_next_deallocate); ++} ++ ++static void ip3902_reset_rx(struct net_device *ndev, struct ip3902_private *ip3902_priv, int init) ++{ ++ unsigned long val; ++ ++ /* Reset Rx hardware */ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val &= ~COMMAND_RX_ENABLE; ++ val |= COMMAND_RX_RESET; ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ ++ /* Set maximum frame size register */ ++ ip3902_write_reg(ndev, MAXF_REG, ETH_RX_SKB_SIZE); ++ ++ if (init) { ++ ip3902_priv->rx_next_allocate = 0; ++ ip3902_priv->rx_next_consume = 0; ++ ip3902_eth_rx_refill_descs(ndev, ip3902_priv); ++ } ++ ++ /* Prepare skb's for Rx (any skb's already prepared will be reused) ++ * and configure Rx registers */ ++ ip3902_write_reg(ndev, RX_DESC_REG, ip3902_priv->ds_dma + offsetof(struct ip3902_dma_struct, rx_desc)); ++ ip3902_write_reg(ndev, RX_STATUS_REG, ip3902_priv->ds_dma + offsetof(struct ip3902_dma_struct, rx_status)); ++ ip3902_write_reg(ndev, RX_DESC_NUMBER_REG, RX_RING_SIZE - 1); ++ ip3902_write_reg(ndev, RX_PRODUCE_INDEX_REG, ip3902_priv->rx_next_consume); ++} ++ ++static inline void ip3902_start_tx(struct net_device *ndev) ++{ ++ unsigned long val; ++ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val |= COMMAND_TX_ENABLE; ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++} ++ ++static inline void ip3902_start_rx(struct net_device *ndev) ++{ ++ unsigned long val; ++ ++ /* First on high-level ... */ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val |= (COMMAND_RX_ENABLE | COMMAND_ALLOW_SHORT); ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ ++ /* ... and then on low-level (after high level is ready to receive) */ ++ val = ip3902_read_reg(ndev, MAC1_REG); ++ val |= MAC1_RECEIVE_ENABLE; /* flow control frames won't be passed to driver */ ++ ip3902_write_reg(ndev, MAC1_REG, val); ++} ++ ++/* Interrupt handler body - split out to use both in interrupt handler ++ * and in net poll controller. ++ * ++ * Internal routine, called with lock held. */ ++static void ip3902_do_handle_interrupt(struct net_device *ndev, struct ip3902_private *ip3902_priv, unsigned long status) ++{ ++ ip3902_write_reg(ndev, INT_CLEAR_REG, status); ++ ip3902_write_reg(ndev, INT_CLEAR_REG, 0); ++ ++ if (status & TX_UNDERRUN_INT) { ++ printk(KERN_ERR DRVNAME ": %s: fatal Tx underrun, resetting Tx\n", ndev->name); ++ ip3902_reset_tx(ndev, ip3902_priv, 0); ++ ip3902_start_tx(ndev); ++ } ++ ++ if (status & RX_OVERRUN_INT) { ++ printk(KERN_ERR DRVNAME ": %s: fatal Rx overrun, resetting Rx\n", ndev->name); ++ ip3902_reset_rx(ndev, ip3902_priv, 0); ++ ip3902_start_rx(ndev); ++ } else if (status & RX_DONE_INT) { ++ /* Disable the Rx interrupt */ ++ ip3902_write_reg(ndev, INT_ENABLE_REG, (RX_OVERRUN_INT | TX_UNDERRUN_INT)); ++ netif_rx_schedule(ndev, &ip3902_priv->napi); ++ } ++} ++ ++static irqreturn_t ip3902_interrupt(int irq, void *dev_instance) ++{ ++ struct net_device *ndev = (struct net_device *) dev_instance; ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ unsigned long status; ++ ++ status = ip3902_read_reg(ndev, INT_STATUS_REG) & (TX_DONE_INT | TX_UNDERRUN_INT | RX_DONE_INT | RX_OVERRUN_INT); ++ do { ++ if (!status) { ++ return IRQ_NONE; ++ } else { ++ ip3902_do_handle_interrupt(ndev, ip3902_priv, status); ++ status = ip3902_read_reg(ndev, INT_STATUS_REG) & (TX_DONE_INT | TX_UNDERRUN_INT | RX_DONE_INT | RX_OVERRUN_INT); ++ } ++ } while (status); ++ ++ return IRQ_HANDLED; ++} ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void ip3902_net_poll(struct net_device *ndev) ++{ ++ disable_irq_lockdep(ndev->irq); ++ ip3902_interrupt(ndev->irq, ndev); ++ enable_irq_lockdep(ndev->irq); ++} ++#endif ++ ++static int eth_alloc_tx_desc_index(struct ip3902_private *ip3902_priv) ++{ ++ int tx_desc_curr; ++ ++ tx_desc_curr = ip3902_priv->tx_next_produce; ++ ip3902_priv->tx_next_produce = NEXT_TX(tx_desc_curr); ++ ++ return tx_desc_curr; ++} ++ ++static void eth_tx_fill_frag_descs(struct ip3902_private *ip3902_priv, struct sk_buff *skb) ++{ ++ int frag = 0; ++ int tx_index; ++ ++ do { ++ skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag]; ++ unsigned long desc_address; ++ unsigned long desc_control; ++ ++ tx_index = eth_alloc_tx_desc_index(ip3902_priv); ++ ++ if (frag == (skb_shinfo(skb)->nr_frags - 1)) { ++ desc_control = (this_frag->size - 1) | TX_CONTROL_ALL_NOTLAST; ++ ip3902_priv->tx_skb[tx_index] = skb; ++ } else { ++ desc_control = (this_frag->size - 1) | TX_CONTROL_ALL_LAST; ++ ip3902_priv->tx_skb[tx_index] = NULL; ++ } ++ ++ ip3902_priv->tx_first_desc[tx_index] = false; ++ desc_address = dma_map_page(NULL, this_frag->page, ++ this_frag->page_offset, ++ this_frag->size, ++ DMA_TO_DEVICE); ++ ip3902_write_tx_desc(ip3902_priv, tx_index, desc_address, desc_control); ++ } while (++frag < skb_shinfo(skb)->nr_frags); ++} ++ ++static int ip3902_submit_skb_for_tx(struct net_device *ndev, struct sk_buff *skb) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ int nr_frags; ++ int free_desc; ++ int ret = 0; ++ ++#ifdef CONFIG_INET_LRO ++ if (ip3902_priv->lro_count > LRO_THRESHOLD) ++ ip3902_priv->use_lro = true; ++ ++ ip3902_priv->lro_count = 0; ++#endif ++ ++ free_desc = ip3902_nr_free_descs(ip3902_priv->tx_next_produce, ip3902_priv->tx_next_deallocate, TX_RING_SIZE); ++ nr_frags = skb_shinfo(skb)->nr_frags; ++ ++ if (free_desc <= nr_frags) { ++ ip3902_eth_free_completed_tx_descs(ndev, ip3902_priv); ++ free_desc = ip3902_nr_free_descs(ip3902_priv->tx_next_produce, ip3902_priv->tx_next_deallocate, TX_RING_SIZE); ++ } ++ ++ if (free_desc > nr_frags) { ++ unsigned long desc_address; ++ unsigned long desc_control; ++ int tx_index; ++ int length; ++ ++ tx_index = eth_alloc_tx_desc_index(ip3902_priv); ++ ++ if (nr_frags) { ++ eth_tx_fill_frag_descs(ip3902_priv, skb); ++ length = skb_headlen(skb); ++ desc_control = (length - 1) | TX_CONTROL_ALL_NOTLAST; ++ ip3902_priv->tx_skb[tx_index] = NULL; ++ } else { ++ length = skb->len; ++ desc_control = (length - 1) | TX_CONTROL_ALL_LAST; ++ ip3902_priv->tx_skb[tx_index] = skb; ++ } ++ ++ ip3902_priv->tx_first_desc[tx_index] = true; ++ desc_address = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); ++ ++ ip3902_write_tx_desc(ip3902_priv, tx_index, desc_address, desc_control); ++ ip3902_write_reg(ndev, TX_PRODUCE_INDEX_REG, ip3902_priv->tx_next_produce); ++ ip3902_eth_free_completed_tx_descs(ndev, ip3902_priv); ++ } else { ++ ret = -ENOMEM; ++ } ++ ++ return ret; ++} ++ ++static int ip3902_start_xmit(struct sk_buff *skb, struct net_device *ndev) ++{ ++ int ret; ++ ++ BUG_ON(netif_queue_stopped(ndev)); ++ BUG_ON(skb == NULL); ++ ret = ip3902_submit_skb_for_tx(ndev, skb); ++ ++ if (ret) { ++ printk(KERN_ERR "%s: transmit with queue full\n", ndev->name); ++ netif_stop_queue(ndev); ++ } else { ++ ndev->stats.tx_bytes += skb->len; ++ ndev->stats.tx_packets++; ++ ndev->trans_start = jiffies; ++ } ++ ++ return ret; /* success */ ++} ++ ++static void ip3902_do_set_rx_filter(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ unsigned long creg, freg; ++ ++ creg = ip3902_read_reg(ndev, COMMAND_REG); ++ if (ndev->flags & IFF_PROMISC) { ++ /* If interface is in promiscuous mode, just disable filter */ ++ ip3902_write_reg(ndev, COMMAND_REG, creg | COMMAND_PROMISC); ++ return; ++ } ++ /* Enable filter */ ++ ip3902_write_reg(ndev, COMMAND_REG, creg & ~COMMAND_PROMISC); ++ ++ /* Frames for self address and broadcast frames are always accepted */ ++ freg = FILTER_ACCEPT_SELF | FILTER_ACCEPT_BCAST_ANY; ++ ++ if (ndev->flags & IFF_ALLMULTI) { ++ /* Accept all multicast frames */ ++ freg |= FILTER_ACCEPT_MCAST_ANY; ++ } else if (ndev->mc_count > 0) { ++ /* Accept some multicast frames */ ++ u64 hash_mask = 0; ++ struct dev_mc_list *mc; ++ ++ freg |= FILTER_ACCEPT_MCAST_HASH; ++ for (mc = ndev->mc_list; mc; mc = mc->next) { ++ int b = (ether_crc(ETH_ALEN, mc->dmi_addr) >> 23) & 0x3f; ++ hash_mask |= (1 << b); ++ } ++ ip3902_write_reg(ndev, HASH_FILTER_L_REG, hash_mask & 0xffffffff); ++ ip3902_write_reg(ndev, HASH_FILTER_H_REG, hash_mask >> 32); ++ } ++ ++ ip3902_write_reg(ndev, FILTER_CTRL_REG, freg); ++} ++ ++static void ip3902_set_rx_filter(struct net_device *ndev) ++{ ++ struct ip3902_private *ip3902_priv = (struct ip3902_private *)netdev_priv(ndev); ++ ++ ip3902_do_set_rx_filter(ndev, ip3902_priv); ++} ++ ++static void set_duplex_mode(struct net_device *ndev, int duplex) ++{ ++ unsigned long val; ++ ++ if (duplex) { ++ /* Full Duplex mode */ ++ ++ val = ip3902_read_reg(ndev, MAC2_REG); ++ val |= MAC2_FULL_DUPLEX; ++ ip3902_write_reg(ndev, MAC2_REG, val); ++ ++ ip3902_write_reg(ndev, IPGT_REG, IPGT_FD_VALUE); ++ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val |= COMMAND_FULL_DUPLEX; ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ } else { ++ /* Half Duplex mode */ ++ ++ val = ip3902_read_reg(ndev, MAC2_REG); ++ val &= ~MAC2_FULL_DUPLEX; ++ ip3902_write_reg(ndev, MAC2_REG, val); ++ ++ ip3902_write_reg(ndev, IPGT_REG, IPGT_HD_VALUE); ++ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val &= ~COMMAND_FULL_DUPLEX; ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ } ++} ++ ++static int ip3902_ioctl(struct net_device *ndev, struct ifreq *req, int cmd) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ unsigned int duplex_changed; ++ unsigned long flags; ++ int rc; ++ ++ if (!netif_running(ndev)) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&ip3902_priv->mii_lock, flags); ++ rc = generic_mii_ioctl(&ip3902_priv->mii, if_mii(req), cmd, &duplex_changed); ++ spin_unlock_irqrestore(&ip3902_priv->mii_lock, flags); ++ if (duplex_changed) ++ set_duplex_mode(ndev, ip3902_priv->mii.full_duplex); ++ ++ return rc; ++} ++ ++/* ethtool ops */ ++ ++static void ip3902_get_drvinfo(struct net_device *ndev, ++ struct ethtool_drvinfo *info) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ ++ strcpy(info->driver, DRVNAME); ++ strcpy(info->version, DRVVERSION); ++ strcpy(info->bus_info, ip3902_priv->ndev->name); ++} ++ ++static int ip3902_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ip3902_priv->mii_lock, flags); ++ mii_ethtool_gset(&ip3902_priv->mii, cmd); ++ spin_lock_irqsave(&ip3902_priv->mii_lock, flags); ++ ++ return 0; ++} ++ ++static int ip3902_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ unsigned long flags; ++ int rc; ++ ++ spin_lock_irqsave(&ip3902_priv->mii_lock, flags); ++ rc = mii_ethtool_sset(&ip3902_priv->mii, cmd); ++ spin_lock_irqsave(&ip3902_priv->mii_lock, flags); ++ ++ return rc; ++} ++ ++static int ip3902_nway_reset(struct net_device *ndev) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ return mii_nway_restart(&ip3902_priv->mii); ++} ++ ++static u32 ip3902_get_link(struct net_device *ndev) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ return mii_link_ok(&ip3902_priv->mii); ++} ++ ++static const struct ethtool_ops ip3902_ethtool_ops = { ++ .get_drvinfo = ip3902_get_drvinfo, ++ .get_settings = ip3902_get_settings, ++ .set_settings = ip3902_set_settings, ++ .nway_reset = ip3902_nway_reset, ++ .get_link = ip3902_get_link, ++ .get_sg = ethtool_op_get_sg, ++ .set_sg = ethtool_op_set_sg, ++}; ++ ++/* setup code */ ++ ++static void ip3902_eth_update_mac_address(struct net_device *ndev) ++{ ++ ip3902_write_reg(ndev, SA0_REG, (ndev->dev_addr[5] << 8) | ndev->dev_addr[4]); ++ ip3902_write_reg(ndev, SA1_REG, (ndev->dev_addr[3] << 8) | ndev->dev_addr[2]); ++ ip3902_write_reg(ndev, SA2_REG, (ndev->dev_addr[1] << 8) | ndev->dev_addr[0]); ++} ++ ++static int ip3902_eth_set_mac_address(struct net_device *ndev, void *addr) ++{ ++ int i; ++ ++ for (i = 0; i < 6; i++) ++ /* +2 is for the offset of the HW addr type */ ++ ndev->dev_addr[i] = ((unsigned char *)addr)[i + 2]; ++ ++ ip3902_eth_update_mac_address(ndev); ++ return 0; ++} ++ ++static void ip3902_hw_deinit(struct net_device *ndev) ++{ ++ unsigned long val; ++ ++ /* Stop Rx and Tx hardware and disable interrupts */ ++ val = ip3902_read_reg(ndev, COMMAND_REG); ++ val &= ~(COMMAND_TX_ENABLE | COMMAND_RX_ENABLE); ++ ip3902_write_reg(ndev, COMMAND_REG, val); ++ ip3902_write_reg(ndev, INT_ENABLE_REG, 0); ++ ++ /* Put low-level hardware into reset, and high-level into poweroff */ ++ ip3902_write_reg(ndev, MAC1_REG, MAC1_SOFT_RESET); ++ ip3902_write_reg(ndev, POWERDOWN_REG, POWERDOWN_VALUE); ++} ++ ++static int ethernet_phy_get(struct net_device *ndev) ++{ ++ int addr; ++ ++ for (addr = 1; addr < 32; addr++) { ++ int stat; ++ stat = ip3902_mdio_read(ndev, addr, MII_BMSR); ++ if ((stat != 0) && (stat != 0xffff)) ++ return addr; ++ } ++ printk(KERN_ERR DRVNAME ": could not locate PHY\n"); ++ return -EIO; ++} ++ ++static int ip3902_hw_init(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ int ret = 0; ++ ++ /* Poweron hardware */ ++ ip3902_write_reg(ndev, POWERDOWN_REG, 0); ++ ++ /* Move low level out of reset (also initialize the registers)*/ ++ ip3902_write_reg(ndev, MAC1_REG, 0); ++ ip3902_write_reg(ndev, MAC2_REG, INITIAL_MAC2); ++ ++ ip3902_priv->mii.phy_id = ethernet_phy_get(ndev); ++ ++ if (ip3902_priv->mii.phy_id < 0) { ++ ret = ip3902_priv->mii.phy_id; ++ } else { ++ ip3902_eth_update_mac_address(ndev); ++ ++ /* "Initialize" command register (before resets - those routines ++ * use read-modify-write operations on that register */ ++ ip3902_write_reg(ndev, COMMAND_REG, COMMAND_ALLOW_SHORT); ++ ++ /* Reset and configure Rx and Tx */ ++ ip3902_reset_tx(ndev, ip3902_priv, 1); ++ ip3902_reset_rx(ndev, ip3902_priv, 1); ++ ++ /* Initialize Rx filtering */ ++ ip3902_do_set_rx_filter(ndev, ip3902_priv); ++ ++ /* Clear all interrupts, and enable interesting interrupts */ ++ ip3902_write_reg(ndev, INT_CLEAR_REG, 0xffffffff); ++ ip3902_write_reg(ndev, INT_CLEAR_REG, 0); ++ ip3902_write_reg(ndev, INT_ENABLE_REG, (TX_UNDERRUN_INT | RX_DONE_INT | RX_OVERRUN_INT)); ++ ++ /* Start Tx and Rx hardware */ ++ ip3902_start_tx(ndev); ++ ip3902_start_rx(ndev); ++ } ++ return 0; ++} ++ ++static int ip3902_open(struct net_device *ndev) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ int ret; ++ ++ dev_dbg(&ip3902_priv->ndev->dev, "%s: open\n", ndev->name); ++ ++ ret = request_irq(ndev->irq, ip3902_interrupt, 0, ndev->name, ndev); ++ if (ret) ++ return ret; ++ ++ ret = ip3902_hw_init(ndev, ip3902_priv); ++ ++ if (ret) ++ return ret; ++ ++ mii_check_media(&ip3902_priv->mii, netif_msg_link(ip3902_priv), 1); ++ set_duplex_mode(ndev, ip3902_priv->mii.full_duplex); ++ ++#ifdef CONFIG_INET_LRO ++ init_timer(&ip3902_priv->lro_timer); ++ ip3902_priv->lro_timer.data = (unsigned long) ip3902_priv; ++ ip3902_priv->lro_timer.function = ip3902_lro_timeout; ++#endif ++ ++ netif_start_queue(ndev); ++ napi_enable(&ip3902_priv->napi); ++ ++ ip3902_priv->running = 1; ++ ++ return 0; ++} ++ ++static int ip3902_close(struct net_device *ndev) ++{ ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ ++ dev_dbg(&ip3902_priv->ndev->dev, "%s: close\n", ndev->name); ++ ++ ip3902_priv->running = 0; ++ wmb(); ++ ++#ifdef CONFIG_INET_LRO ++ del_timer(&ip3902_priv->lro_timer); ++#endif ++ ++ napi_disable(&ip3902_priv->napi); ++ ++ ip3902_hw_deinit(ndev); ++ ++ netif_stop_queue(ndev); ++ ++ ip3902_eth_free_all_tx_descs(ndev, ip3902_priv); ++ ++ free_irq(ndev->irq, ndev); ++ return 0; ++} ++ ++static int parse_mac_address(struct net_device *ndev) ++{ ++ int n = sscanf(mac_address, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", ++ &ndev->dev_addr[0], &ndev->dev_addr[1], ++ &ndev->dev_addr[2], &ndev->dev_addr[3], ++ &ndev->dev_addr[4], &ndev->dev_addr[5]); ++ ++ if (n == 6) ++ return 0; ++ ++ printk(KERN_WARNING DRVNAME": failed to parse mac address string \"%s\"\n", mac_address); ++ return -EINVAL; ++} ++ ++static void ip3902_hw_shutdown(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ dma_free_coherent(NULL, sizeof(*(ip3902_priv->ds)), ip3902_priv->ds, ip3902_priv->ds_dma); ++} ++ ++static int ip3902_hw_startup(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ ip3902_priv->ds = dma_alloc_coherent(NULL, sizeof(*(ip3902_priv->ds)), &ip3902_priv->ds_dma, GFP_KERNEL); ++ if (!ip3902_priv->ds) { ++ printk(KERN_ERR DRVNAME ": can't allocate DMA structure\n"); ++ ip3902_hw_shutdown(ndev, ip3902_priv); ++ return -ENOMEM; ++ } ++ ++ /* Poweron hardware */ ++ ip3902_write_reg(ndev, POWERDOWN_REG, 0); ++ ++ /* set mii clock */ ++ ip3902_write_reg(ndev, MCFG_REG, 0x1c); ++ ++ /* Move low level out of reset (also initialize the registers)*/ ++ ip3902_write_reg(ndev, MAC1_REG, 0); ++ ip3902_write_reg(ndev, MAC2_REG, INITIAL_MAC2); ++ ++ if (!mac_address || parse_mac_address(ndev) < 0) { ++ unsigned long val; ++ ++ val = ip3902_read_reg(ndev, SA0_REG); ++ ndev->dev_addr[5] = (val >> 8) & 255; ++ ndev->dev_addr[4] = val & 255; ++ val = ip3902_read_reg(ndev, SA1_REG); ++ ndev->dev_addr[3] = (val >> 8) & 255; ++ ndev->dev_addr[2] = val & 255; ++ val = ip3902_read_reg(ndev, SA2_REG); ++ ndev->dev_addr[1] = (val >> 8) & 255; ++ ndev->dev_addr[0] = val & 255; ++ } ++ ++ /* Put low-level hardware into reset, and high-level into poweroff */ ++ ip3902_write_reg(ndev, MAC1_REG, MAC1_SOFT_RESET); ++ ip3902_write_reg(ndev, POWERDOWN_REG, POWERDOWN_VALUE); ++ ++ return 0; ++} ++ ++static int ip3902_init_dev(struct net_device *ndev, struct ip3902_private *ip3902_priv) ++{ ++ int ret; ++ ++ ret = ip3902_hw_startup(ndev, ip3902_priv); ++ ++ if (!ret) { ++ ndev->hard_start_xmit = ip3902_start_xmit; ++ ndev->set_mac_address = ip3902_eth_set_mac_address; ++ ndev->set_multicast_list = ip3902_set_rx_filter; ++ ndev->open = ip3902_open; ++ ndev->stop = ip3902_close; ++ ndev->do_ioctl = ip3902_ioctl; ++ ndev->features = 0; ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ ndev->poll_controller = ip3902_net_poll; ++#endif ++ SET_ETHTOOL_OPS(ndev, &ip3902_ethtool_ops); ++ ++ ip3902_priv->msg_enable = NETIF_MSG_LINK; ++ ip3902_priv->mii.phy_id_mask = 0x1f; ++ ip3902_priv->mii.reg_num_mask = 0x1f; ++ ip3902_priv->mii.mdio_read = ip3902_mdio_read; ++ ip3902_priv->mii.mdio_write = ip3902_mdio_write; ++ ip3902_priv->mii.dev = ndev; ++ ++ spin_lock_init(&ip3902_priv->lock); ++ ++ ret = register_netdev(ndev); ++ ++ if (ret) ++ ip3902_hw_shutdown(ndev, ip3902_priv); ++ } ++ ++ return ret; ++} ++ ++#ifdef CONFIG_INET_LRO ++static int ip3902_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, u64 *hdr_flags, void *priv) ++{ ++ unsigned int ip_len; ++ struct iphdr *iph; ++ ++ /* non tcp packet */ ++ skb_reset_network_header(skb); ++ iph = ip_hdr(skb); ++ if (iph->protocol != IPPROTO_TCP) ++ return -1; ++ ++ ip_len = ip_hdrlen(skb); ++ skb_set_transport_header(skb, ip_len); ++ *tcph = tcp_hdr(skb); ++ ++ /* check if ip header and tcp header are complete */ ++ if (iph->tot_len < ip_len + tcp_hdrlen(skb)) ++ return -1; ++ ++ *hdr_flags = LRO_IPV4 | LRO_TCP; ++ *iphdr = iph; ++ ++ return 0; ++} ++#endif ++ ++static int ip3902_remove(struct platform_device *pdev) ++{ ++ struct net_device *ndev = platform_get_drvdata(pdev); ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ unregister_netdev(ndev); ++ ++ iounmap(ip3902_priv->mem); ++ release_resource(ip3902_priv->bus); ++ kfree(ip3902_priv->bus); ++ ++ free_netdev(ndev); ++ ++ return 0; ++} ++ ++/* ip3902_probe ++ * ++ * This is the entry point when the platform device system uses to ++ * notify us of a new device to attach to. Allocate memory, find ++ * the resources and information passed, and map the necessary registers. ++*/ ++ ++static int ip3902_probe(struct platform_device *pdev) ++{ ++ struct net_device *ndev; ++ struct ip3902_private *ip3902_priv; ++ struct resource *res; ++ size_t size; ++ int ret; ++ ++ ndev = alloc_etherdev(sizeof(struct ip3902_private)); ++ ++ if (ndev == NULL) ++ return -ENOMEM; ++ ++ ip3902_priv = netdev_priv(ndev); ++ ++ memset(ip3902_priv, 0, sizeof(struct ip3902_private)); ++ ++ spin_lock_init(&ip3902_priv->mii_lock); ++ ++ ip3902_priv->ndev = ndev; ++ ip3902_priv->pdev = pdev; ++ ++ netif_napi_add(ndev, &ip3902_priv->napi, ip3902_poll, IP3902_NAPI_WEIGHT); ++ ++#ifdef CONFIG_INET_LRO ++ ip3902_priv->use_lro = false; ++ ip3902_priv->lro_count = 0; ++ ip3902_priv->lro_mgr.max_aggr = IP3902_NAPI_WEIGHT; ++ ip3902_priv->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS; ++ ip3902_priv->lro_mgr.lro_arr = ip3902_priv->lro_desc; ++ ip3902_priv->lro_mgr.get_skb_header = ip3902_get_skb_hdr; ++ ip3902_priv->lro_mgr.features = LRO_F_NAPI; ++ ip3902_priv->lro_mgr.dev = ndev; ++ ip3902_priv->lro_mgr.ip_summed = 0; ++ ip3902_priv->lro_mgr.ip_summed_aggr = 0; ++#endif ++ ++ platform_set_drvdata(pdev, ndev); ++ ++ /* find the platform resources */ ++ ndev->irq = platform_get_irq(pdev, 0); ++ if (ndev->irq < 0) { ++ dev_err(&pdev->dev, "no IRQ specified\n"); ++ ret = -ENXIO; ++ goto exit_mem; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ dev_err(&pdev->dev, "no MEM specified\n"); ++ ret = -ENXIO; ++ goto exit_mem; ++ } ++ size = (res->end - res->start) + 1; ++ ++ ip3902_priv->bus = request_mem_region(res->start & 0x1fffffff, size, pdev->name); ++ if (ip3902_priv->bus == NULL) { ++ dev_err(&pdev->dev, "cannot reserve registers\n"); ++ ret = -ENXIO; ++ goto exit_mem; ++ } ++ ++ ip3902_priv->mem = ioremap(res->start & 0x1fffffff, size); ++ ndev->base_addr = (unsigned long)ip3902_priv->mem; ++ ++ if (ip3902_priv->mem == NULL) { ++ dev_err(&pdev->dev, "Cannot ioremap area (%08llx,%08llx)\n", ++ (unsigned long long)res->start, ++ (unsigned long long)res->end); ++ ++ ret = -ENXIO; ++ goto exit_req; ++ } ++ ++ SET_NETDEV_DEV(ndev, &pdev->dev); ++ ++ /* got resources, now initialise and register device */ ++ ret = ip3902_init_dev(ndev, ip3902_priv); ++ if (!ret) { ++ printk(KERN_INFO "NXP ip3902 10/100 Ethernet platform driver irq %d base %08lx\n", ndev->irq, ndev->base_addr); ++ return 0; ++ } ++ ++exit_req: ++ release_resource(ip3902_priv->bus); ++ kfree(ip3902_priv->bus); ++ ++exit_mem: ++ free_netdev(ndev); ++ ++ return ret; ++} ++ ++/* suspend and resume */ ++ ++#ifdef CONFIG_PM ++static int ip3902_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct net_device *ndev = platform_get_drvdata(pdev); ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ ++ ip3902_priv->resume_open = ip3902_priv->running; ++ ++ netif_device_detach(ndev); ++ ip3902_close(ndev); ++ ++ return 0; ++} ++ ++static int ip3902_resume(struct platform_device *pdev) ++{ ++ struct net_device *ndev = platform_get_drvdata(pdev); ++ struct ip3902_private *ip3902_priv = netdev_priv(ndev); ++ ++ netif_device_attach(ndev); ++ ++ if (ip3902_priv->resume_open) ++ ip3902_open(ndev); ++ ++ return 0; ++} ++ ++#else ++ #define ip3902_suspend NULL ++ #define ip3902_resume NULL ++#endif ++ ++static struct platform_driver ip3902drv = { ++ .driver = { ++ .name = "ip3902-eth", ++ .owner = THIS_MODULE, ++ }, ++ .probe = ip3902_probe, ++ .remove = ip3902_remove, ++ .suspend = ip3902_suspend, ++ .resume = ip3902_resume, ++}; ++ ++static int __init ip3902drv_init(void) ++{ ++ return platform_driver_register(&ip3902drv); ++} ++ ++static void __exit ip3902drv_exit(void) ++{ ++ platform_driver_unregister(&ip3902drv); ++} ++ ++module_init(ip3902drv_init); ++module_exit(ip3902drv_exit); ++ ++MODULE_DESCRIPTION("NXP IP3902 10/100 Ethernet platform driver"); ++MODULE_AUTHOR("Chris Steel, <chris.steel@nxp.com>"); ++MODULE_LICENSE("GPL v2"); +diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig +index 9fe8cb7..d140375 100644 +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -1882,6 +1882,16 @@ config ATL2 + To compile this driver as a module, choose M here. The module + will be called atl2. + ++config IP3902 ++ tristate "NXP IP3902 ethernet hardware support" ++ depends on SOC_PNX8335 && NET_ETHERNET ++ select MII ++ select CRC32 ++ help ++ This is a driver for NXP IP3902 ethernet hardware found ++ in PNX8335 and probably other SOCs. ++ ++ + source "drivers/net/fs_enet/Kconfig" + + endif # NET_ETHERNET +diff -urN --exclude=.svn linux-2.6.26-rc4.orig/drivers/net/Makefile linux-2.6.26-rc4/drivers/net/Makefile +--- linux-2.6.26-rc4.orig/drivers/net/Makefile 2008-06-03 +10:56:55.000000000 +0100 ++++ linux-2.6.26-rc4/drivers/net/Makefile 2008-06-03 17:17:11.000000000 +0100 +@@ -122,6 +122,7 @@ + obj-$(CONFIG_FORCEDETH) += forcedeth.o + obj-$(CONFIG_NE_H8300) += ne-h8300.o + obj-$(CONFIG_AX88796) += ax88796.o ++obj-$(CONFIG_IP3902) += ip3902.o + + obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o + obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o + diff --git a/recipes/linux/linux-2.6.28/stb225/uImage.patch b/recipes/linux/linux-2.6.28/stb225/uImage.patch new file mode 100644 index 0000000000..f43a221e62 --- /dev/null +++ b/recipes/linux/linux-2.6.28/stb225/uImage.patch @@ -0,0 +1,23 @@ +diff -urN linux-2.6.28.orig/arch/mips/Makefile linux-2.6.28/arch/mips/Makefile +--- linux-2.6.28.orig/arch/mips/Makefile 2009-01-28 16:12:23.000000000 +0200 ++++ linux-2.6.28/arch/mips/Makefile 2009-01-28 16:13:54.000000000 +0200 +@@ -682,6 +682,19 @@ + + all: $(all-y) + ++# Support for U-Boot image creation (from U-Boot README) ++uImage: vmlinux ++ $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux vmlinux.bin ++ rm -f vmlinux.bin.gz ++ gzip -9 vmlinux.bin ++ LA=`$(OBJDUMP) -p vmlinux | sed -n 's/LOAD.*vaddr \([^ ]*\).*/\1/p'`; \ ++ EN=`$(OBJDUMP) -f vmlinux | sed -n 's/.*start address \([^ ]*\).*/\1/p'`; \ ++ echo $$LA; \ ++ echo $$EN; \ ++ mkimage -A mips -O linux -T kernel -C gzip \ ++ -a $$LA -e $$EN -n "Linux Kernel Image" \ ++ -d vmlinux.bin.gz uImage ++ + vmlinux.bin: $(vmlinux-32) + +@$(call makeboot,$@) + diff --git a/recipes/linux/linux-2.6.28/tosa/commit-31c9b28 b/recipes/linux/linux-2.6.28/tosa/commit-31c9b28 new file mode 100644 index 0000000000..0ae09c91ce --- /dev/null +++ b/recipes/linux/linux-2.6.28/tosa/commit-31c9b28 @@ -0,0 +1,67 @@ +commit 31c9b284ae49093fdd9d1e9a347e458c7ebc37a9 +Author: Dmitry Baryshkov <dbaryshkov@gmail.com> +Date: Tue Oct 28 18:40:37 2008 +0300 + + [ARM] pxa/tosa: support tc6393xb/tmiofb. + + Add platform data necessary to support tmiofb on tosa. + + Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> + Signed-off-by: Eric Miao <eric.miao@marvell.com> + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 224897a..366a533 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -733,6 +733,43 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev) + gpio_free(TOSA_GPIO_CARD_VCC_ON); + } + ++static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { ++ { ++ .xres = 480, ++ .yres = 640, ++ .pixclock = 0x002cdf00,/* PLL divisor */ ++ .left_margin = 0x004c, ++ .right_margin = 0x005b, ++ .upper_margin = 0x0001, ++ .lower_margin = 0x000d, ++ .hsync_len = 0x0002, ++ .vsync_len = 0x0001, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ },{ ++ .xres = 240, ++ .yres = 320, ++ .pixclock = 0x00e7f203,/* PLL divisor */ ++ .left_margin = 0x0024, ++ .right_margin = 0x002f, ++ .upper_margin = 0x0001, ++ .lower_margin = 0x000d, ++ .hsync_len = 0x0002, ++ .vsync_len = 0x0001, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++ .vmode = FB_VMODE_NONINTERLACED, ++ } ++}; ++ ++static struct tmio_fb_data tosa_tc6393xb_fb_config = { ++ .lcd_set_power = tc6393xb_lcd_set_power, ++ .lcd_mode = tc6393xb_lcd_mode, ++ .num_modes = ARRAY_SIZE(tosa_tc6393xb_lcd_mode), ++ .modes = &tosa_tc6393xb_lcd_mode[0], ++ .height = 82, ++ .width = 60, ++}; ++ + static struct tc6393xb_platform_data tosa_tc6393xb_data = { + .scr_pll2cr = 0x0cc1, + .scr_gper = 0x3300, +@@ -748,6 +785,7 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = { + .resume = tosa_tc6393xb_resume, + + .nand_data = &tosa_tc6393xb_nand_config, ++ .fb_data = &tosa_tc6393xb_fb_config, + + .resume_restore = 1, + }; diff --git a/recipes/linux/linux-2.6.28/tosa/commit-ddfb33c b/recipes/linux/linux-2.6.28/tosa/commit-ddfb33c new file mode 100644 index 0000000000..4f3278afe3 --- /dev/null +++ b/recipes/linux/linux-2.6.28/tosa/commit-ddfb33c @@ -0,0 +1,39 @@ +commit ddfb33c0ffbd8b8f5984de5a8f9513b88cd28b67 +Author: Dmitry Baryshkov <dbaryshkov@gmail.com> +Date: Thu Nov 27 01:25:09 2008 +0300 + + [ARM] pxa/tosa: fix building w/o TC6393XB driver + + Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> + Signed-off-by: Eric Miao <eric.miao@marvell.com> + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index 366a533..c46b640 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -733,6 +733,7 @@ static void tosa_tc6393xb_teardown(struct platform_device *dev) + gpio_free(TOSA_GPIO_CARD_VCC_ON); + } + ++#ifdef CONFIG_MFD_TC6393XB + static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { + { + .xres = 480, +@@ -769,6 +770,7 @@ static struct tmio_fb_data tosa_tc6393xb_fb_config = { + .height = 82, + .width = 60, + }; ++#endif + + static struct tc6393xb_platform_data tosa_tc6393xb_data = { + .scr_pll2cr = 0x0cc1, +@@ -785,7 +787,9 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = { + .resume = tosa_tc6393xb_resume, + + .nand_data = &tosa_tc6393xb_nand_config, ++#ifdef CONFIG_MFD_TC6393XB + .fb_data = &tosa_tc6393xb_fb_config, ++#endif + + .resume_restore = 1, + }; diff --git a/recipes/linux/linux-2.6.28/tosa/commit-f34ee79 b/recipes/linux/linux-2.6.28/tosa/commit-f34ee79 new file mode 100644 index 0000000000..37522d8aa2 --- /dev/null +++ b/recipes/linux/linux-2.6.28/tosa/commit-f34ee79 @@ -0,0 +1,68 @@ +commit f34ee79a5307e9a4c68c978840cf7e7e10236362 +Author: Dmitry Baryshkov <dbaryshkov@gmail.com> +Date: Tue Nov 25 00:57:27 2008 +0300 + + [ARM] pxa/tosa: add physmap mapping for ROM + + Add mapping for system ROM using physmap-flash mapping. + + Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> + Signed-off-by: Eric Miao <eric.miao@marvell.com> + +diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c +index c46b640..3332e5d 100644 +--- a/arch/arm/mach-pxa/tosa.c ++++ b/arch/arm/mach-pxa/tosa.c +@@ -25,6 +25,7 @@ + #include <linux/mfd/tmio.h> + #include <linux/mtd/nand.h> + #include <linux/mtd/partitions.h> ++#include <linux/mtd/physmap.h> + #include <linux/pm.h> + #include <linux/gpio_keys.h> + #include <linux/input.h> +@@ -831,6 +832,36 @@ static struct spi_board_info spi_board_info[] __initdata = { + }, + }; + ++static struct mtd_partition sharpsl_rom_parts[] = { ++ { ++ .name ="Boot PROM Filesystem", ++ .offset = 0x00160000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct physmap_flash_data sharpsl_rom_data = { ++ .width = 2, ++ .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), ++ .parts = sharpsl_rom_parts, ++}; ++ ++static struct resource sharpsl_rom_resources[] = { ++ { ++ .start = 0x00000000, ++ .end = 0x007fffff, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++static struct platform_device sharpsl_rom_device = { ++ .name = "physmap-flash", ++ .id = -1, ++ .resource = sharpsl_rom_resources, ++ .num_resources = ARRAY_SIZE(sharpsl_rom_resources), ++ .dev.platform_data = &sharpsl_rom_data, ++}; ++ + static struct platform_device *devices[] __initdata = { + &tosascoop_device, + &tosascoop_jc_device, +@@ -840,6 +871,7 @@ static struct platform_device *devices[] __initdata = { + &tosa_gpio_keys_device, + &tosaled_device, + &tosa_bt_device, ++ &sharpsl_rom_device, + }; + + static void tosa_poweroff(void) diff --git a/recipes/linux/linux-2.6.28/wrap/defconfig b/recipes/linux/linux-2.6.28/wrap/defconfig new file mode 100644 index 0000000000..da72892436 --- /dev/null +++ b/recipes/linux/linux-2.6.28/wrap/defconfig @@ -0,0 +1,1704 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28 +# Tue Mar 17 15:09:12 2009 +# +# CONFIG_64BIT is not set +CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y +CONFIG_MMU=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_DEFAULT_IDLE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# Processor type and features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_SMP is not set +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_VSMP is not set +# CONFIG_X86_RDC321X is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP3D is not set +CONFIG_MGEODEGX1=y +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=4 +CONFIG_X86_XADD=y +# CONFIG_X86_PPRO_FENCE is not set +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_ALIGNMENT_16=y +CONFIG_X86_TSC=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_DEBUGCTLMSR=y +# CONFIG_PROCESSOR_SELECT is not set +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_CYRIX_32=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR_32=y +CONFIG_CPU_SUP_TRANSMETA_32=y +CONFIG_CPU_SUP_UMC_32=y +# CONFIG_X86_DS is not set +# CONFIG_HPET_TIMER is not set +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_X86_UP_APIC is not set +# CONFIG_X86_MCE is not set +# CONFIG_VM86 is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_X86_PAE is not set +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set +# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +CONFIG_X86_RESERVE_LOW_64K=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_EFI is not set +# CONFIG_SECCOMP is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_PHYSICAL_START=0x100000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x100000 +# CONFIG_COMPAT_VDSO is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Power management and ACPI options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS is not set +# CONFIG_ACPI_PROCFS_POWER is not set +CONFIG_ACPI_SYSFS_POWER=y +# CONFIG_ACPI_PROC_EVENT is not set +# CONFIG_ACPI_AC is not set +# CONFIG_ACPI_BATTERY is not set +# CONFIG_ACPI_BUTTON is not set +# CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set +# CONFIG_ACPI_ASUS is not set +# CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_ACPI_SYSTEM=y +CONFIG_X86_PM_TIMER=y +# CONFIG_ACPI_CONTAINER is not set +# CONFIG_ACPI_SBS is not set +# CONFIG_APM is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=m +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=m +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m + +# +# CPUFreq processor drivers +# +CONFIG_X86_ACPI_CPUFREQ=m +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +# CONFIG_X86_POWERNOW_K8 is not set +CONFIG_X86_GX_SUSPMOD=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_LONGRUN is not set +# CONFIG_X86_LONGHAUL is not set +# CONFIG_X86_E_POWERSAVER is not set + +# +# shared options +# +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +# CONFIG_PCI_GOOLPC is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +CONFIG_SCx200=m +CONFIG_SCx200HR_TIMER=m +# CONFIG_OLPC is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats / Emulations +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_HAVE_ATOMIC_IOMAP=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_IDE_TASK_IOCTL is not set +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_CS5535 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +CONFIG_BLK_DEV_SC1200=y +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_IFB is not set +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_SB1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set +# CONFIG_MWAVE is not set +CONFIG_SCx200_GPIO=m +CONFIG_PC8736x_GPIO=m +CONFIG_NSC_GPIO=m +CONFIG_CS5535_GPIO=m +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_SCx200_I2C is not set +CONFIG_SCx200_ACB=m + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=m +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_FSCHMD is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_CORETEMP is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +CONFIG_SENSORS_LM77=m +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_SENSORS_APPLESMC is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_IT87_WDT is not set +# CONFIG_HP_WATCHDOG is not set +CONFIG_SC1200_WDT=m +CONFIG_SCx200_WDT=m +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83697UG_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_NET48XX is not set +CONFIG_LEDS_WRAP=m +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_HP_DISK is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_SYSPROF_TRACER is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_4KSTACKS=y +CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_OPTIMIZE_INLINING is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CRC32C_INTEL is not set +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_AES_586=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SALSA20_586=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +CONFIG_HAVE_KVM=y +# CONFIG_VIRTUALIZATION is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y |